xref: /openbmc/u-boot/drivers/ata/Kconfig (revision 445277b9)
1config AHCI
2	bool "Support SATA controllers with driver model"
3	depends on DM
4	help
5	  This enables a uclass for disk controllers in U-Boot. Various driver
6	  types can use this, such as AHCI/SATA. It does not provide any standard
7	  operations at present. The block device interface has not been converted
8	  to driver model.
9
10config SATA
11	bool "Support SATA controllers"
12	help
13	  This enables support for SATA (Serial Advanced Technology
14	  Attachment), a serial bus standard for connecting to hard drives and
15	  other storage devices.
16
17	  SATA replaces PATA (originally just ATA), which stands for Parallel AT
18	  Attachment, where AT refers to an IBM AT (Advanced Technology)
19	  computer released in 1984.
20
21	  See also CMD_SATA which provides command-line support.
22
23config LIBATA
24	bool
25	help
26	  Select this to build and link the libata helper functions.
27
28config SCSI_AHCI
29	bool "Enable SCSI interface to SATA devices"
30	select LIBATA
31	help
32	  Enable this to allow interfacing SATA devices via the SCSI layer.
33
34menu "SATA/SCSI device support"
35
36config AHCI_PCI
37	bool "Support for PCI-based AHCI controller"
38	depends on DM_SCSI
39	help
40	  Enables support for the PCI-based AHCI controller.
41
42config SATA_CEVA
43	bool "Ceva Sata controller"
44	depends on AHCI
45	depends on DM_SCSI
46	help
47	  This option enables Ceva Sata controller hard IP available on Xilinx
48	  ZynqMP. Support up to 2 external devices. Complient with SATA 3.1 and
49	  AHCI 1.3 specifications with hot-plug detect feature.
50
51
52config DWC_AHCI
53	bool "Enable Synopsys DWC AHCI driver support"
54	select SCSI_AHCI
55	select PHY
56	depends on DM_SCSI
57	help
58	  Enable this driver to support Sata devices through
59	  Synopsys DWC AHCI module.
60
61config DWC_AHSATA
62	bool "Enable DWC AHSATA driver support"
63	select LIBATA
64	help
65	  Enable this driver to support the DWC AHSATA SATA controller found
66	  in i.MX5 and i.MX6 SoCs.
67
68config FSL_SATA
69	bool "Enable Freescale SATA controller driver support"
70	select LIBATA
71	help
72	  Enable this driver to support the SATA controller found in
73	  some Freescale PowerPC SoCs.
74
75config MVSATA_IDE
76	bool "Enable Marvell SATA controller driver support via IDE interface"
77	help
78	  Enable this driver to support the SATA controller found in
79	  some Marvell SoCs, running in IDE compatibility mode using PIO.
80
81config SATA_MV
82	bool "Enable Marvell SATA controller driver support"
83	select LIBATA
84	help
85	  Enable this driver to support the SATA controller found in
86	  some Marvell SoCs.
87
88config SATA_SIL
89	bool "Enable Silicon Image SIL3131 / SIL3132 / SIL3124 SATA driver support"
90	select LIBATA
91	help
92	  Enable this driver to support the SIL3131, SIL3132 and SIL3124
93	  SATA controllers.
94
95config SATA_SIL3114
96	bool "Enable Silicon Image SIL3114 SATA driver support"
97	select LIBATA
98	help
99	  Enable this driver to support the SIL3114 SATA controllers.
100
101endmenu
102