1* Exynos 5250 DWC_mobile_storage
2
3The Exynos 5250 provides DWC_mobile_storage interface which supports
4. Embedded Multimedia Cards (EMMC-version 4.5)
5. Secure Digital memory (SD mem-version 2.0)
6. Secure Digital I/O (SDIO-version 3.0)
7. Consumer Electronics Advanced Transport Architecture (CE-ATA-version 1.1)
8
9The Exynos 5250 DWC_mobile_storage provides four channels.
10SOC specific and Board specific properties are channel specific.
11
12Required SoC Specific Properties:
13
14- compatible: should be
15	- samsung,exynos5250-dwmmc: for exynos5250 platforms
16
17- reg: physical base address of the controller and length of memory mapped
18	region.
19
20- interrupts: The interrupt number to the cpu.
21
22Required Board Specific Properties:
23
24- #address-cells: should be 1.
25- #size-cells: should be 0.
26- samsung,bus-width: The width of the bus used to interface the devices
27	supported by DWC_mobile_storage (SD-MMC/EMMC/SDIO).
28	. Typically the bus width is 4 or 8.
29- samsung,timing: The timing values to be written into the
30	Drv/sample clock selection register of corresponding channel.
31	. It is comprised of 3 values corresponding to the 3 fileds
32	  'SelClk_sample', 'SelClk_drv' and 'DIVRATIO' of CLKSEL register.
33	. SelClk_sample: Select sample clock among 8 shifted clocks.
34	. SelClk_drv: Select drv clock among 8 shifted clocks.
35	. DIVRATIO: Clock Divide ratio select.
36	. The above 3 values are used by the clock phase shifter.
37
38Example:
39
40mmc@12200000 {
41	samsung,bus-width = <8>;
42	samsung,timing = <1 3 3>;
43	samsung,removable = <1>;
44}
45In the above example,
46	. The bus width is 8
47	. Timing is comprised of 3 values as explained below
48		1 - SelClk_sample
49		3 - SelClk_drv
50		3 - DIVRATIO
51	. The 'removable' flag indicates whether the the particilar device
52	  cannot be removed (always present) or it is a removable device.
53		1 - Indicates that the device is removable.
54		0 - Indicates that the device cannot be removed.
55