1 /* 2 * Copyright (C) 2015 Samsung Electronics 3 * Przemyslaw Marczak <p.marczak@samsung.com> 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 #include <common.h> 8 #include <errno.h> 9 #include <dm.h> 10 #include <adc.h> 11 #include <asm/arch/adc.h> 12 13 struct exynos_adc_priv { 14 int active_channel; 15 struct exynos_adc_v2 *regs; 16 }; 17 18 int exynos_adc_channel_data(struct udevice *dev, int channel, 19 unsigned int *data) 20 { 21 struct exynos_adc_priv *priv = dev_get_priv(dev); 22 struct exynos_adc_v2 *regs = priv->regs; 23 24 if (channel != priv->active_channel) { 25 error("Requested channel is not active!"); 26 return -EINVAL; 27 } 28 29 if (ADC_V2_GET_STATUS_FLAG(readl(®s->status)) != FLAG_CONV_END) 30 return -EBUSY; 31 32 *data = readl(®s->dat) & ADC_V2_DAT_MASK; 33 34 return 0; 35 } 36 37 int exynos_adc_start_channel(struct udevice *dev, int channel) 38 { 39 struct exynos_adc_priv *priv = dev_get_priv(dev); 40 struct exynos_adc_v2 *regs = priv->regs; 41 unsigned int cfg; 42 43 /* Choose channel */ 44 cfg = readl(®s->con2); 45 cfg &= ~ADC_V2_CON2_CHAN_SEL_MASK; 46 cfg |= ADC_V2_CON2_CHAN_SEL(channel); 47 writel(cfg, ®s->con2); 48 49 /* Start conversion */ 50 cfg = readl(®s->con1); 51 writel(cfg | ADC_V2_CON1_STC_EN, ®s->con1); 52 53 priv->active_channel = channel; 54 55 return 0; 56 } 57 58 int exynos_adc_stop(struct udevice *dev) 59 { 60 struct exynos_adc_priv *priv = dev_get_priv(dev); 61 struct exynos_adc_v2 *regs = priv->regs; 62 unsigned int cfg; 63 64 /* Stop conversion */ 65 cfg = readl(®s->con1); 66 cfg |= ~ADC_V2_CON1_STC_EN; 67 68 writel(cfg, ®s->con1); 69 70 priv->active_channel = -1; 71 72 return 0; 73 } 74 75 int exynos_adc_probe(struct udevice *dev) 76 { 77 struct exynos_adc_priv *priv = dev_get_priv(dev); 78 struct exynos_adc_v2 *regs = priv->regs; 79 unsigned int cfg; 80 81 /* Check HW version */ 82 if (readl(®s->version) != ADC_V2_VERSION) { 83 error("This driver supports only ADC v2!"); 84 return -ENXIO; 85 } 86 87 /* ADC Reset */ 88 writel(ADC_V2_CON1_SOFT_RESET, ®s->con1); 89 90 /* Disable INT - will read status only */ 91 writel(0x0, ®s->int_en); 92 93 /* CON2 - set conversion parameters */ 94 cfg = ADC_V2_CON2_C_TIME(3); /* Conversion times: (1 << 3) = 8 */ 95 cfg |= ADC_V2_CON2_OSEL(OSEL_BINARY); 96 cfg |= ADC_V2_CON2_ESEL(ESEL_ADC_EVAL_TIME_20CLK); 97 cfg |= ADC_V2_CON2_HIGHF(HIGHF_CONV_RATE_600KSPS); 98 writel(cfg, ®s->con2); 99 100 priv->active_channel = -1; 101 102 return 0; 103 } 104 105 int exynos_adc_ofdata_to_platdata(struct udevice *dev) 106 { 107 struct adc_uclass_platdata *uc_pdata = dev_get_uclass_platdata(dev); 108 struct exynos_adc_priv *priv = dev_get_priv(dev); 109 110 priv->regs = (struct exynos_adc_v2 *)devfdt_get_addr(dev); 111 if (priv->regs == (struct exynos_adc_v2 *)FDT_ADDR_T_NONE) { 112 error("Dev: %s - can't get address!", dev->name); 113 return -ENODATA; 114 } 115 116 uc_pdata->data_mask = ADC_V2_DAT_MASK; 117 uc_pdata->data_format = ADC_DATA_FORMAT_BIN; 118 uc_pdata->data_timeout_us = ADC_V2_CONV_TIMEOUT_US; 119 120 /* Mask available channel bits: [0:9] */ 121 uc_pdata->channel_mask = (2 << ADC_V2_MAX_CHANNEL) - 1; 122 123 return 0; 124 } 125 126 static const struct adc_ops exynos_adc_ops = { 127 .start_channel = exynos_adc_start_channel, 128 .channel_data = exynos_adc_channel_data, 129 .stop = exynos_adc_stop, 130 }; 131 132 static const struct udevice_id exynos_adc_ids[] = { 133 { .compatible = "samsung,exynos-adc-v2" }, 134 { } 135 }; 136 137 U_BOOT_DRIVER(exynos_adc) = { 138 .name = "exynos-adc", 139 .id = UCLASS_ADC, 140 .of_match = exynos_adc_ids, 141 .ops = &exynos_adc_ops, 142 .probe = exynos_adc_probe, 143 .ofdata_to_platdata = exynos_adc_ofdata_to_platdata, 144 .priv_auto_alloc_size = sizeof(struct exynos_adc_priv), 145 }; 146