xref: /openbmc/u-boot/drivers/ata/fsl_sata.c (revision 2ecba112) 
1 /*
2  * Copyright (C) 2008,2010 Freescale Semiconductor, Inc.
3  *		Dave Liu <daveliu@freescale.com>
4  *
5  * SPDX-License-Identifier:	GPL-2.0+
6  */
7 
8 #include <common.h>
9 #include <command.h>
10 #include <console.h>
11 #include <asm/io.h>
12 #include <asm/processor.h>
13 #include <asm/fsl_serdes.h>
14 #include <malloc.h>
15 #include <libata.h>
16 #include <fis.h>
17 #include <sata.h>
18 #include "fsl_sata.h"
19 
20 #ifndef CONFIG_SYS_SATA1_FLAGS
21 	#define CONFIG_SYS_SATA1_FLAGS	FLAGS_DMA
22 #endif
23 #ifndef CONFIG_SYS_SATA2_FLAGS
24 	#define CONFIG_SYS_SATA2_FLAGS	FLAGS_DMA
25 #endif
26 
27 static struct fsl_sata_info fsl_sata_info[] = {
28 #ifdef CONFIG_SATA1
29 	{CONFIG_SYS_SATA1, CONFIG_SYS_SATA1_FLAGS},
30 #else
31 	{0, 0},
32 #endif
33 #ifdef CONFIG_SATA2
34 	{CONFIG_SYS_SATA2, CONFIG_SYS_SATA2_FLAGS},
35 #else
36 	{0, 0},
37 #endif
38 };
39 
40 static inline void sdelay(unsigned long sec)
41 {
42 	unsigned long i;
43 	for (i = 0; i < sec; i++)
44 		mdelay(1000);
45 }
46 
47 static void fsl_sata_dump_sfis(struct sata_fis_d2h *s)
48 {
49 	printf("Status FIS dump:\n\r");
50 	printf("fis_type:		%02x\n\r", s->fis_type);
51 	printf("pm_port_i:		%02x\n\r", s->pm_port_i);
52 	printf("status:			%02x\n\r", s->status);
53 	printf("error:			%02x\n\r", s->error);
54 	printf("lba_low:		%02x\n\r", s->lba_low);
55 	printf("lba_mid:		%02x\n\r", s->lba_mid);
56 	printf("lba_high:		%02x\n\r", s->lba_high);
57 	printf("device:			%02x\n\r", s->device);
58 	printf("lba_low_exp:		%02x\n\r", s->lba_low_exp);
59 	printf("lba_mid_exp:		%02x\n\r", s->lba_mid_exp);
60 	printf("lba_high_exp:		%02x\n\r", s->lba_high_exp);
61 	printf("res1:			%02x\n\r", s->res1);
62 	printf("sector_count:		%02x\n\r", s->sector_count);
63 	printf("sector_count_exp:	%02x\n\r", s->sector_count_exp);
64 }
65 
66 static int ata_wait_register(unsigned __iomem *addr, u32 mask,
67 			 u32 val, u32 timeout_msec)
68 {
69 	int i;
70 	u32 temp;
71 
72 	for (i = 0; (((temp = in_le32(addr)) & mask) != val)
73 			 && i < timeout_msec; i++)
74 		mdelay(1);
75 	return (i < timeout_msec) ? 0 : -1;
76 }
77 
78 int init_sata(int dev)
79 {
80 	u32 length, align;
81 	cmd_hdr_tbl_t *cmd_hdr;
82 	u32 cda;
83 	u32 val32;
84 	fsl_sata_reg_t __iomem *reg;
85 	u32 sig;
86 	int i;
87 	fsl_sata_t *sata;
88 
89 	if (dev < 0 || dev > (CONFIG_SYS_SATA_MAX_DEVICE - 1)) {
90 		printf("the sata index %d is out of ranges\n\r", dev);
91 		return -1;
92 	}
93 
94 #ifdef CONFIG_MPC85xx
95 	if ((dev == 0) && (!is_serdes_configured(SATA1))) {
96 		printf("SATA%d [dev = %d] is not enabled\n", dev+1, dev);
97 		return -1;
98 	}
99 	if ((dev == 1) && (!is_serdes_configured(SATA2))) {
100 		printf("SATA%d [dev = %d] is not enabled\n", dev+1, dev);
101 		return -1;
102 	}
103 #endif
104 
105 	/* Allocate SATA device driver struct */
106 	sata = (fsl_sata_t *)malloc(sizeof(fsl_sata_t));
107 	if (!sata) {
108 		printf("alloc the sata device struct failed\n\r");
109 		return -1;
110 	}
111 	/* Zero all of the device driver struct */
112 	memset((void *)sata, 0, sizeof(fsl_sata_t));
113 
114 	/* Save the private struct to block device struct */
115 	sata_dev_desc[dev].priv = (void *)sata;
116 
117 	snprintf(sata->name, 12, "SATA%d", dev);
118 
119 	/* Set the controller register base address to device struct */
120 	reg = (fsl_sata_reg_t *)(fsl_sata_info[dev].sata_reg_base);
121 	sata->reg_base = reg;
122 
123 	/* Allocate the command header table, 4 bytes aligned */
124 	length = sizeof(struct cmd_hdr_tbl);
125 	align = SATA_HC_CMD_HDR_TBL_ALIGN;
126 	sata->cmd_hdr_tbl_offset = (void *)malloc(length + align);
127 	if (!sata->cmd_hdr_tbl_offset) {
128 		printf("alloc the command header failed\n\r");
129 		return -1;
130 	}
131 
132 	cmd_hdr = (cmd_hdr_tbl_t *)(((u32)sata->cmd_hdr_tbl_offset + align)
133 						& ~(align - 1));
134 	sata->cmd_hdr = cmd_hdr;
135 
136 	/* Zero all of the command header table */
137 	memset((void *)sata->cmd_hdr_tbl_offset, 0, length + align);
138 
139 	/* Allocate command descriptor for all command */
140 	length = sizeof(struct cmd_desc) * SATA_HC_MAX_CMD;
141 	align = SATA_HC_CMD_DESC_ALIGN;
142 	sata->cmd_desc_offset = (void *)malloc(length + align);
143 	if (!sata->cmd_desc_offset) {
144 		printf("alloc the command descriptor failed\n\r");
145 		return -1;
146 	}
147 	sata->cmd_desc = (cmd_desc_t *)(((u32)sata->cmd_desc_offset + align)
148 						& ~(align - 1));
149 	/* Zero all of command descriptor */
150 	memset((void *)sata->cmd_desc_offset, 0, length + align);
151 
152 	/* Link the command descriptor to command header */
153 	for (i = 0; i < SATA_HC_MAX_CMD; i++) {
154 		cda = ((u32)sata->cmd_desc + SATA_HC_CMD_DESC_SIZE * i)
155 					 & ~(CMD_HDR_CDA_ALIGN - 1);
156 		cmd_hdr->cmd_slot[i].cda = cpu_to_le32(cda);
157 	}
158 
159 	/* To have safe state, force the controller offline */
160 	val32 = in_le32(&reg->hcontrol);
161 	val32 &= ~HCONTROL_ONOFF;
162 	val32 |= HCONTROL_FORCE_OFFLINE;
163 	out_le32(&reg->hcontrol, val32);
164 
165 	/* Wait the controller offline */
166 	ata_wait_register(&reg->hstatus, HSTATUS_ONOFF, 0, 1000);
167 
168 	/* Set the command header base address to CHBA register to tell DMA */
169 	out_le32(&reg->chba, (u32)cmd_hdr & ~0x3);
170 
171 	/* Snoop for the command header */
172 	val32 = in_le32(&reg->hcontrol);
173 	val32 |= HCONTROL_HDR_SNOOP;
174 	out_le32(&reg->hcontrol, val32);
175 
176 	/* Disable all of interrupts */
177 	val32 = in_le32(&reg->hcontrol);
178 	val32 &= ~HCONTROL_INT_EN_ALL;
179 	out_le32(&reg->hcontrol, val32);
180 
181 	/* Clear all of interrupts */
182 	val32 = in_le32(&reg->hstatus);
183 	out_le32(&reg->hstatus, val32);
184 
185 	/* Set the ICC, no interrupt coalescing */
186 	out_le32(&reg->icc, 0x01000000);
187 
188 	/* No PM attatched, the SATA device direct connect */
189 	out_le32(&reg->cqpmp, 0);
190 
191 	/* Clear SError register */
192 	val32 = in_le32(&reg->serror);
193 	out_le32(&reg->serror, val32);
194 
195 	/* Clear CER register */
196 	val32 = in_le32(&reg->cer);
197 	out_le32(&reg->cer, val32);
198 
199 	/* Clear DER register */
200 	val32 = in_le32(&reg->der);
201 	out_le32(&reg->der, val32);
202 
203 	/* No device detection or initialization action requested */
204 	out_le32(&reg->scontrol, 0x00000300);
205 
206 	/* Configure the transport layer, default value */
207 	out_le32(&reg->transcfg, 0x08000016);
208 
209 	/* Configure the link layer, default value */
210 	out_le32(&reg->linkcfg, 0x0000ff34);
211 
212 	/* Bring the controller online */
213 	val32 = in_le32(&reg->hcontrol);
214 	val32 |= HCONTROL_ONOFF;
215 	out_le32(&reg->hcontrol, val32);
216 
217 	mdelay(100);
218 
219 	/* print sata device name */
220 	if (!dev)
221 		printf("%s ", sata->name);
222 	else
223 		printf("       %s ", sata->name);
224 
225 	/* Wait PHY RDY signal changed for 500ms */
226 	ata_wait_register(&reg->hstatus, HSTATUS_PHY_RDY,
227 			  HSTATUS_PHY_RDY, 500);
228 
229 	/* Check PHYRDY */
230 	val32 = in_le32(&reg->hstatus);
231 	if (val32 & HSTATUS_PHY_RDY) {
232 		sata->link = 1;
233 	} else {
234 		sata->link = 0;
235 		printf("(No RDY)\n\r");
236 		return -1;
237 	}
238 
239 	/* Wait for signature updated, which is 1st D2H */
240 	ata_wait_register(&reg->hstatus, HSTATUS_SIGNATURE,
241 			  HSTATUS_SIGNATURE, 10000);
242 
243 	if (val32 & HSTATUS_SIGNATURE) {
244 		sig = in_le32(&reg->sig);
245 		debug("Signature updated, the sig =%08x\n\r", sig);
246 		sata->ata_device_type = ata_dev_classify(sig);
247 	}
248 
249 	/* Check the speed */
250 	val32 = in_le32(&reg->sstatus);
251 	if ((val32 & SSTATUS_SPD_MASK) == SSTATUS_SPD_GEN1)
252 		printf("(1.5 Gbps)\n\r");
253 	else if ((val32 & SSTATUS_SPD_MASK) == SSTATUS_SPD_GEN2)
254 		printf("(3 Gbps)\n\r");
255 
256 	return 0;
257 }
258 
259 int reset_sata(int dev)
260 {
261 	return 0;
262 }
263 
264 static void fsl_sata_dump_regs(fsl_sata_reg_t __iomem *reg)
265 {
266 	printf("\n\rSATA:           %08x\n\r", (u32)reg);
267 	printf("CQR:            %08x\n\r", in_le32(&reg->cqr));
268 	printf("CAR:            %08x\n\r", in_le32(&reg->car));
269 	printf("CCR:            %08x\n\r", in_le32(&reg->ccr));
270 	printf("CER:            %08x\n\r", in_le32(&reg->cer));
271 	printf("CQR:            %08x\n\r", in_le32(&reg->cqr));
272 	printf("DER:            %08x\n\r", in_le32(&reg->der));
273 	printf("CHBA:           %08x\n\r", in_le32(&reg->chba));
274 	printf("HStatus:        %08x\n\r", in_le32(&reg->hstatus));
275 	printf("HControl:       %08x\n\r", in_le32(&reg->hcontrol));
276 	printf("CQPMP:          %08x\n\r", in_le32(&reg->cqpmp));
277 	printf("SIG:            %08x\n\r", in_le32(&reg->sig));
278 	printf("ICC:            %08x\n\r", in_le32(&reg->icc));
279 	printf("SStatus:        %08x\n\r", in_le32(&reg->sstatus));
280 	printf("SError:         %08x\n\r", in_le32(&reg->serror));
281 	printf("SControl:       %08x\n\r", in_le32(&reg->scontrol));
282 	printf("SNotification:  %08x\n\r", in_le32(&reg->snotification));
283 	printf("TransCfg:       %08x\n\r", in_le32(&reg->transcfg));
284 	printf("TransStatus:    %08x\n\r", in_le32(&reg->transstatus));
285 	printf("LinkCfg:        %08x\n\r", in_le32(&reg->linkcfg));
286 	printf("LinkCfg1:       %08x\n\r", in_le32(&reg->linkcfg1));
287 	printf("LinkCfg2:       %08x\n\r", in_le32(&reg->linkcfg2));
288 	printf("LinkStatus:     %08x\n\r", in_le32(&reg->linkstatus));
289 	printf("LinkStatus1:    %08x\n\r", in_le32(&reg->linkstatus1));
290 	printf("PhyCtrlCfg:     %08x\n\r", in_le32(&reg->phyctrlcfg));
291 	printf("SYSPR:          %08x\n\r", in_be32(&reg->syspr));
292 }
293 
294 static int fsl_ata_exec_ata_cmd(struct fsl_sata *sata, struct sata_fis_h2d *cfis,
295 				int is_ncq, int tag, u8 *buffer, u32 len)
296 {
297 	cmd_hdr_entry_t *cmd_hdr;
298 	cmd_desc_t *cmd_desc;
299 	sata_fis_h2d_t *h2d;
300 	prd_entry_t *prde;
301 	u32 ext_c_ddc;
302 	u32 prde_count;
303 	u32 val32;
304 	u32 ttl;
305 	fsl_sata_reg_t __iomem *reg = sata->reg_base;
306 	int i;
307 
308 	/* Check xfer length */
309 	if (len > SATA_HC_MAX_XFER_LEN) {
310 		printf("max transfer length is 64MB\n\r");
311 		return 0;
312 	}
313 
314 	/* Setup the command descriptor */
315 	cmd_desc = sata->cmd_desc + tag;
316 
317 	/* Get the pointer cfis of command descriptor */
318 	h2d = (sata_fis_h2d_t *)cmd_desc->cfis;
319 
320 	/* Zero the cfis of command descriptor */
321 	memset((void *)h2d, 0, SATA_HC_CMD_DESC_CFIS_SIZE);
322 
323 	/* Copy the cfis from user to command descriptor */
324 	h2d->fis_type = cfis->fis_type;
325 	h2d->pm_port_c = cfis->pm_port_c;
326 	h2d->command = cfis->command;
327 
328 	h2d->features = cfis->features;
329 	h2d->features_exp = cfis->features_exp;
330 
331 	h2d->lba_low = cfis->lba_low;
332 	h2d->lba_mid = cfis->lba_mid;
333 	h2d->lba_high = cfis->lba_high;
334 	h2d->lba_low_exp = cfis->lba_low_exp;
335 	h2d->lba_mid_exp = cfis->lba_mid_exp;
336 	h2d->lba_high_exp = cfis->lba_high_exp;
337 
338 	if (!is_ncq) {
339 		h2d->sector_count = cfis->sector_count;
340 		h2d->sector_count_exp = cfis->sector_count_exp;
341 	} else { /* NCQ */
342 		h2d->sector_count = (u8)(tag << 3);
343 	}
344 
345 	h2d->device = cfis->device;
346 	h2d->control = cfis->control;
347 
348 	/* Setup the PRD table */
349 	prde = (prd_entry_t *)cmd_desc->prdt;
350 	memset((void *)prde, 0, sizeof(struct prdt));
351 
352 	prde_count = 0;
353 	ttl = len;
354 	for (i = 0; i < SATA_HC_MAX_PRD_DIRECT; i++) {
355 		if (!len)
356 			break;
357 		prde->dba = cpu_to_le32((u32)buffer & ~0x3);
358 		debug("dba = %08x\n\r", (u32)buffer);
359 
360 		if (len < PRD_ENTRY_MAX_XFER_SZ) {
361 			ext_c_ddc = PRD_ENTRY_DATA_SNOOP | len;
362 			debug("ext_c_ddc1 = %08x, len = %08x\n\r", ext_c_ddc, len);
363 			prde->ext_c_ddc = cpu_to_le32(ext_c_ddc);
364 			prde_count++;
365 			prde++;
366 			break;
367 		} else {
368 			ext_c_ddc = PRD_ENTRY_DATA_SNOOP; /* 4M bytes */
369 			debug("ext_c_ddc2 = %08x, len = %08x\n\r", ext_c_ddc, len);
370 			prde->ext_c_ddc = cpu_to_le32(ext_c_ddc);
371 			buffer += PRD_ENTRY_MAX_XFER_SZ;
372 			len -= PRD_ENTRY_MAX_XFER_SZ;
373 			prde_count++;
374 			prde++;
375 		}
376 	}
377 
378 	/* Setup the command slot of cmd hdr */
379 	cmd_hdr = (cmd_hdr_entry_t *)&sata->cmd_hdr->cmd_slot[tag];
380 
381 	cmd_hdr->cda = cpu_to_le32((u32)cmd_desc & ~0x3);
382 
383 	val32 = prde_count << CMD_HDR_PRD_ENTRY_SHIFT;
384 	val32 |= sizeof(sata_fis_h2d_t);
385 	cmd_hdr->prde_fis_len = cpu_to_le32(val32);
386 
387 	cmd_hdr->ttl = cpu_to_le32(ttl);
388 
389 	if (!is_ncq) {
390 		val32 = CMD_HDR_ATTR_RES | CMD_HDR_ATTR_SNOOP;
391 	} else {
392 		val32 = CMD_HDR_ATTR_RES | CMD_HDR_ATTR_SNOOP | CMD_HDR_ATTR_FPDMA;
393 	}
394 
395 	tag &= CMD_HDR_ATTR_TAG;
396 	val32 |= tag;
397 
398 	debug("attribute = %08x\n\r", val32);
399 	cmd_hdr->attribute = cpu_to_le32(val32);
400 
401 	/* Make sure cmd desc and cmd slot valid before command issue */
402 	sync();
403 
404 	/* PMP*/
405 	val32 = (u32)(h2d->pm_port_c & 0x0f);
406 	out_le32(&reg->cqpmp, val32);
407 
408 	/* Wait no active */
409 	if (ata_wait_register(&reg->car, (1 << tag), 0, 10000))
410 		printf("Wait no active time out\n\r");
411 
412 	/* Issue command */
413 	if (!(in_le32(&reg->cqr) & (1 << tag))) {
414 		val32 = 1 << tag;
415 		out_le32(&reg->cqr, val32);
416 	}
417 
418 	/* Wait command completed for 10s */
419 	if (ata_wait_register(&reg->ccr, (1 << tag), (1 << tag), 10000)) {
420 		if (!is_ncq)
421 			printf("Non-NCQ command time out\n\r");
422 		else
423 			printf("NCQ command time out\n\r");
424 	}
425 
426 	val32 = in_le32(&reg->cer);
427 
428 	if (val32) {
429 		u32 der;
430 		fsl_sata_dump_sfis((struct sata_fis_d2h *)cmd_desc->sfis);
431 		printf("CE at device\n\r");
432 		fsl_sata_dump_regs(reg);
433 		der = in_le32(&reg->der);
434 		out_le32(&reg->cer, val32);
435 		out_le32(&reg->der, der);
436 	}
437 
438 	/* Clear complete flags */
439 	val32 = in_le32(&reg->ccr);
440 	out_le32(&reg->ccr, val32);
441 
442 	return len;
443 }
444 
445 static int fsl_ata_exec_reset_cmd(struct fsl_sata *sata, struct sata_fis_h2d *cfis,
446 				 int tag, u8 *buffer, u32 len)
447 {
448 	return 0;
449 }
450 
451 static int fsl_sata_exec_cmd(struct fsl_sata *sata, struct sata_fis_h2d *cfis,
452 		 enum cmd_type command_type, int tag, u8 *buffer, u32 len)
453 {
454 	int rc;
455 
456 	if (tag > SATA_HC_MAX_CMD || tag < 0) {
457 		printf("tag is out of range, tag=%d\n\r", tag);
458 		return -1;
459 	}
460 
461 	switch (command_type) {
462 	case CMD_ATA:
463 		rc = fsl_ata_exec_ata_cmd(sata, cfis, 0, tag, buffer, len);
464 		return rc;
465 	case CMD_RESET:
466 		rc = fsl_ata_exec_reset_cmd(sata, cfis, tag, buffer, len);
467 		return rc;
468 	case CMD_NCQ:
469 		rc = fsl_ata_exec_ata_cmd(sata, cfis, 1, tag, buffer, len);
470 		return rc;
471 	case CMD_ATAPI:
472 	case CMD_VENDOR_BIST:
473 	case CMD_BIST:
474 		printf("not support now\n\r");
475 		return -1;
476 	default:
477 		break;
478 	}
479 
480 	return -1;
481 }
482 
483 static void fsl_sata_identify(int dev, u16 *id)
484 {
485 	fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
486 	struct sata_fis_h2d h2d, *cfis = &h2d;
487 
488 	memset(cfis, 0, sizeof(struct sata_fis_h2d));
489 
490 	cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
491 	cfis->pm_port_c = 0x80; /* is command */
492 	cfis->command = ATA_CMD_ID_ATA;
493 
494 	fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, (u8 *)id, ATA_ID_WORDS * 2);
495 	ata_swap_buf_le16(id, ATA_ID_WORDS);
496 }
497 
498 static void fsl_sata_xfer_mode(int dev, u16 *id)
499 {
500 	fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
501 
502 	sata->pio = id[ATA_ID_PIO_MODES];
503 	sata->mwdma = id[ATA_ID_MWDMA_MODES];
504 	sata->udma = id[ATA_ID_UDMA_MODES];
505 	debug("pio %04x, mwdma %04x, udma %04x\n\r", sata->pio, sata->mwdma, sata->udma);
506 }
507 
508 static void fsl_sata_set_features(int dev)
509 {
510 	fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
511 	struct sata_fis_h2d h2d, *cfis = &h2d;
512 	u8 udma_cap;
513 
514 	memset(cfis, 0, sizeof(struct sata_fis_h2d));
515 
516 	cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
517 	cfis->pm_port_c = 0x80; /* is command */
518 	cfis->command = ATA_CMD_SET_FEATURES;
519 	cfis->features = SETFEATURES_XFER;
520 
521 	/* First check the device capablity */
522 	udma_cap = (u8)(sata->udma & 0xff);
523 	debug("udma_cap %02x\n\r", udma_cap);
524 
525 	if (udma_cap == ATA_UDMA6)
526 		cfis->sector_count = XFER_UDMA_6;
527 	if (udma_cap == ATA_UDMA5)
528 		cfis->sector_count = XFER_UDMA_5;
529 	if (udma_cap == ATA_UDMA4)
530 		cfis->sector_count = XFER_UDMA_4;
531 	if (udma_cap == ATA_UDMA3)
532 		cfis->sector_count = XFER_UDMA_3;
533 
534 	fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, NULL, 0);
535 }
536 
537 static u32 fsl_sata_rw_cmd(int dev, u32 start, u32 blkcnt, u8 *buffer, int is_write)
538 {
539 	fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
540 	struct sata_fis_h2d h2d, *cfis = &h2d;
541 	u32 block;
542 
543 	block = start;
544 
545 	memset(cfis, 0, sizeof(struct sata_fis_h2d));
546 
547 	cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
548 	cfis->pm_port_c = 0x80; /* is command */
549 	cfis->command = (is_write) ? ATA_CMD_WRITE : ATA_CMD_READ;
550 	cfis->device = ATA_LBA;
551 
552 	cfis->device |= (block >> 24) & 0xf;
553 	cfis->lba_high = (block >> 16) & 0xff;
554 	cfis->lba_mid = (block >> 8) & 0xff;
555 	cfis->lba_low = block & 0xff;
556 	cfis->sector_count = (u8)(blkcnt & 0xff);
557 
558 	fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, buffer, ATA_SECT_SIZE * blkcnt);
559 	return blkcnt;
560 }
561 
562 static void fsl_sata_flush_cache(int dev)
563 {
564 	fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
565 	struct sata_fis_h2d h2d, *cfis = &h2d;
566 
567 	memset(cfis, 0, sizeof(struct sata_fis_h2d));
568 
569 	cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
570 	cfis->pm_port_c = 0x80; /* is command */
571 	cfis->command = ATA_CMD_FLUSH;
572 
573 	fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, NULL, 0);
574 }
575 
576 static u32 fsl_sata_rw_cmd_ext(int dev, u32 start, u32 blkcnt, u8 *buffer, int is_write)
577 {
578 	fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
579 	struct sata_fis_h2d h2d, *cfis = &h2d;
580 	u64 block;
581 
582 	block = (u64)start;
583 
584 	memset(cfis, 0, sizeof(struct sata_fis_h2d));
585 
586 	cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
587 	cfis->pm_port_c = 0x80; /* is command */
588 
589 	cfis->command = (is_write) ? ATA_CMD_WRITE_EXT
590 				 : ATA_CMD_READ_EXT;
591 
592 	cfis->lba_high_exp = (block >> 40) & 0xff;
593 	cfis->lba_mid_exp = (block >> 32) & 0xff;
594 	cfis->lba_low_exp = (block >> 24) & 0xff;
595 	cfis->lba_high = (block >> 16) & 0xff;
596 	cfis->lba_mid = (block >> 8) & 0xff;
597 	cfis->lba_low = block & 0xff;
598 	cfis->device = ATA_LBA;
599 	cfis->sector_count_exp = (blkcnt >> 8) & 0xff;
600 	cfis->sector_count = blkcnt & 0xff;
601 
602 	fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, buffer, ATA_SECT_SIZE * blkcnt);
603 	return blkcnt;
604 }
605 
606 static u32 fsl_sata_rw_ncq_cmd(int dev, u32 start, u32 blkcnt, u8 *buffer,
607 			       int is_write)
608 {
609 	fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
610 	struct sata_fis_h2d h2d, *cfis = &h2d;
611 	int ncq_channel;
612 	u64 block;
613 
614 	if (sata->lba48 != 1) {
615 		printf("execute FPDMA command on non-LBA48 hard disk\n\r");
616 		return -1;
617 	}
618 
619 	block = (u64)start;
620 
621 	memset(cfis, 0, sizeof(struct sata_fis_h2d));
622 
623 	cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
624 	cfis->pm_port_c = 0x80; /* is command */
625 
626 	cfis->command = (is_write) ? ATA_CMD_FPDMA_WRITE
627 				 : ATA_CMD_FPDMA_READ;
628 
629 	cfis->lba_high_exp = (block >> 40) & 0xff;
630 	cfis->lba_mid_exp = (block >> 32) & 0xff;
631 	cfis->lba_low_exp = (block >> 24) & 0xff;
632 	cfis->lba_high = (block >> 16) & 0xff;
633 	cfis->lba_mid = (block >> 8) & 0xff;
634 	cfis->lba_low = block & 0xff;
635 
636 	cfis->device = ATA_LBA;
637 	cfis->features_exp = (blkcnt >> 8) & 0xff;
638 	cfis->features = blkcnt & 0xff;
639 
640 	if (sata->queue_depth >= SATA_HC_MAX_CMD)
641 		ncq_channel = SATA_HC_MAX_CMD - 1;
642 	else
643 		ncq_channel = sata->queue_depth - 1;
644 
645 	/* Use the latest queue */
646 	fsl_sata_exec_cmd(sata, cfis, CMD_NCQ, ncq_channel, buffer, ATA_SECT_SIZE * blkcnt);
647 	return blkcnt;
648 }
649 
650 static void fsl_sata_flush_cache_ext(int dev)
651 {
652 	fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
653 	struct sata_fis_h2d h2d, *cfis = &h2d;
654 
655 	memset(cfis, 0, sizeof(struct sata_fis_h2d));
656 
657 	cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
658 	cfis->pm_port_c = 0x80; /* is command */
659 	cfis->command = ATA_CMD_FLUSH_EXT;
660 
661 	fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, NULL, 0);
662 }
663 
664 static void fsl_sata_init_wcache(int dev, u16 *id)
665 {
666 	fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
667 
668 	if (ata_id_has_wcache(id) && ata_id_wcache_enabled(id))
669 		sata->wcache = 1;
670 	if (ata_id_has_flush(id))
671 		sata->flush = 1;
672 	if (ata_id_has_flush_ext(id))
673 		sata->flush_ext = 1;
674 }
675 
676 static int fsl_sata_get_wcache(int dev)
677 {
678 	fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
679 	return sata->wcache;
680 }
681 
682 static int fsl_sata_get_flush(int dev)
683 {
684 	fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
685 	return sata->flush;
686 }
687 
688 static int fsl_sata_get_flush_ext(int dev)
689 {
690 	fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
691 	return sata->flush_ext;
692 }
693 
694 static u32 ata_low_level_rw_lba48(int dev, u32 blknr, lbaint_t blkcnt,
695 		const void *buffer, int is_write)
696 {
697 	u32 start, blks;
698 	u8 *addr;
699 	int max_blks;
700 
701 	start = blknr;
702 	blks = blkcnt;
703 	addr = (u8 *)buffer;
704 
705 	max_blks = ATA_MAX_SECTORS_LBA48;
706 	do {
707 		if (blks > max_blks) {
708 			if (fsl_sata_info[dev].flags != FLAGS_FPDMA)
709 				fsl_sata_rw_cmd_ext(dev, start, max_blks, addr, is_write);
710 			else
711 				fsl_sata_rw_ncq_cmd(dev, start, max_blks, addr, is_write);
712 			start += max_blks;
713 			blks -= max_blks;
714 			addr += ATA_SECT_SIZE * max_blks;
715 		} else {
716 			if (fsl_sata_info[dev].flags != FLAGS_FPDMA)
717 				fsl_sata_rw_cmd_ext(dev, start, blks, addr, is_write);
718 			else
719 				fsl_sata_rw_ncq_cmd(dev, start, blks, addr, is_write);
720 			start += blks;
721 			blks = 0;
722 			addr += ATA_SECT_SIZE * blks;
723 		}
724 	} while (blks != 0);
725 
726 	return blkcnt;
727 }
728 
729 static u32 ata_low_level_rw_lba28(int dev, u32 blknr, u32 blkcnt,
730 				  const void *buffer, int is_write)
731 {
732 	u32 start, blks;
733 	u8 *addr;
734 	int max_blks;
735 
736 	start = blknr;
737 	blks = blkcnt;
738 	addr = (u8 *)buffer;
739 
740 	max_blks = ATA_MAX_SECTORS;
741 	do {
742 		if (blks > max_blks) {
743 			fsl_sata_rw_cmd(dev, start, max_blks, addr, is_write);
744 			start += max_blks;
745 			blks -= max_blks;
746 			addr += ATA_SECT_SIZE * max_blks;
747 		} else {
748 			fsl_sata_rw_cmd(dev, start, blks, addr, is_write);
749 			start += blks;
750 			blks = 0;
751 			addr += ATA_SECT_SIZE * blks;
752 		}
753 	} while (blks != 0);
754 
755 	return blkcnt;
756 }
757 
758 /*
759  * SATA interface between low level driver and command layer
760  */
761 ulong sata_read(int dev, ulong blknr, lbaint_t blkcnt, void *buffer)
762 {
763 	u32 rc;
764 	fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
765 
766 	if (sata->lba48)
767 		rc = ata_low_level_rw_lba48(dev, blknr, blkcnt, buffer, READ_CMD);
768 	else
769 		rc = ata_low_level_rw_lba28(dev, blknr, blkcnt, buffer, READ_CMD);
770 	return rc;
771 }
772 
773 ulong sata_write(int dev, ulong blknr, lbaint_t blkcnt, const void *buffer)
774 {
775 	u32 rc;
776 	fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
777 
778 	if (sata->lba48) {
779 		rc = ata_low_level_rw_lba48(dev, blknr, blkcnt, buffer, WRITE_CMD);
780 		if (fsl_sata_get_wcache(dev) && fsl_sata_get_flush_ext(dev))
781 			fsl_sata_flush_cache_ext(dev);
782 	} else {
783 		rc = ata_low_level_rw_lba28(dev, blknr, blkcnt, buffer, WRITE_CMD);
784 		if (fsl_sata_get_wcache(dev) && fsl_sata_get_flush(dev))
785 			fsl_sata_flush_cache(dev);
786 	}
787 	return rc;
788 }
789 
790 int scan_sata(int dev)
791 {
792 	fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
793 	unsigned char serial[ATA_ID_SERNO_LEN + 1];
794 	unsigned char firmware[ATA_ID_FW_REV_LEN + 1];
795 	unsigned char product[ATA_ID_PROD_LEN + 1];
796 	u16 *id;
797 	u64 n_sectors;
798 
799 	/* if no detected link */
800 	if (!sata->link)
801 		return -1;
802 
803 	id = (u16 *)malloc(ATA_ID_WORDS * 2);
804 	if (!id) {
805 		printf("id malloc failed\n\r");
806 		return -1;
807 	}
808 
809 	/* Identify device to get information */
810 	fsl_sata_identify(dev, id);
811 
812 	/* Serial number */
813 	ata_id_c_string(id, serial, ATA_ID_SERNO, sizeof(serial));
814 	memcpy(sata_dev_desc[dev].product, serial, sizeof(serial));
815 
816 	/* Firmware version */
817 	ata_id_c_string(id, firmware, ATA_ID_FW_REV, sizeof(firmware));
818 	memcpy(sata_dev_desc[dev].revision, firmware, sizeof(firmware));
819 
820 	/* Product model */
821 	ata_id_c_string(id, product, ATA_ID_PROD, sizeof(product));
822 	memcpy(sata_dev_desc[dev].vendor, product, sizeof(product));
823 
824 	/* Totoal sectors */
825 	n_sectors = ata_id_n_sectors(id);
826 	sata_dev_desc[dev].lba = (u32)n_sectors;
827 
828 #ifdef CONFIG_LBA48
829 	/* Check if support LBA48 */
830 	if (ata_id_has_lba48(id)) {
831 		sata->lba48 = 1;
832 		debug("Device support LBA48\n\r");
833 	} else
834 		debug("Device supports LBA28\n\r");
835 #endif
836 
837 	/* Get the NCQ queue depth from device */
838 	sata->queue_depth = ata_id_queue_depth(id);
839 
840 	/* Get the xfer mode from device */
841 	fsl_sata_xfer_mode(dev, id);
842 
843 	/* Get the write cache status from device */
844 	fsl_sata_init_wcache(dev, id);
845 
846 	/* Set the xfer mode to highest speed */
847 	fsl_sata_set_features(dev);
848 #ifdef DEBUG
849 	fsl_sata_identify(dev, id);
850 	ata_dump_id(id);
851 #endif
852 	free((void *)id);
853 	return 0;
854 }
855