1*c2f74c8fSMateusz KulikowskiQualcomm pm8916 PMIC 2*c2f74c8fSMateusz Kulikowski 3*c2f74c8fSMateusz KulikowskiThis PMIC is connected using SPMI bus so should be child of SPMI bus controller. 4*c2f74c8fSMateusz Kulikowski 5*c2f74c8fSMateusz KulikowskiRequired properties: 6*c2f74c8fSMateusz Kulikowski- compatible: "qcom,spmi-pmic"; 7*c2f74c8fSMateusz Kulikowski- reg: SPMI Slave ID, size (ignored) 8*c2f74c8fSMateusz Kulikowski- #address-cells: 0x1 (peripheral ID) 9*c2f74c8fSMateusz Kulikowski- #size-cells: 0x1 (size of peripheral register space) 10*c2f74c8fSMateusz Kulikowski 11*c2f74c8fSMateusz KulikowskiExample: 12*c2f74c8fSMateusz Kulikowski 13*c2f74c8fSMateusz Kulikowskipm8916@0 { 14*c2f74c8fSMateusz Kulikowski compatible = "qcom,spmi-pmic"; 15*c2f74c8fSMateusz Kulikowski reg = <0x0 0x1>; 16*c2f74c8fSMateusz Kulikowski #address-cells = <0x1>; 17*c2f74c8fSMateusz Kulikowski #size-cells = <0x1>; 18*c2f74c8fSMateusz Kulikowski}; 19