xref: /openbmc/u-boot/drivers/clk/at91/Kconfig (revision b6152676)
1config CLK_AT91
2	bool "AT91 clock drivers"
3	depends on CLK
4	help
5	  This option is used to enable the AT91 clock driver.
6	  The driver supports the AT91 clock generator, including
7	  the oscillators and PLLs, such as main clock, slow clock,
8	  PLLA, UTMI PLL. Clocks can also be a source clock of other
9	  clocks a tree structure, such as master clock, usb device
10	  clock, matrix clock and generic clock.
11	  Devices can use a common clock API to request a particular
12	  clock, enable it and get its rate.
13
14config AT91_UTMI
15	bool "Support UTMI PLL Clock"
16	depends on CLK_AT91
17	help
18	  This option is used to enable the AT91 UTMI PLL clock
19	  driver. It is the clock provider of USB, and UPLLCK is the
20	  output of 480 MHz UTMI PLL, The souce clock of the UTMI
21	  PLL is the main clock, so the main clock must select the
22	  fast crystal oscillator to meet the frequency accuracy
23	  required by USB.
24
25config AT91_H32MX
26	bool "Support H32MX 32-bit Matrix Clock"
27	depends on CLK_AT91
28	help
29	  This option is used to enable the AT91 H32MX matrixes
30	  clock driver. There are H64MX and H32MX matrixes clocks,
31	  H64MX 64-bit matrix clocks are MCK. The H32MX 32-bit
32	  matrix clock is to be configured as MCK if MCK does not
33	  exceed 83 MHz, else it is to be configured as MCK/2.
34
35config AT91_GENERIC_CLK
36	bool "Support Generic Clock"
37	depends on CLK_AT91
38	help
39	  This option is used to enable the AT91 generic clock
40	  driver. Some peripherals may need a second clock source
41	  that may be different from the system clock. This second
42	  clock is the generic clock (GCLK) and is managed by
43	  the PMC via PMC_PCR register.
44