xref: /openbmc/u-boot/drivers/ata/sata_ceva.c (revision 21299d3a)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * (C) Copyright 2015 - 2016 Xilinx, Inc.
4  * Michal Simek <michal.simek@xilinx.com>
5  */
6 #include <common.h>
7 #include <dm.h>
8 #include <ahci.h>
9 #include <scsi.h>
10 #include <asm/arch/hardware.h>
11 
12 #include <asm/io.h>
13 
14 /* Vendor Specific Register Offsets */
15 #define AHCI_VEND_PCFG  0xA4
16 #define AHCI_VEND_PPCFG 0xA8
17 #define AHCI_VEND_PP2C  0xAC
18 #define AHCI_VEND_PP3C  0xB0
19 #define AHCI_VEND_PP4C  0xB4
20 #define AHCI_VEND_PP5C  0xB8
21 #define AHCI_VEND_PAXIC 0xC0
22 #define AHCI_VEND_PTC   0xC8
23 
24 /* Vendor Specific Register bit definitions */
25 #define PAXIC_ADBW_BW64 0x1
26 #define PAXIC_MAWIDD	(1 << 8)
27 #define PAXIC_MARIDD	(1 << 16)
28 #define PAXIC_OTL	(0x4 << 20)
29 
30 #define PCFG_TPSS_VAL	(0x32 << 16)
31 #define PCFG_TPRS_VAL	(0x2 << 12)
32 #define PCFG_PAD_VAL	0x2
33 
34 #define PPCFG_TTA	0x1FFFE
35 #define PPCFG_PSSO_EN	(1 << 28)
36 #define PPCFG_PSS_EN	(1 << 29)
37 #define PPCFG_ESDF_EN	(1 << 31)
38 
39 #define PP2C_CIBGMN	0x0F
40 #define PP2C_CIBGMX	(0x25 << 8)
41 #define PP2C_CIBGN	(0x18 << 16)
42 #define PP2C_CINMP	(0x29 << 24)
43 
44 #define PP3C_CWBGMN	0x04
45 #define PP3C_CWBGMX	(0x0B << 8)
46 #define PP3C_CWBGN	(0x08 << 16)
47 #define PP3C_CWNMP	(0x0F << 24)
48 
49 #define PP4C_BMX	0x0a
50 #define PP4C_BNM	(0x08 << 8)
51 #define PP4C_SFD	(0x4a << 16)
52 #define PP4C_PTST	(0x06 << 24)
53 
54 #define PP5C_RIT	0x60216
55 #define PP5C_RCT	(0x7f0 << 20)
56 
57 #define PTC_RX_WM_VAL	0x40
58 #define PTC_RSVD	(1 << 27)
59 
60 #define PORT0_BASE	0x100
61 #define PORT1_BASE	0x180
62 
63 /* Port Control Register Bit Definitions */
64 #define PORT_SCTL_SPD_GEN3	(0x3 << 4)
65 #define PORT_SCTL_SPD_GEN2	(0x2 << 4)
66 #define PORT_SCTL_SPD_GEN1	(0x1 << 4)
67 #define PORT_SCTL_IPM		(0x3 << 8)
68 
69 #define PORT_BASE	0x100
70 #define PORT_OFFSET	0x80
71 #define NR_PORTS	2
72 #define DRV_NAME	"ahci-ceva"
73 #define CEVA_FLAG_BROKEN_GEN2	1
74 
75 static int ceva_init_sata(ulong mmio)
76 {
77 	ulong tmp;
78 	int i;
79 
80 	/*
81 	 * AXI Data bus width to 64
82 	 * Set Mem Addr Read, Write ID for data transfers
83 	 * Transfer limit to 72 DWord
84 	 */
85 	tmp = PAXIC_ADBW_BW64 | PAXIC_MAWIDD | PAXIC_MARIDD | PAXIC_OTL;
86 	writel(tmp, mmio + AHCI_VEND_PAXIC);
87 
88 	/* Set AHCI Enable */
89 	tmp = readl(mmio + HOST_CTL);
90 	tmp |= HOST_AHCI_EN;
91 	writel(tmp, mmio + HOST_CTL);
92 
93 	for (i = 0; i < NR_PORTS; i++) {
94 		/* TPSS TPRS scalars, CISE and Port Addr */
95 		tmp = PCFG_TPSS_VAL | PCFG_TPRS_VAL | (PCFG_PAD_VAL + i);
96 		writel(tmp, mmio + AHCI_VEND_PCFG);
97 
98 		/* Port Phy Cfg register enables */
99 		tmp = PPCFG_TTA | PPCFG_PSS_EN | PPCFG_ESDF_EN;
100 		writel(tmp, mmio + AHCI_VEND_PPCFG);
101 
102 		/* Rx Watermark setting  */
103 		tmp = PTC_RX_WM_VAL | PTC_RSVD;
104 		writel(tmp, mmio + AHCI_VEND_PTC);
105 
106 		/* Default to Gen 2 Speed and Gen 1 if Gen2 is broken */
107 		tmp = PORT_SCTL_SPD_GEN3 | PORT_SCTL_IPM;
108 		writel(tmp, mmio + PORT_SCR_CTL + PORT_BASE + PORT_OFFSET * i);
109 	}
110 	return 0;
111 }
112 
113 static int sata_ceva_probe(struct udevice *dev)
114 {
115 	int ret;
116 	struct scsi_platdata *plat = dev_get_uclass_platdata(dev);
117 
118 	ceva_init_sata(plat->base);
119 
120 	ret = ahci_init_one_dm(dev);
121 	if (ret)
122 		return ret;
123 
124 	return ahci_start_ports_dm(dev);
125 }
126 
127 static const struct udevice_id sata_ceva_ids[] = {
128 	{ .compatible = "ceva,ahci-1v84" },
129 	{ }
130 };
131 
132 static int sata_ceva_ofdata_to_platdata(struct udevice *dev)
133 {
134 	struct scsi_platdata *plat = dev_get_uclass_platdata(dev);
135 
136 	plat->base = devfdt_get_addr(dev);
137 	if (plat->base == FDT_ADDR_T_NONE)
138 		return -EINVAL;
139 
140 	/* Hardcode number for ceva sata controller */
141 	plat->max_lun = 1; /* Actually two but untested */
142 	plat->max_id = 2;
143 
144 	return 0;
145 }
146 
147 U_BOOT_DRIVER(ceva_host_blk) = {
148 	.name = "ceva_sata",
149 	.id = UCLASS_SCSI,
150 	.of_match = sata_ceva_ids,
151 	.ops = &scsi_ops,
152 	.probe = sata_ceva_probe,
153 	.ofdata_to_platdata = sata_ceva_ofdata_to_platdata,
154 };
155