xref: /openbmc/u-boot/drivers/ata/sata_ceva.c (revision 20b9f2ea)
1 /*
2  * (C) Copyright 2015 - 2016 Xilinx, Inc.
3  * Michal Simek <michal.simek@xilinx.com>
4  *
5  * SPDX-License-Identifier:	GPL-2.0+
6  */
7 #include <common.h>
8 #include <dm.h>
9 #include <ahci.h>
10 #include <scsi.h>
11 #include <asm/arch/hardware.h>
12 
13 #include <asm/io.h>
14 
15 /* Vendor Specific Register Offsets */
16 #define AHCI_VEND_PCFG  0xA4
17 #define AHCI_VEND_PPCFG 0xA8
18 #define AHCI_VEND_PP2C  0xAC
19 #define AHCI_VEND_PP3C  0xB0
20 #define AHCI_VEND_PP4C  0xB4
21 #define AHCI_VEND_PP5C  0xB8
22 #define AHCI_VEND_PAXIC 0xC0
23 #define AHCI_VEND_PTC   0xC8
24 
25 /* Vendor Specific Register bit definitions */
26 #define PAXIC_ADBW_BW64 0x1
27 #define PAXIC_MAWIDD	(1 << 8)
28 #define PAXIC_MARIDD	(1 << 16)
29 #define PAXIC_OTL	(0x4 << 20)
30 
31 #define PCFG_TPSS_VAL	(0x32 << 16)
32 #define PCFG_TPRS_VAL	(0x2 << 12)
33 #define PCFG_PAD_VAL	0x2
34 
35 #define PPCFG_TTA	0x1FFFE
36 #define PPCFG_PSSO_EN	(1 << 28)
37 #define PPCFG_PSS_EN	(1 << 29)
38 #define PPCFG_ESDF_EN	(1 << 31)
39 
40 #define PP2C_CIBGMN	0x0F
41 #define PP2C_CIBGMX	(0x25 << 8)
42 #define PP2C_CIBGN	(0x18 << 16)
43 #define PP2C_CINMP	(0x29 << 24)
44 
45 #define PP3C_CWBGMN	0x04
46 #define PP3C_CWBGMX	(0x0B << 8)
47 #define PP3C_CWBGN	(0x08 << 16)
48 #define PP3C_CWNMP	(0x0F << 24)
49 
50 #define PP4C_BMX	0x0a
51 #define PP4C_BNM	(0x08 << 8)
52 #define PP4C_SFD	(0x4a << 16)
53 #define PP4C_PTST	(0x06 << 24)
54 
55 #define PP5C_RIT	0x60216
56 #define PP5C_RCT	(0x7f0 << 20)
57 
58 #define PTC_RX_WM_VAL	0x40
59 #define PTC_RSVD	(1 << 27)
60 
61 #define PORT0_BASE	0x100
62 #define PORT1_BASE	0x180
63 
64 /* Port Control Register Bit Definitions */
65 #define PORT_SCTL_SPD_GEN3	(0x3 << 4)
66 #define PORT_SCTL_SPD_GEN2	(0x2 << 4)
67 #define PORT_SCTL_SPD_GEN1	(0x1 << 4)
68 #define PORT_SCTL_IPM		(0x3 << 8)
69 
70 #define PORT_BASE	0x100
71 #define PORT_OFFSET	0x80
72 #define NR_PORTS	2
73 #define DRV_NAME	"ahci-ceva"
74 #define CEVA_FLAG_BROKEN_GEN2	1
75 
76 static int ceva_init_sata(ulong mmio)
77 {
78 	ulong tmp;
79 	int i;
80 
81 	/*
82 	 * AXI Data bus width to 64
83 	 * Set Mem Addr Read, Write ID for data transfers
84 	 * Transfer limit to 72 DWord
85 	 */
86 	tmp = PAXIC_ADBW_BW64 | PAXIC_MAWIDD | PAXIC_MARIDD | PAXIC_OTL;
87 	writel(tmp, mmio + AHCI_VEND_PAXIC);
88 
89 	/* Set AHCI Enable */
90 	tmp = readl(mmio + HOST_CTL);
91 	tmp |= HOST_AHCI_EN;
92 	writel(tmp, mmio + HOST_CTL);
93 
94 	for (i = 0; i < NR_PORTS; i++) {
95 		/* TPSS TPRS scalars, CISE and Port Addr */
96 		tmp = PCFG_TPSS_VAL | PCFG_TPRS_VAL | (PCFG_PAD_VAL + i);
97 		writel(tmp, mmio + AHCI_VEND_PCFG);
98 
99 		/* Port Phy Cfg register enables */
100 		tmp = PPCFG_TTA | PPCFG_PSS_EN | PPCFG_ESDF_EN;
101 		writel(tmp, mmio + AHCI_VEND_PPCFG);
102 
103 		/* Rx Watermark setting  */
104 		tmp = PTC_RX_WM_VAL | PTC_RSVD;
105 		writel(tmp, mmio + AHCI_VEND_PTC);
106 
107 		/* Default to Gen 2 Speed and Gen 1 if Gen2 is broken */
108 		tmp = PORT_SCTL_SPD_GEN3 | PORT_SCTL_IPM;
109 		writel(tmp, mmio + PORT_SCR_CTL + PORT_BASE + PORT_OFFSET * i);
110 	}
111 	return 0;
112 }
113 
114 static int sata_ceva_probe(struct udevice *dev)
115 {
116 	int ret;
117 	struct scsi_platdata *plat = dev_get_uclass_platdata(dev);
118 
119 	ceva_init_sata(plat->base);
120 
121 	ret = ahci_init_one_dm(dev);
122 	if (ret)
123 		return ret;
124 
125 	return ahci_start_ports_dm(dev);
126 }
127 
128 static const struct udevice_id sata_ceva_ids[] = {
129 	{ .compatible = "ceva,ahci-1v84" },
130 	{ }
131 };
132 
133 static int sata_ceva_ofdata_to_platdata(struct udevice *dev)
134 {
135 	struct scsi_platdata *plat = dev_get_uclass_platdata(dev);
136 
137 	plat->base = devfdt_get_addr(dev);
138 	if (plat->base == FDT_ADDR_T_NONE)
139 		return -EINVAL;
140 
141 	/* Hardcode number for ceva sata controller */
142 	plat->max_lun = 1; /* Actually two but untested */
143 	plat->max_id = 2;
144 
145 	return 0;
146 }
147 
148 U_BOOT_DRIVER(ceva_host_blk) = {
149 	.name = "ceva_sata",
150 	.id = UCLASS_SCSI,
151 	.of_match = sata_ceva_ids,
152 	.ops = &scsi_ops,
153 	.probe = sata_ceva_probe,
154 	.ofdata_to_platdata = sata_ceva_ofdata_to_platdata,
155 };
156