xref: /openbmc/u-boot/drivers/clk/at91/clk-system.c (revision 9d466f2f)
1 /*
2  * Copyright (C) 2016 Atmel Corporation
3  *               Wenyou.Yang <wenyou.yang@atmel.com>
4  *
5  * SPDX-License-Identifier:	GPL-2.0+
6  */
7 
8 #include <common.h>
9 #include <clk-uclass.h>
10 #include <dm.h>
11 #include <linux/io.h>
12 #include <mach/at91_pmc.h>
13 #include "pmc.h"
14 
15 #define SYSTEM_MAX_ID		31
16 
17 /**
18  * at91_system_clk_bind() - for the system clock driver
19  * Recursively bind its children as clk devices.
20  *
21  * @return: 0 on success, or negative error code on failure
22  */
23 static int at91_system_clk_bind(struct udevice *dev)
24 {
25 	return at91_clk_sub_device_bind(dev, "system-clk");
26 }
27 
28 static const struct udevice_id at91_system_clk_match[] = {
29 	{ .compatible = "atmel,at91rm9200-clk-system" },
30 	{}
31 };
32 
33 U_BOOT_DRIVER(at91_system_clk) = {
34 	.name = "at91-system-clk",
35 	.id = UCLASS_MISC,
36 	.of_match = at91_system_clk_match,
37 	.bind = at91_system_clk_bind,
38 };
39 
40 /*----------------------------------------------------------*/
41 
42 static inline int is_pck(int id)
43 {
44 	return (id >= 8) && (id <= 15);
45 }
46 
47 static ulong system_clk_get_rate(struct clk *clk)
48 {
49 	struct clk clk_dev;
50 	int ret;
51 
52 	ret = clk_get_by_index(clk->dev, 0, &clk_dev);
53 	if (ret)
54 		return -EINVAL;
55 
56 	return clk_get_rate(&clk_dev);
57 }
58 
59 static ulong system_clk_set_rate(struct clk *clk, ulong rate)
60 {
61 	struct clk clk_dev;
62 	int ret;
63 
64 	ret = clk_get_by_index(clk->dev, 0, &clk_dev);
65 	if (ret)
66 		return -EINVAL;
67 
68 	return clk_set_rate(&clk_dev, rate);
69 }
70 
71 static int system_clk_enable(struct clk *clk)
72 {
73 	struct pmc_platdata *plat = dev_get_platdata(clk->dev);
74 	struct at91_pmc *pmc = plat->reg_base;
75 	u32 mask;
76 
77 	if (clk->id > SYSTEM_MAX_ID)
78 		return -EINVAL;
79 
80 	mask = BIT(clk->id);
81 
82 	writel(mask, &pmc->scer);
83 
84 	/**
85 	 * For the programmable clocks the Ready status in the PMC
86 	 * status register should be checked after enabling.
87 	 * For other clocks this is unnecessary.
88 	 */
89 	if (!is_pck(clk->id))
90 		return 0;
91 
92 	while (!(readl(&pmc->sr) & mask))
93 		;
94 
95 	return 0;
96 }
97 
98 static struct clk_ops system_clk_ops = {
99 	.of_xlate = at91_clk_of_xlate,
100 	.get_rate = system_clk_get_rate,
101 	.set_rate = system_clk_set_rate,
102 	.enable = system_clk_enable,
103 };
104 
105 U_BOOT_DRIVER(system_clk) = {
106 	.name = "system-clk",
107 	.id = UCLASS_CLK,
108 	.probe = at91_clk_probe,
109 	.platdata_auto_alloc_size = sizeof(struct pmc_platdata),
110 	.ops = &system_clk_ops,
111 };
112