xref: /openbmc/u-boot/doc/uImage.FIT/multi_spl.its (revision 193f6fb9) 
1/dts-v1/;
2
3/*
4 * (Bogus) example FIT image description file demonstrating the usage
5 * of multiple images loaded by the SPL.
6 * Several binaries will be loaded at their respective load addresses.
7 *
8 * For booting U-Boot, "firmware" is searched first. If not found, "loadables"
9 * is used to identify images to be loaded into memory. If falcon boot is
10 * enabled, "kernel" is searched first. If not found, it falls back to the
11 * same flow as booting U-Boot. Changing image type will result skipping
12 * specific image.
13 *
14 * Finally the one image specifying an entry point will be entered by the SPL.
15 */
16
17/ {
18	description = "multiple firmware blobs and U-Boot, loaded by SPL";
19	#address-cells = <0x1>;
20
21	images {
22
23		uboot {
24			description = "U-Boot (64-bit)";
25			type = "standalone";
26			arch = "arm64";
27			compression = "none";
28			load = <0x4a000000>;
29		};
30
31		atf {
32			description = "ARM Trusted Firmware";
33			type = "firmware";
34			arch = "arm64";
35			compression = "none";
36			load = <0x18000>;
37			entry = <0x18000>;
38		};
39
40		mgmt-firmware {
41			description = "arisc management processor firmware";
42			type = "firmware";
43			arch = "or1k";
44			compression = "none";
45			load = <0x40000>;
46		};
47
48		fdt@1 {
49			description = "Pine64+ DT";
50			type = "flat_dt";
51			compression = "none";
52			load = <0x4fa00000>;
53			arch = "arm64";
54		};
55
56		fdt@2 {
57			description = "Pine64 DT";
58			type = "flat_dt";
59			compression = "none";
60			load = <0x4fa00000>;
61			arch = "arm64";
62		};
63
64		kernel {
65			description = "4.7-rc5 kernel";
66			type = "kernel";
67			compression = "none";
68			load = <0x40080000>;
69			arch = "arm64";
70		};
71
72		initrd {
73			description = "Debian installer initrd";
74			type = "ramdisk";
75			compression = "none";
76			load = <0x4fe00000>;
77			arch = "arm64";
78		};
79	};
80
81	configurations {
82		default = "config@1";
83
84		config@1 {
85			description = "sun50i-a64-pine64-plus";
86			loadables = "uboot", "atf", "kernel", "initrd";
87			fdt = "fdt@1";
88		};
89
90		config@2 {
91			description = "sun50i-a64-pine64";
92			loadables = "uboot", "atf", "mgmt-firmware";
93			fdt = "fdt@2";
94		};
95	};
96};
97