1ps8622-bridge bindings
2
3Required properties:
4	- compatible: "parade,ps8622" or "parade,ps8625"
5	- reg: first i2c address of the bridge
6	- sleep-gpios: OF device-tree gpio specification for PD_ pin.
7	- reset-gpios: OF device-tree gpio specification for RST_ pin.
8	- parade,regs: List of 3-byte registers tuples to write:
9		<I2C chip address offset> <register> <value>
10
11Optional properties:
12	- lane-count: number of DP lanes to use
13	- use-external-pwm: backlight will be controlled by an external PWM
14	- video interfaces: Device node can contain video interface port
15			    nodes for panel according to [1].
16
17[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
18
19Example:
20	lvds-bridge@48 {
21		compatible = "parade,ps8622";
22		reg = <0x48>;
23		sleep-gpios = <&gpc3 6 1 0 0>;
24		reset-gpios = <&gpc3 1 1 0 0>;
25		lane-count = <1>;
26		ports {
27			port@0 {
28				bridge_out: endpoint {
29					remote-endpoint = <&panel_in>;
30				};
31			};
32		};
33	};
34