xref: /openbmc/u-boot/doc/README.fsl-ddr (revision 076bff8f4746baf7c83b96049d97e9dd4454dace) 
1
2Table of interleaving modes supported in cpu/8xxx/ddr/
3======================================================
4  +-------------+---------------------------------------------------------+
5  |             |                   Rank Interleaving                     |
6  |             +--------+-----------+-----------+------------+-----------+
7  |Memory       |        |           |           |    2x2     |    4x1    |
8  |Controller   |  None  | 2x1 lower | 2x1 upper | {CS0+CS1}, | {CS0+CS1+ |
9  |Interleaving |        | {CS0+CS1} | {CS2+CS3} | {CS2+CS3}  |  CS2+CS3} |
10  +-------------+--------+-----------+-----------+------------+-----------+
11  |None         |  Yes   | Yes       | Yes       | Yes        | Yes       |
12  +-------------+--------+-----------+-----------+------------+-----------+
13  |Cacheline    |  Yes   | Yes       | No        | No, Only(*)| Yes       |
14  |             |CS0 Only|           |           | {CS0+CS1}  |           |
15  +-------------+--------+-----------+-----------+------------+-----------+
16  |Page         |  Yes   | Yes       | No        | No, Only(*)| Yes       |
17  |             |CS0 Only|           |           | {CS0+CS1}  |           |
18  +-------------+--------+-----------+-----------+------------+-----------+
19  |Bank         |  Yes   | Yes       | No        | No, Only(*)| Yes       |
20  |             |CS0 Only|           |           | {CS0+CS1}  |           |
21  +-------------+--------+-----------+-----------+------------+-----------+
22  |Superbank    |  No    | Yes       | No        | No, Only(*)| Yes       |
23  |             |        |           |           | {CS0+CS1}  |           |
24  +-------------+--------+-----------+-----------+------------+-----------+
25 (*) Although the hardware can be configured with memory controller
26 interleaving using "2x2" rank interleaving, it only interleaves {CS0+CS1}
27 from each controller. {CS2+CS3} on each controller are only rank
28 interleaved on that controller.
29
30 For memory controller interleaving, identical DIMMs are suggested. Software
31 doesn't check the size or organization of interleaved DIMMs.
32
33The ways to configure the ddr interleaving mode
34==============================================
351. In board header file(e.g.MPC8572DS.h), add default interleaving setting
36   under "CONFIG_EXTRA_ENV_SETTINGS", like:
37	#define CONFIG_EXTRA_ENV_SETTINGS				\
38	 "hwconfig=fsl_ddr:ctlr_intlv=bank"			\
39	 ......
40
412. Run u-boot "setenv" command to configure the memory interleaving mode.
42   Either numerical or string value is accepted.
43
44  # disable memory controller interleaving
45  setenv hwconfig "fsl_ddr:ctlr_intlv=null"
46
47  # cacheline interleaving
48  setenv hwconfig "fsl_ddr:ctlr_intlv=cacheline"
49
50  # page interleaving
51  setenv hwconfig "fsl_ddr:ctlr_intlv=page"
52
53  # bank interleaving
54  setenv hwconfig "fsl_ddr:ctlr_intlv=bank"
55
56  # superbank
57  setenv hwconfig "fsl_ddr:ctlr_intlv=superbank"
58
59  # disable bank (chip-select) interleaving
60  setenv hwconfig "fsl_ddr:bank_intlv=null"
61
62  # bank(chip-select) interleaving cs0+cs1
63  setenv hwconfig "fsl_ddr:bank_intlv=cs0_cs1"
64
65  # bank(chip-select) interleaving cs2+cs3
66  setenv hwconfig "fsl_ddr:bank_intlv=cs2_cs3"
67
68  # bank(chip-select) interleaving (cs0+cs1) and (cs2+cs3)  (2x2)
69  setenv hwconfig "fsl_ddr:bank_intlv=cs0_cs1_and_cs2_cs3"
70
71  # bank(chip-select) interleaving (cs0+cs1+cs2+cs3) (4x1)
72  setenv hwconfig "fsl_ddr:bank_intlv=cs0_cs1_cs2_cs3"
73
74  The above memory controller interleaving and bank interleaving can be mixed. The syntax is
75  setenv hwconfig "fsl_ddr:ctlr_intlv=cacheline,bank_intlv=cs0_cs1"
76