1Atmel AT91 Evaluation kits 2 3http://atmel.com/dyn/products/tools.asp?family_id=605#1443 4 5I. Board mapping & boot media 6------------------------------------------------------------------------------ 7AT91SAM9260EK, AT91SAM9G20EK & AT91SAM9XEEK 8------------------------------------------------------------------------------ 9 10Memory map 11 0x20000000 - 23FFFFFF SDRAM (64 MB) 12 0xC0000000 - Cxxxxxxx Atmel Dataflash card (J13) 13 0xD0000000 - Dxxxxxxx Soldered Atmel Dataflash 14 15Environment variables 16 17 U-Boot environment variables can be stored at different places: 18 - Dataflash on SPI chip select 1 (default) 19 - Dataflash on SPI chip select 0 (dataflash card) 20 - Nand flash. 21 22 You can choose your storage location at config step (here for at91sam9260ek) : 23 make at91sam9260ek_config - use data flash (spi cs1) (default) 24 make at91sam9260ek_nandflash_config - use nand flash 25 make at91sam9260ek_dataflash_cs0_config - use data flash (spi cs0) 26 make at91sam9260ek_dataflash_cs1_config - use data flash (spi cs1) 27 28 29------------------------------------------------------------------------------ 30AT91SAM9261EK, AT91SAM9G10EK 31------------------------------------------------------------------------------ 32 33Memory map 34 0x20000000 - 23FFFFFF SDRAM (64 MB) 35 0xC0000000 - Cxxxxxxx Soldered Atmel Dataflash 36 0xD0000000 - Dxxxxxxx Atmel Dataflash card (J22) 37 38Environment variables 39 40 U-Boot environment variables can be stored at different places: 41 - Dataflash on SPI chip select 0 (default) 42 - Dataflash on SPI chip select 3 (dataflash card) 43 - Nand flash. 44 45 You can choose your storage location at config step (here for at91sam9260ek) : 46 make at91sam9261ek_config - use data flash (spi cs0) (default) 47 make at91sam9261ek_nandflash_config - use nand flash 48 make at91sam9261ek_dataflash_cs0_config - use data flash (spi cs0) 49 make at91sam9261ek_dataflash_cs3_config - use data flash (spi cs3) 50 51 52------------------------------------------------------------------------------ 53AT91SAM9263EK 54------------------------------------------------------------------------------ 55 56Memory map 57 0x20000000 - 23FFFFFF SDRAM (64 MB) 58 0xC0000000 - Cxxxxxxx Atmel Dataflash card (J9) 59 60Environment variables 61 62 U-Boot environment variables can be stored at different places: 63 - Dataflash on SPI chip select 0 (dataflash card) 64 - Nand flash. 65 - Nor falsh (not populate by default) 66 67 You can choose your storage location at config step (here for at91sam9260ek) : 68 make at91sam9263ek_config - use data flash (spi cs0) (default) 69 make at91sam9263ek_nandflash_config - use nand flash 70 make at91sam9263ek_dataflash_cs0_config - use data flash (spi cs0) 71 make at91sam9263ek_norflash_config - use nor falsh 72 73 You can choose to boot directly from U-Boot at config step 74 make at91sam9263ek_norflash_boot_config - boot from nor falsh 75 76 77------------------------------------------------------------------------------ 78AT91SAM9M10G45EK 79------------------------------------------------------------------------------ 80 81Memory map 82 0x20000000 - 23FFFFFF SDRAM (64 MB) 83 0xC0000000 - Cxxxxxxx Atmel Dataflash card (J12) 84 85Environment variables 86 87 U-Boot environment variables can be stored at different places: 88 - Dataflash on SPI chip select 0 (dataflash card) 89 - Nand flash. 90 91 You can choose your storage location at config step (here for at91sam9m10g45ek) : 92 make at91sam9m10g45ek_config - use data flash (spi cs0) (default) 93 make at91sam9m10g45ek_nandflash_config - use nand flash 94 make at91sam9m10g45ek_dataflash_cs0_config - use data flash (spi cs0) 95 96 97------------------------------------------------------------------------------ 98AT91SAM9RLEK 99------------------------------------------------------------------------------ 100 101Memory map 102 0x20000000 - 23FFFFFF SDRAM (64 MB) 103 0xC0000000 - Cxxxxxxx Soldered Atmel Dataflash 104 105Environment variables 106 107 U-Boot environment variables can be stored at different places: 108 - Dataflash on SPI chip select 0 109 - Nand flash. 110 111 You can choose your storage location at config step (here for at91sam9260ek) : 112 make at91sam9263ek_config - use data flash (spi cs0) (default) 113 make at91sam9263ek_nandflash_config - use nand flash 114 make at91sam9263ek_dataflash_cs0_config - use data flash (spi cs0) 115 116II. Watchdog support 117 118 For security reasons, the at91 watchdog is running at boot time and, 119 if deactivated, cannot be used anymore. 120 If you want to use the watchdog, you will need to keep it running in 121 your code (make sure not to disable it in AT91Bootstrap for instance). 122 123 In the U-Boot configuration, the AT91 watchdog support is enabled using 124 the CONFIG_AT91SAM9_WATCHDOG and CONFIG_HW_WATCHDOG options. 125