xref: /openbmc/u-boot/drivers/ata/fsl_sata.c (revision f77d4410)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Copyright (C) 2008,2010 Freescale Semiconductor, Inc.
4  *		Dave Liu <daveliu@freescale.com>
5  */
6 
7 #include <common.h>
8 #include <command.h>
9 #include <console.h>
10 #include <asm/io.h>
11 #include <asm/processor.h>
12 #include <asm/fsl_serdes.h>
13 #include <malloc.h>
14 #include <libata.h>
15 #include <fis.h>
16 #include <sata.h>
17 #include "fsl_sata.h"
18 
19 #ifndef CONFIG_SYS_SATA1_FLAGS
20 	#define CONFIG_SYS_SATA1_FLAGS	FLAGS_DMA
21 #endif
22 #ifndef CONFIG_SYS_SATA2_FLAGS
23 	#define CONFIG_SYS_SATA2_FLAGS	FLAGS_DMA
24 #endif
25 
26 static struct fsl_sata_info fsl_sata_info[] = {
27 #ifdef CONFIG_SATA1
28 	{CONFIG_SYS_SATA1, CONFIG_SYS_SATA1_FLAGS},
29 #else
30 	{0, 0},
31 #endif
32 #ifdef CONFIG_SATA2
33 	{CONFIG_SYS_SATA2, CONFIG_SYS_SATA2_FLAGS},
34 #else
35 	{0, 0},
36 #endif
37 };
38 
39 static inline void sdelay(unsigned long sec)
40 {
41 	unsigned long i;
42 	for (i = 0; i < sec; i++)
43 		mdelay(1000);
44 }
45 
46 static void fsl_sata_dump_sfis(struct sata_fis_d2h *s)
47 {
48 	printf("Status FIS dump:\n\r");
49 	printf("fis_type:		%02x\n\r", s->fis_type);
50 	printf("pm_port_i:		%02x\n\r", s->pm_port_i);
51 	printf("status:			%02x\n\r", s->status);
52 	printf("error:			%02x\n\r", s->error);
53 	printf("lba_low:		%02x\n\r", s->lba_low);
54 	printf("lba_mid:		%02x\n\r", s->lba_mid);
55 	printf("lba_high:		%02x\n\r", s->lba_high);
56 	printf("device:			%02x\n\r", s->device);
57 	printf("lba_low_exp:		%02x\n\r", s->lba_low_exp);
58 	printf("lba_mid_exp:		%02x\n\r", s->lba_mid_exp);
59 	printf("lba_high_exp:		%02x\n\r", s->lba_high_exp);
60 	printf("res1:			%02x\n\r", s->res1);
61 	printf("sector_count:		%02x\n\r", s->sector_count);
62 	printf("sector_count_exp:	%02x\n\r", s->sector_count_exp);
63 }
64 
65 static int ata_wait_register(unsigned __iomem *addr, u32 mask,
66 			 u32 val, u32 timeout_msec)
67 {
68 	int i;
69 	u32 temp;
70 
71 	for (i = 0; (((temp = in_le32(addr)) & mask) != val)
72 			 && i < timeout_msec; i++)
73 		mdelay(1);
74 	return (i < timeout_msec) ? 0 : -1;
75 }
76 
77 int init_sata(int dev)
78 {
79 	u32 length, align;
80 	cmd_hdr_tbl_t *cmd_hdr;
81 	u32 cda;
82 	u32 val32;
83 	fsl_sata_reg_t __iomem *reg;
84 	u32 sig;
85 	int i;
86 	fsl_sata_t *sata;
87 
88 	if (dev < 0 || dev > (CONFIG_SYS_SATA_MAX_DEVICE - 1)) {
89 		printf("the sata index %d is out of ranges\n\r", dev);
90 		return -1;
91 	}
92 
93 #ifdef CONFIG_MPC85xx
94 	if ((dev == 0) && (!is_serdes_configured(SATA1))) {
95 		printf("SATA%d [dev = %d] is not enabled\n", dev+1, dev);
96 		return -1;
97 	}
98 	if ((dev == 1) && (!is_serdes_configured(SATA2))) {
99 		printf("SATA%d [dev = %d] is not enabled\n", dev+1, dev);
100 		return -1;
101 	}
102 #endif
103 
104 	/* Allocate SATA device driver struct */
105 	sata = (fsl_sata_t *)malloc(sizeof(fsl_sata_t));
106 	if (!sata) {
107 		printf("alloc the sata device struct failed\n\r");
108 		return -1;
109 	}
110 	/* Zero all of the device driver struct */
111 	memset((void *)sata, 0, sizeof(fsl_sata_t));
112 
113 	/* Save the private struct to block device struct */
114 	sata_dev_desc[dev].priv = (void *)sata;
115 
116 	snprintf(sata->name, 12, "SATA%d", dev);
117 
118 	/* Set the controller register base address to device struct */
119 	reg = (fsl_sata_reg_t *)(fsl_sata_info[dev].sata_reg_base);
120 	sata->reg_base = reg;
121 
122 	/* Allocate the command header table, 4 bytes aligned */
123 	length = sizeof(struct cmd_hdr_tbl);
124 	align = SATA_HC_CMD_HDR_TBL_ALIGN;
125 	sata->cmd_hdr_tbl_offset = (void *)malloc(length + align);
126 	if (!sata->cmd_hdr_tbl_offset) {
127 		printf("alloc the command header failed\n\r");
128 		return -1;
129 	}
130 
131 	cmd_hdr = (cmd_hdr_tbl_t *)(((u32)sata->cmd_hdr_tbl_offset + align)
132 						& ~(align - 1));
133 	sata->cmd_hdr = cmd_hdr;
134 
135 	/* Zero all of the command header table */
136 	memset((void *)sata->cmd_hdr_tbl_offset, 0, length + align);
137 
138 	/* Allocate command descriptor for all command */
139 	length = sizeof(struct cmd_desc) * SATA_HC_MAX_CMD;
140 	align = SATA_HC_CMD_DESC_ALIGN;
141 	sata->cmd_desc_offset = (void *)malloc(length + align);
142 	if (!sata->cmd_desc_offset) {
143 		printf("alloc the command descriptor failed\n\r");
144 		return -1;
145 	}
146 	sata->cmd_desc = (cmd_desc_t *)(((u32)sata->cmd_desc_offset + align)
147 						& ~(align - 1));
148 	/* Zero all of command descriptor */
149 	memset((void *)sata->cmd_desc_offset, 0, length + align);
150 
151 	/* Link the command descriptor to command header */
152 	for (i = 0; i < SATA_HC_MAX_CMD; i++) {
153 		cda = ((u32)sata->cmd_desc + SATA_HC_CMD_DESC_SIZE * i)
154 					 & ~(CMD_HDR_CDA_ALIGN - 1);
155 		cmd_hdr->cmd_slot[i].cda = cpu_to_le32(cda);
156 	}
157 
158 	/* To have safe state, force the controller offline */
159 	val32 = in_le32(&reg->hcontrol);
160 	val32 &= ~HCONTROL_ONOFF;
161 	val32 |= HCONTROL_FORCE_OFFLINE;
162 	out_le32(&reg->hcontrol, val32);
163 
164 	/* Wait the controller offline */
165 	ata_wait_register(&reg->hstatus, HSTATUS_ONOFF, 0, 1000);
166 
167 	/* Set the command header base address to CHBA register to tell DMA */
168 	out_le32(&reg->chba, (u32)cmd_hdr & ~0x3);
169 
170 	/* Snoop for the command header */
171 	val32 = in_le32(&reg->hcontrol);
172 	val32 |= HCONTROL_HDR_SNOOP;
173 	out_le32(&reg->hcontrol, val32);
174 
175 	/* Disable all of interrupts */
176 	val32 = in_le32(&reg->hcontrol);
177 	val32 &= ~HCONTROL_INT_EN_ALL;
178 	out_le32(&reg->hcontrol, val32);
179 
180 	/* Clear all of interrupts */
181 	val32 = in_le32(&reg->hstatus);
182 	out_le32(&reg->hstatus, val32);
183 
184 	/* Set the ICC, no interrupt coalescing */
185 	out_le32(&reg->icc, 0x01000000);
186 
187 	/* No PM attatched, the SATA device direct connect */
188 	out_le32(&reg->cqpmp, 0);
189 
190 	/* Clear SError register */
191 	val32 = in_le32(&reg->serror);
192 	out_le32(&reg->serror, val32);
193 
194 	/* Clear CER register */
195 	val32 = in_le32(&reg->cer);
196 	out_le32(&reg->cer, val32);
197 
198 	/* Clear DER register */
199 	val32 = in_le32(&reg->der);
200 	out_le32(&reg->der, val32);
201 
202 	/* No device detection or initialization action requested */
203 	out_le32(&reg->scontrol, 0x00000300);
204 
205 	/* Configure the transport layer, default value */
206 	out_le32(&reg->transcfg, 0x08000016);
207 
208 	/* Configure the link layer, default value */
209 	out_le32(&reg->linkcfg, 0x0000ff34);
210 
211 	/* Bring the controller online */
212 	val32 = in_le32(&reg->hcontrol);
213 	val32 |= HCONTROL_ONOFF;
214 	out_le32(&reg->hcontrol, val32);
215 
216 	mdelay(100);
217 
218 	/* print sata device name */
219 	if (!dev)
220 		printf("%s ", sata->name);
221 	else
222 		printf("       %s ", sata->name);
223 
224 	/* Wait PHY RDY signal changed for 500ms */
225 	ata_wait_register(&reg->hstatus, HSTATUS_PHY_RDY,
226 			  HSTATUS_PHY_RDY, 500);
227 
228 	/* Check PHYRDY */
229 	val32 = in_le32(&reg->hstatus);
230 	if (val32 & HSTATUS_PHY_RDY) {
231 		sata->link = 1;
232 	} else {
233 		sata->link = 0;
234 		printf("(No RDY)\n\r");
235 		return -1;
236 	}
237 
238 	/* Wait for signature updated, which is 1st D2H */
239 	ata_wait_register(&reg->hstatus, HSTATUS_SIGNATURE,
240 			  HSTATUS_SIGNATURE, 10000);
241 
242 	if (val32 & HSTATUS_SIGNATURE) {
243 		sig = in_le32(&reg->sig);
244 		debug("Signature updated, the sig =%08x\n\r", sig);
245 		sata->ata_device_type = ata_dev_classify(sig);
246 	}
247 
248 	/* Check the speed */
249 	val32 = in_le32(&reg->sstatus);
250 	if ((val32 & SSTATUS_SPD_MASK) == SSTATUS_SPD_GEN1)
251 		printf("(1.5 Gbps)\n\r");
252 	else if ((val32 & SSTATUS_SPD_MASK) == SSTATUS_SPD_GEN2)
253 		printf("(3 Gbps)\n\r");
254 
255 	return 0;
256 }
257 
258 int reset_sata(int dev)
259 {
260 	return 0;
261 }
262 
263 static void fsl_sata_dump_regs(fsl_sata_reg_t __iomem *reg)
264 {
265 	printf("\n\rSATA:           %08x\n\r", (u32)reg);
266 	printf("CQR:            %08x\n\r", in_le32(&reg->cqr));
267 	printf("CAR:            %08x\n\r", in_le32(&reg->car));
268 	printf("CCR:            %08x\n\r", in_le32(&reg->ccr));
269 	printf("CER:            %08x\n\r", in_le32(&reg->cer));
270 	printf("CQR:            %08x\n\r", in_le32(&reg->cqr));
271 	printf("DER:            %08x\n\r", in_le32(&reg->der));
272 	printf("CHBA:           %08x\n\r", in_le32(&reg->chba));
273 	printf("HStatus:        %08x\n\r", in_le32(&reg->hstatus));
274 	printf("HControl:       %08x\n\r", in_le32(&reg->hcontrol));
275 	printf("CQPMP:          %08x\n\r", in_le32(&reg->cqpmp));
276 	printf("SIG:            %08x\n\r", in_le32(&reg->sig));
277 	printf("ICC:            %08x\n\r", in_le32(&reg->icc));
278 	printf("SStatus:        %08x\n\r", in_le32(&reg->sstatus));
279 	printf("SError:         %08x\n\r", in_le32(&reg->serror));
280 	printf("SControl:       %08x\n\r", in_le32(&reg->scontrol));
281 	printf("SNotification:  %08x\n\r", in_le32(&reg->snotification));
282 	printf("TransCfg:       %08x\n\r", in_le32(&reg->transcfg));
283 	printf("TransStatus:    %08x\n\r", in_le32(&reg->transstatus));
284 	printf("LinkCfg:        %08x\n\r", in_le32(&reg->linkcfg));
285 	printf("LinkCfg1:       %08x\n\r", in_le32(&reg->linkcfg1));
286 	printf("LinkCfg2:       %08x\n\r", in_le32(&reg->linkcfg2));
287 	printf("LinkStatus:     %08x\n\r", in_le32(&reg->linkstatus));
288 	printf("LinkStatus1:    %08x\n\r", in_le32(&reg->linkstatus1));
289 	printf("PhyCtrlCfg:     %08x\n\r", in_le32(&reg->phyctrlcfg));
290 	printf("SYSPR:          %08x\n\r", in_be32(&reg->syspr));
291 }
292 
293 static int fsl_ata_exec_ata_cmd(struct fsl_sata *sata, struct sata_fis_h2d *cfis,
294 				int is_ncq, int tag, u8 *buffer, u32 len)
295 {
296 	cmd_hdr_entry_t *cmd_hdr;
297 	cmd_desc_t *cmd_desc;
298 	sata_fis_h2d_t *h2d;
299 	prd_entry_t *prde;
300 	u32 ext_c_ddc;
301 	u32 prde_count;
302 	u32 val32;
303 	u32 ttl;
304 	fsl_sata_reg_t __iomem *reg = sata->reg_base;
305 	int i;
306 
307 	/* Check xfer length */
308 	if (len > SATA_HC_MAX_XFER_LEN) {
309 		printf("max transfer length is 64MB\n\r");
310 		return 0;
311 	}
312 
313 	/* Setup the command descriptor */
314 	cmd_desc = sata->cmd_desc + tag;
315 
316 	/* Get the pointer cfis of command descriptor */
317 	h2d = (sata_fis_h2d_t *)cmd_desc->cfis;
318 
319 	/* Zero the cfis of command descriptor */
320 	memset((void *)h2d, 0, SATA_HC_CMD_DESC_CFIS_SIZE);
321 
322 	/* Copy the cfis from user to command descriptor */
323 	h2d->fis_type = cfis->fis_type;
324 	h2d->pm_port_c = cfis->pm_port_c;
325 	h2d->command = cfis->command;
326 
327 	h2d->features = cfis->features;
328 	h2d->features_exp = cfis->features_exp;
329 
330 	h2d->lba_low = cfis->lba_low;
331 	h2d->lba_mid = cfis->lba_mid;
332 	h2d->lba_high = cfis->lba_high;
333 	h2d->lba_low_exp = cfis->lba_low_exp;
334 	h2d->lba_mid_exp = cfis->lba_mid_exp;
335 	h2d->lba_high_exp = cfis->lba_high_exp;
336 
337 	if (!is_ncq) {
338 		h2d->sector_count = cfis->sector_count;
339 		h2d->sector_count_exp = cfis->sector_count_exp;
340 	} else { /* NCQ */
341 		h2d->sector_count = (u8)(tag << 3);
342 	}
343 
344 	h2d->device = cfis->device;
345 	h2d->control = cfis->control;
346 
347 	/* Setup the PRD table */
348 	prde = (prd_entry_t *)cmd_desc->prdt;
349 	memset((void *)prde, 0, sizeof(struct prdt));
350 
351 	prde_count = 0;
352 	ttl = len;
353 	for (i = 0; i < SATA_HC_MAX_PRD_DIRECT; i++) {
354 		if (!len)
355 			break;
356 		prde->dba = cpu_to_le32((u32)buffer & ~0x3);
357 		debug("dba = %08x\n\r", (u32)buffer);
358 
359 		if (len < PRD_ENTRY_MAX_XFER_SZ) {
360 			ext_c_ddc = PRD_ENTRY_DATA_SNOOP | len;
361 			debug("ext_c_ddc1 = %08x, len = %08x\n\r", ext_c_ddc, len);
362 			prde->ext_c_ddc = cpu_to_le32(ext_c_ddc);
363 			prde_count++;
364 			prde++;
365 			break;
366 		} else {
367 			ext_c_ddc = PRD_ENTRY_DATA_SNOOP; /* 4M bytes */
368 			debug("ext_c_ddc2 = %08x, len = %08x\n\r", ext_c_ddc, len);
369 			prde->ext_c_ddc = cpu_to_le32(ext_c_ddc);
370 			buffer += PRD_ENTRY_MAX_XFER_SZ;
371 			len -= PRD_ENTRY_MAX_XFER_SZ;
372 			prde_count++;
373 			prde++;
374 		}
375 	}
376 
377 	/* Setup the command slot of cmd hdr */
378 	cmd_hdr = (cmd_hdr_entry_t *)&sata->cmd_hdr->cmd_slot[tag];
379 
380 	cmd_hdr->cda = cpu_to_le32((u32)cmd_desc & ~0x3);
381 
382 	val32 = prde_count << CMD_HDR_PRD_ENTRY_SHIFT;
383 	val32 |= sizeof(sata_fis_h2d_t);
384 	cmd_hdr->prde_fis_len = cpu_to_le32(val32);
385 
386 	cmd_hdr->ttl = cpu_to_le32(ttl);
387 
388 	if (!is_ncq) {
389 		val32 = CMD_HDR_ATTR_RES | CMD_HDR_ATTR_SNOOP;
390 	} else {
391 		val32 = CMD_HDR_ATTR_RES | CMD_HDR_ATTR_SNOOP | CMD_HDR_ATTR_FPDMA;
392 	}
393 
394 	tag &= CMD_HDR_ATTR_TAG;
395 	val32 |= tag;
396 
397 	debug("attribute = %08x\n\r", val32);
398 	cmd_hdr->attribute = cpu_to_le32(val32);
399 
400 	/* Make sure cmd desc and cmd slot valid before command issue */
401 	sync();
402 
403 	/* PMP*/
404 	val32 = (u32)(h2d->pm_port_c & 0x0f);
405 	out_le32(&reg->cqpmp, val32);
406 
407 	/* Wait no active */
408 	if (ata_wait_register(&reg->car, (1 << tag), 0, 10000))
409 		printf("Wait no active time out\n\r");
410 
411 	/* Issue command */
412 	if (!(in_le32(&reg->cqr) & (1 << tag))) {
413 		val32 = 1 << tag;
414 		out_le32(&reg->cqr, val32);
415 	}
416 
417 	/* Wait command completed for 10s */
418 	if (ata_wait_register(&reg->ccr, (1 << tag), (1 << tag), 10000)) {
419 		if (!is_ncq)
420 			printf("Non-NCQ command time out\n\r");
421 		else
422 			printf("NCQ command time out\n\r");
423 	}
424 
425 	val32 = in_le32(&reg->cer);
426 
427 	if (val32) {
428 		u32 der;
429 		fsl_sata_dump_sfis((struct sata_fis_d2h *)cmd_desc->sfis);
430 		printf("CE at device\n\r");
431 		fsl_sata_dump_regs(reg);
432 		der = in_le32(&reg->der);
433 		out_le32(&reg->cer, val32);
434 		out_le32(&reg->der, der);
435 	}
436 
437 	/* Clear complete flags */
438 	val32 = in_le32(&reg->ccr);
439 	out_le32(&reg->ccr, val32);
440 
441 	return len;
442 }
443 
444 static int fsl_ata_exec_reset_cmd(struct fsl_sata *sata, struct sata_fis_h2d *cfis,
445 				 int tag, u8 *buffer, u32 len)
446 {
447 	return 0;
448 }
449 
450 static int fsl_sata_exec_cmd(struct fsl_sata *sata, struct sata_fis_h2d *cfis,
451 		 enum cmd_type command_type, int tag, u8 *buffer, u32 len)
452 {
453 	int rc;
454 
455 	if (tag > SATA_HC_MAX_CMD || tag < 0) {
456 		printf("tag is out of range, tag=%d\n\r", tag);
457 		return -1;
458 	}
459 
460 	switch (command_type) {
461 	case CMD_ATA:
462 		rc = fsl_ata_exec_ata_cmd(sata, cfis, 0, tag, buffer, len);
463 		return rc;
464 	case CMD_RESET:
465 		rc = fsl_ata_exec_reset_cmd(sata, cfis, tag, buffer, len);
466 		return rc;
467 	case CMD_NCQ:
468 		rc = fsl_ata_exec_ata_cmd(sata, cfis, 1, tag, buffer, len);
469 		return rc;
470 	case CMD_ATAPI:
471 	case CMD_VENDOR_BIST:
472 	case CMD_BIST:
473 		printf("not support now\n\r");
474 		return -1;
475 	default:
476 		break;
477 	}
478 
479 	return -1;
480 }
481 
482 static void fsl_sata_identify(int dev, u16 *id)
483 {
484 	fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
485 	struct sata_fis_h2d h2d, *cfis = &h2d;
486 
487 	memset(cfis, 0, sizeof(struct sata_fis_h2d));
488 
489 	cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
490 	cfis->pm_port_c = 0x80; /* is command */
491 	cfis->command = ATA_CMD_ID_ATA;
492 
493 	fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, (u8 *)id, ATA_ID_WORDS * 2);
494 	ata_swap_buf_le16(id, ATA_ID_WORDS);
495 }
496 
497 static void fsl_sata_xfer_mode(int dev, u16 *id)
498 {
499 	fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
500 
501 	sata->pio = id[ATA_ID_PIO_MODES];
502 	sata->mwdma = id[ATA_ID_MWDMA_MODES];
503 	sata->udma = id[ATA_ID_UDMA_MODES];
504 	debug("pio %04x, mwdma %04x, udma %04x\n\r", sata->pio, sata->mwdma, sata->udma);
505 }
506 
507 static void fsl_sata_set_features(int dev)
508 {
509 	fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
510 	struct sata_fis_h2d h2d, *cfis = &h2d;
511 	u8 udma_cap;
512 
513 	memset(cfis, 0, sizeof(struct sata_fis_h2d));
514 
515 	cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
516 	cfis->pm_port_c = 0x80; /* is command */
517 	cfis->command = ATA_CMD_SET_FEATURES;
518 	cfis->features = SETFEATURES_XFER;
519 
520 	/* First check the device capablity */
521 	udma_cap = (u8)(sata->udma & 0xff);
522 	debug("udma_cap %02x\n\r", udma_cap);
523 
524 	if (udma_cap == ATA_UDMA6)
525 		cfis->sector_count = XFER_UDMA_6;
526 	if (udma_cap == ATA_UDMA5)
527 		cfis->sector_count = XFER_UDMA_5;
528 	if (udma_cap == ATA_UDMA4)
529 		cfis->sector_count = XFER_UDMA_4;
530 	if (udma_cap == ATA_UDMA3)
531 		cfis->sector_count = XFER_UDMA_3;
532 
533 	fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, NULL, 0);
534 }
535 
536 static u32 fsl_sata_rw_cmd(int dev, u32 start, u32 blkcnt, u8 *buffer, int is_write)
537 {
538 	fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
539 	struct sata_fis_h2d h2d, *cfis = &h2d;
540 	u32 block;
541 
542 	block = start;
543 
544 	memset(cfis, 0, sizeof(struct sata_fis_h2d));
545 
546 	cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
547 	cfis->pm_port_c = 0x80; /* is command */
548 	cfis->command = (is_write) ? ATA_CMD_WRITE : ATA_CMD_READ;
549 	cfis->device = ATA_LBA;
550 
551 	cfis->device |= (block >> 24) & 0xf;
552 	cfis->lba_high = (block >> 16) & 0xff;
553 	cfis->lba_mid = (block >> 8) & 0xff;
554 	cfis->lba_low = block & 0xff;
555 	cfis->sector_count = (u8)(blkcnt & 0xff);
556 
557 	fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, buffer, ATA_SECT_SIZE * blkcnt);
558 	return blkcnt;
559 }
560 
561 static void fsl_sata_flush_cache(int dev)
562 {
563 	fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
564 	struct sata_fis_h2d h2d, *cfis = &h2d;
565 
566 	memset(cfis, 0, sizeof(struct sata_fis_h2d));
567 
568 	cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
569 	cfis->pm_port_c = 0x80; /* is command */
570 	cfis->command = ATA_CMD_FLUSH;
571 
572 	fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, NULL, 0);
573 }
574 
575 static u32 fsl_sata_rw_cmd_ext(int dev, u32 start, u32 blkcnt, u8 *buffer, int is_write)
576 {
577 	fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
578 	struct sata_fis_h2d h2d, *cfis = &h2d;
579 	u64 block;
580 
581 	block = (u64)start;
582 
583 	memset(cfis, 0, sizeof(struct sata_fis_h2d));
584 
585 	cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
586 	cfis->pm_port_c = 0x80; /* is command */
587 
588 	cfis->command = (is_write) ? ATA_CMD_WRITE_EXT
589 				 : ATA_CMD_READ_EXT;
590 
591 	cfis->lba_high_exp = (block >> 40) & 0xff;
592 	cfis->lba_mid_exp = (block >> 32) & 0xff;
593 	cfis->lba_low_exp = (block >> 24) & 0xff;
594 	cfis->lba_high = (block >> 16) & 0xff;
595 	cfis->lba_mid = (block >> 8) & 0xff;
596 	cfis->lba_low = block & 0xff;
597 	cfis->device = ATA_LBA;
598 	cfis->sector_count_exp = (blkcnt >> 8) & 0xff;
599 	cfis->sector_count = blkcnt & 0xff;
600 
601 	fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, buffer, ATA_SECT_SIZE * blkcnt);
602 	return blkcnt;
603 }
604 
605 static u32 fsl_sata_rw_ncq_cmd(int dev, u32 start, u32 blkcnt, u8 *buffer,
606 			       int is_write)
607 {
608 	fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
609 	struct sata_fis_h2d h2d, *cfis = &h2d;
610 	int ncq_channel;
611 	u64 block;
612 
613 	if (sata->lba48 != 1) {
614 		printf("execute FPDMA command on non-LBA48 hard disk\n\r");
615 		return -1;
616 	}
617 
618 	block = (u64)start;
619 
620 	memset(cfis, 0, sizeof(struct sata_fis_h2d));
621 
622 	cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
623 	cfis->pm_port_c = 0x80; /* is command */
624 
625 	cfis->command = (is_write) ? ATA_CMD_FPDMA_WRITE
626 				 : ATA_CMD_FPDMA_READ;
627 
628 	cfis->lba_high_exp = (block >> 40) & 0xff;
629 	cfis->lba_mid_exp = (block >> 32) & 0xff;
630 	cfis->lba_low_exp = (block >> 24) & 0xff;
631 	cfis->lba_high = (block >> 16) & 0xff;
632 	cfis->lba_mid = (block >> 8) & 0xff;
633 	cfis->lba_low = block & 0xff;
634 
635 	cfis->device = ATA_LBA;
636 	cfis->features_exp = (blkcnt >> 8) & 0xff;
637 	cfis->features = blkcnt & 0xff;
638 
639 	if (sata->queue_depth >= SATA_HC_MAX_CMD)
640 		ncq_channel = SATA_HC_MAX_CMD - 1;
641 	else
642 		ncq_channel = sata->queue_depth - 1;
643 
644 	/* Use the latest queue */
645 	fsl_sata_exec_cmd(sata, cfis, CMD_NCQ, ncq_channel, buffer, ATA_SECT_SIZE * blkcnt);
646 	return blkcnt;
647 }
648 
649 static void fsl_sata_flush_cache_ext(int dev)
650 {
651 	fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
652 	struct sata_fis_h2d h2d, *cfis = &h2d;
653 
654 	memset(cfis, 0, sizeof(struct sata_fis_h2d));
655 
656 	cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
657 	cfis->pm_port_c = 0x80; /* is command */
658 	cfis->command = ATA_CMD_FLUSH_EXT;
659 
660 	fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, NULL, 0);
661 }
662 
663 static void fsl_sata_init_wcache(int dev, u16 *id)
664 {
665 	fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
666 
667 	if (ata_id_has_wcache(id) && ata_id_wcache_enabled(id))
668 		sata->wcache = 1;
669 	if (ata_id_has_flush(id))
670 		sata->flush = 1;
671 	if (ata_id_has_flush_ext(id))
672 		sata->flush_ext = 1;
673 }
674 
675 static int fsl_sata_get_wcache(int dev)
676 {
677 	fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
678 	return sata->wcache;
679 }
680 
681 static int fsl_sata_get_flush(int dev)
682 {
683 	fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
684 	return sata->flush;
685 }
686 
687 static int fsl_sata_get_flush_ext(int dev)
688 {
689 	fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
690 	return sata->flush_ext;
691 }
692 
693 static u32 ata_low_level_rw_lba48(int dev, u32 blknr, lbaint_t blkcnt,
694 		const void *buffer, int is_write)
695 {
696 	u32 start, blks;
697 	u8 *addr;
698 	int max_blks;
699 
700 	start = blknr;
701 	blks = blkcnt;
702 	addr = (u8 *)buffer;
703 
704 	max_blks = ATA_MAX_SECTORS_LBA48;
705 	do {
706 		if (blks > max_blks) {
707 			if (fsl_sata_info[dev].flags != FLAGS_FPDMA)
708 				fsl_sata_rw_cmd_ext(dev, start, max_blks, addr, is_write);
709 			else
710 				fsl_sata_rw_ncq_cmd(dev, start, max_blks, addr, is_write);
711 			start += max_blks;
712 			blks -= max_blks;
713 			addr += ATA_SECT_SIZE * max_blks;
714 		} else {
715 			if (fsl_sata_info[dev].flags != FLAGS_FPDMA)
716 				fsl_sata_rw_cmd_ext(dev, start, blks, addr, is_write);
717 			else
718 				fsl_sata_rw_ncq_cmd(dev, start, blks, addr, is_write);
719 			start += blks;
720 			blks = 0;
721 			addr += ATA_SECT_SIZE * blks;
722 		}
723 	} while (blks != 0);
724 
725 	return blkcnt;
726 }
727 
728 static u32 ata_low_level_rw_lba28(int dev, u32 blknr, u32 blkcnt,
729 				  const void *buffer, int is_write)
730 {
731 	u32 start, blks;
732 	u8 *addr;
733 	int max_blks;
734 
735 	start = blknr;
736 	blks = blkcnt;
737 	addr = (u8 *)buffer;
738 
739 	max_blks = ATA_MAX_SECTORS;
740 	do {
741 		if (blks > max_blks) {
742 			fsl_sata_rw_cmd(dev, start, max_blks, addr, is_write);
743 			start += max_blks;
744 			blks -= max_blks;
745 			addr += ATA_SECT_SIZE * max_blks;
746 		} else {
747 			fsl_sata_rw_cmd(dev, start, blks, addr, is_write);
748 			start += blks;
749 			blks = 0;
750 			addr += ATA_SECT_SIZE * blks;
751 		}
752 	} while (blks != 0);
753 
754 	return blkcnt;
755 }
756 
757 /*
758  * SATA interface between low level driver and command layer
759  */
760 ulong sata_read(int dev, ulong blknr, lbaint_t blkcnt, void *buffer)
761 {
762 	u32 rc;
763 	fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
764 
765 	if (sata->lba48)
766 		rc = ata_low_level_rw_lba48(dev, blknr, blkcnt, buffer, READ_CMD);
767 	else
768 		rc = ata_low_level_rw_lba28(dev, blknr, blkcnt, buffer, READ_CMD);
769 	return rc;
770 }
771 
772 ulong sata_write(int dev, ulong blknr, lbaint_t blkcnt, const void *buffer)
773 {
774 	u32 rc;
775 	fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
776 
777 	if (sata->lba48) {
778 		rc = ata_low_level_rw_lba48(dev, blknr, blkcnt, buffer, WRITE_CMD);
779 		if (fsl_sata_get_wcache(dev) && fsl_sata_get_flush_ext(dev))
780 			fsl_sata_flush_cache_ext(dev);
781 	} else {
782 		rc = ata_low_level_rw_lba28(dev, blknr, blkcnt, buffer, WRITE_CMD);
783 		if (fsl_sata_get_wcache(dev) && fsl_sata_get_flush(dev))
784 			fsl_sata_flush_cache(dev);
785 	}
786 	return rc;
787 }
788 
789 int scan_sata(int dev)
790 {
791 	fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
792 	unsigned char serial[ATA_ID_SERNO_LEN + 1];
793 	unsigned char firmware[ATA_ID_FW_REV_LEN + 1];
794 	unsigned char product[ATA_ID_PROD_LEN + 1];
795 	u16 *id;
796 	u64 n_sectors;
797 
798 	/* if no detected link */
799 	if (!sata->link)
800 		return -1;
801 
802 	id = (u16 *)malloc(ATA_ID_WORDS * 2);
803 	if (!id) {
804 		printf("id malloc failed\n\r");
805 		return -1;
806 	}
807 
808 	/* Identify device to get information */
809 	fsl_sata_identify(dev, id);
810 
811 	/* Serial number */
812 	ata_id_c_string(id, serial, ATA_ID_SERNO, sizeof(serial));
813 	memcpy(sata_dev_desc[dev].product, serial, sizeof(serial));
814 
815 	/* Firmware version */
816 	ata_id_c_string(id, firmware, ATA_ID_FW_REV, sizeof(firmware));
817 	memcpy(sata_dev_desc[dev].revision, firmware, sizeof(firmware));
818 
819 	/* Product model */
820 	ata_id_c_string(id, product, ATA_ID_PROD, sizeof(product));
821 	memcpy(sata_dev_desc[dev].vendor, product, sizeof(product));
822 
823 	/* Totoal sectors */
824 	n_sectors = ata_id_n_sectors(id);
825 	sata_dev_desc[dev].lba = (u32)n_sectors;
826 
827 #ifdef CONFIG_LBA48
828 	/* Check if support LBA48 */
829 	if (ata_id_has_lba48(id)) {
830 		sata->lba48 = 1;
831 		debug("Device support LBA48\n\r");
832 	} else
833 		debug("Device supports LBA28\n\r");
834 #endif
835 
836 	/* Get the NCQ queue depth from device */
837 	sata->queue_depth = ata_id_queue_depth(id);
838 
839 	/* Get the xfer mode from device */
840 	fsl_sata_xfer_mode(dev, id);
841 
842 	/* Get the write cache status from device */
843 	fsl_sata_init_wcache(dev, id);
844 
845 	/* Set the xfer mode to highest speed */
846 	fsl_sata_set_features(dev);
847 #ifdef DEBUG
848 	fsl_sata_identify(dev, id);
849 	ata_dump_id(id);
850 #endif
851 	free((void *)id);
852 	return 0;
853 }
854