1Fixed Voltage regulator
2
3Binding:
4The binding is done by the property "compatible" - this is different, than for
5binding by the node prefix (doc/device-tree-bindings/regulator/regulator.txt).
6
7Required properties:
8- compatible: "regulator-fixed"
9- regulator-name: this is required by the regulator uclass
10
11Optional properties:
12- gpio: GPIO to use for enable control
13- startup-delay-us: startup time in microseconds
14- regulator constraints (binding info: regulator.txt)
15
16Other kernel-style properties, are currently not used.
17
18Note:
19For the regulator constraints, driver expects that:
20- regulator-min-microvolt is equal to regulator-max-microvolt
21- regulator-min-microamp is equal to regulator-max-microamp
22
23Example:
24fixed_regulator@0 {
25	/* Mandatory */
26	compatible = "regulator-fixed";
27	regulator-name = "LED_3.3V";
28
29	/* Optional: */
30	gpio = <&gpc1 0 GPIO_ACTIVE_LOW>;
31
32	/* Optional for regulator uclass */
33	regulator-min-microvolt = <3300000>;
34	regulator-max-microvolt = <3300000>;
35	regulator-min-microamp = <15000>;
36	regulator-max-microamp = <15000>;
37	regulator-always-on;
38	regulator-boot-on;
39};
40