1MIPS Malta board 2 3How to flash using a MIPS Navigator Probe: 4 5 - Ensure that your Malta has jumper JP1 fitted. Without this jumper you will 6 be unable to flash your Malta using a Navigator Probe. 7 8 - Connect Navigator Console to your probe and Malta as usual. 9 10 - Within Navigator Console run the following commands: 11 12 source /path/to/u-boot/board/malta/flash-malta-boot.tcl 13 reset 14 flash-boot /path/to/u-boot/u-boot.bin 15 16 - You should now be able to reboot your Malta to a U-boot shell. 17