xref: /openbmc/u-boot/drivers/Makefile (revision 704744f8)
1#
2# SPDX-License-Identifier:	GPL-2.0+
3#
4
5obj-$(CONFIG_$(SPL_TPL_)CLK) += clk/
6obj-$(CONFIG_$(SPL_TPL_)DM) += core/
7obj-$(CONFIG_$(SPL_TPL_)DRIVERS_MISC_SUPPORT) += misc/ sysreset/ firmware/
8obj-$(CONFIG_$(SPL_TPL_)I2C_SUPPORT) += i2c/
9obj-$(CONFIG_$(SPL_TPL_)LED) += led/
10obj-$(CONFIG_$(SPL_TPL_)MMC_SUPPORT) += mmc/
11obj-$(CONFIG_$(SPL_TPL_)NAND_SUPPORT) += mtd/nand/
12obj-$(CONFIG_$(SPL_TPL_)PHY) += phy/
13obj-$(CONFIG_$(SPL_TPL_)PINCTRL) += pinctrl/
14obj-$(CONFIG_$(SPL_TPL_)RAM) += ram/
15obj-$(CONFIG_$(SPL_TPL_)SERIAL_SUPPORT) += serial/
16obj-$(CONFIG_$(SPL_TPL_)SPI_FLASH_SUPPORT) += mtd/spi/
17obj-$(CONFIG_$(SPL_TPL_)SPI_SUPPORT) += spi/
18obj-$(CONFIG_$(SPL_TPL_)TIMER) += timer/
19
20ifndef CONFIG_TPL_BUILD
21ifdef CONFIG_SPL_BUILD
22
23obj-$(CONFIG_SPL_CPU_SUPPORT) += cpu/
24obj-$(CONFIG_SPL_CRYPTO_SUPPORT) += crypto/
25obj-$(CONFIG_SPL_GPIO_SUPPORT) += gpio/
26obj-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/
27obj-$(CONFIG_ARMADA_38X) += ddr/marvell/a38x/
28obj-$(CONFIG_ARMADA_XP) += ddr/marvell/axp/
29obj-$(CONFIG_ALTERA_SDRAM) += ddr/altera/
30obj-$(CONFIG_SPL_POWER_SUPPORT) += power/ power/pmic/
31obj-$(CONFIG_SPL_POWER_SUPPORT) += power/regulator/
32obj-$(CONFIG_SPL_RESET_SUPPORT) += reset/
33obj-$(CONFIG_SPL_MTD_SUPPORT) += mtd/
34obj-$(CONFIG_SPL_ONENAND_SUPPORT) += mtd/onenand/
35obj-$(CONFIG_SPL_UBI) += mtd/ubispl/
36obj-$(CONFIG_SPL_DMA_SUPPORT) += dma/
37obj-$(CONFIG_SPL_ETH_SUPPORT) += net/
38obj-$(CONFIG_SPL_ETH_SUPPORT) += net/phy/
39obj-$(CONFIG_SPL_USB_ETHER) += net/phy/
40obj-$(CONFIG_SPL_PCI_SUPPORT) += pci/
41obj-$(CONFIG_SPL_PCH_SUPPORT) += pch/
42obj-$(CONFIG_SPL_RTC_SUPPORT) += rtc/
43obj-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += usb/musb-new/
44obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/
45obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/udc/
46obj-$(CONFIG_SPL_DFU_SUPPORT) += dfu/
47obj-$(CONFIG_SPL_WATCHDOG_SUPPORT) += watchdog/
48obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += usb/host/
49obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
50obj-$(CONFIG_SPL_SATA_SUPPORT) += ata/ scsi/
51obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += block/
52obj-$(CONFIG_SPL_MMC_SUPPORT) += block/
53obj-$(CONFIG_SPL_FPGA_SUPPORT) += fpga/
54obj-$(CONFIG_SPL_THERMAL) += thermal/
55
56endif
57endif
58
59ifdef CONFIG_TPL_BUILD
60
61obj-$(CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/
62
63endif
64
65ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),)
66
67obj-y += adc/
68obj-y += ata/
69obj-$(CONFIG_DM_DEMO) += demo/
70obj-$(CONFIG_BIOSEMU) += bios_emulator/
71obj-y += block/
72obj-$(CONFIG_BOOTCOUNT_LIMIT) += bootcount/
73obj-$(CONFIG_CPU) += cpu/
74obj-y += crypto/
75obj-y += firmware/
76obj-$(CONFIG_FPGA) += fpga/
77obj-y += misc/
78obj-$(CONFIG_MMC) += mmc/
79obj-$(CONFIG_NVME) += nvme/
80obj-y += pcmcia/
81obj-y += dfu/
82obj-$(CONFIG_X86) += pch/
83obj-y += phy/marvell/
84obj-y += rtc/
85obj-y += scsi/
86obj-y += sound/
87obj-y += spmi/
88obj-y += sysreset/
89obj-y += tpm/
90obj-y += video/
91obj-y += watchdog/
92obj-$(CONFIG_QE) += qe/
93obj-$(CONFIG_U_QE) += qe/
94obj-y += mailbox/
95obj-y += memory/
96obj-y += pwm/
97obj-y += reset/
98obj-y += input/
99# SOC specific infrastructure drivers.
100obj-y += soc/
101obj-$(CONFIG_REMOTEPROC) += remoteproc/
102obj-y += thermal/
103
104obj-$(CONFIG_MACH_PIC32) += ddr/microchip/
105endif
106