1The /config node (Configuration Options)
2----------------------------------------
3
4A number of run-time configuration options are provided in the /config node
5of the control device tree. You can access these using fdtdec_get_config_int(),
6fdtdec_get_config_bool() and fdtdec_get_config_string().
7
8Available options are:
9
10silent-console
11	If present and non-zero, the console is silenced by default on boot.
12
13no-keyboard
14	Tells U-Boot not to expect an attached keyboard with a VGA console
15
16u-boot,efi-partition-entries-offset
17	If present, this provides an offset (in bytes, from the start of a
18	device) that should be skipped over before the partition entries.
19	This is used by the EFI/GPT partition implementation when a device
20	is formatted.
21
22	This setting will override any values configured via Kconfig.
23
24u-boot,spl-payload-offset
25	If present (and SPL is controlled by the device-tree), this allows
26	to override the CONFIG_SYS_SPI_U_BOOT_OFFS setting using a value
27	from the device-tree.
28