xref: /openbmc/u-boot/doc/README.t1040-l2switch (revision 6706b115a632ac46ff13fd457c7b8a507b922d50)
1*6706b115SCodrin CiubotariuThis file contains information for VSC9953, a Vitesse L2 Switch IP
2*6706b115SCodrin Ciubotariuwhich is integrated in the T1040/T1020 Freescale SoCs.
3*6706b115SCodrin Ciubotariu
4*6706b115SCodrin CiubotariuAbout Device:
5*6706b115SCodrin Ciubotariu=============
6*6706b115SCodrin CiubotariuVSC9953 is an 8-port Gigabit Ethernet switch supports the following features:
7*6706b115SCodrin Ciubotariu	-	8192 MAC addresses
8*6706b115SCodrin Ciubotariu	-	Static Address provisioning
9*6706b115SCodrin Ciubotariu	-	Dynamic learning of MAC addresses and aging
10*6706b115SCodrin Ciubotariu	-	4096 VLANs
11*6706b115SCodrin Ciubotariu	-	Independent and shared VLAN learning (IVL, SVL)
12*6706b115SCodrin Ciubotariu	-	Policing with storm control and MC/BC protection
13*6706b115SCodrin Ciubotariu	-	IPv4 and IPv6 multicast
14*6706b115SCodrin Ciubotariu	-	Jumbo frames (9.6 KB)
15*6706b115SCodrin Ciubotariu	-	Access Control List
16*6706b115SCodrin Ciubotariu	-	VLAN editing, translation and remarking
17*6706b115SCodrin Ciubotariu	-	RMON counters per port
18*6706b115SCodrin Ciubotariu
19*6706b115SCodrin CiubotariuSwitch interfaces:
20*6706b115SCodrin Ciubotariu	-	8 Gigabit switch ports (ports 0 to 7) are external and are connected to external PHYs
21*6706b115SCodrin Ciubotariu	-	2 switch ports (ports 8 and 9) of 2.5 G are connected (fixed links)
22*6706b115SCodrin Ciubotariu		to FMan ports (FM1@DTSEC1 and FM1@DTSEC2)
23*6706b115SCodrin Ciubotariu
24*6706b115SCodrin CiubotariuCommands Overview:
25*6706b115SCodrin Ciubotariu=============
26*6706b115SCodrin CiubotariuCommands supported
27*6706b115SCodrin Ciubotariu	- enable/disable a port
28*6706b115SCodrin Ciubotariu	- check a port's link speed, duplexity and status.
29*6706b115SCodrin Ciubotariu
30*6706b115SCodrin CiubotariuCommands syntax
31*6706b115SCodrin Ciubotariu	ethsw port <port_nr> enable|disable		- enable/disable an l2 switch port
32*6706b115SCodrin Ciubotariu	ethsw port <port_nr> show			- show an l2 switch port's configuration
33*6706b115SCodrin Ciubotariu
34*6706b115SCodrin Ciubotariu	port_nr=0..9; use "all" for all ports
35*6706b115SCodrin Ciubotariu
36*6706b115SCodrin Ciubotariu=> ethsw port all show
37*6706b115SCodrin Ciubotariu    Port   Status     Link    Speed   Duplex
38*6706b115SCodrin Ciubotariu       0  enabled     down       10     half
39*6706b115SCodrin Ciubotariu       1  enabled     down       10     half
40*6706b115SCodrin Ciubotariu       2  enabled     down       10     half
41*6706b115SCodrin Ciubotariu       3  enabled       up     1000     full
42*6706b115SCodrin Ciubotariu       4 disabled     down        -     half
43*6706b115SCodrin Ciubotariu       5 disabled     down        -     half
44*6706b115SCodrin Ciubotariu       6 disabled     down        -     half
45*6706b115SCodrin Ciubotariu       7 disabled     down        -     half
46*6706b115SCodrin Ciubotariu       8  enabled       up     2500     full
47*6706b115SCodrin Ciubotariu       9  enabled       up     2500     full
48*6706b115SCodrin Ciubotariu=>
49