xref: /openbmc/u-boot/disk/part_iso.c (revision 21845825)
1 /*
2  * (C) Copyright 2001
3  * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch.
4  *
5  * SPDX-License-Identifier:	GPL-2.0+
6  */
7 
8 #include <common.h>
9 #include <command.h>
10 #include "part_iso.h"
11 
12 #ifdef HAVE_BLOCK_DEVICE
13 
14 /* #define	ISO_PART_DEBUG */
15 
16 #ifdef	ISO_PART_DEBUG
17 #define	PRINTF(fmt,args...)	printf (fmt ,##args)
18 #else
19 #define PRINTF(fmt,args...)
20 #endif
21 
22 /* enable this if CDs are written with the PowerPC Platform ID */
23 #undef CHECK_FOR_POWERPC_PLATTFORM
24 #define CD_SECTSIZE 2048
25 
26 static unsigned char tmpbuf[CD_SECTSIZE];
27 
28 /* Convert char[4] in little endian format to the host format integer
29  */
30 static inline unsigned long le32_to_int(unsigned char *le32)
31 {
32     return ((le32[3] << 24) +
33 	    (le32[2] << 16) +
34 	    (le32[1] << 8) +
35 	     le32[0]
36 	   );
37 }
38 /* Convert char[2] in little endian format to the host format integer
39  */
40 static inline unsigned short le16_to_int(unsigned char *le16)
41 {
42     return ((le16[1] << 8) +
43 	   le16[0]
44 	   );
45 }
46 
47 
48 /* only boot records will be listed as valid partitions */
49 int part_get_info_iso_verb(struct blk_desc *dev_desc, int part_num,
50 			   disk_partition_t *info, int verb)
51 {
52 	int i,offset,entry_num;
53 	unsigned short *chksumbuf;
54 	unsigned short chksum;
55 	unsigned long newblkaddr,blkaddr,lastsect,bootaddr;
56 	iso_boot_rec_t *pbr = (iso_boot_rec_t	*)tmpbuf; /* boot record */
57 	iso_pri_rec_t *ppr = (iso_pri_rec_t	*)tmpbuf;	/* primary desc */
58 	iso_val_entry_t *pve = (iso_val_entry_t *)tmpbuf;
59 	iso_init_def_entry_t *pide;
60 
61 	if (dev_desc->blksz != CD_SECTSIZE)
62 		return -1;
63 
64 	/* the first sector (sector 0x10) must be a primary volume desc */
65 	blkaddr=PVD_OFFSET;
66 	if (blk_dread(dev_desc, PVD_OFFSET, 1, (ulong *)tmpbuf) != 1)
67 		return -1;
68 	if(ppr->desctype!=0x01) {
69 		if(verb)
70 			printf ("** First descriptor is NOT a primary desc on %d:%d **\n",
71 				dev_desc->devnum, part_num);
72 		return (-1);
73 	}
74 	if(strncmp((char *)ppr->stand_ident,"CD001",5)!=0) {
75 		if(verb)
76 			printf ("** Wrong ISO Ident: %s on %d:%d **\n",
77 				ppr->stand_ident, dev_desc->devnum, part_num);
78 		return (-1);
79 	}
80 	lastsect= ((ppr->firstsek_LEpathtab1_LE & 0x000000ff)<<24) +
81 		  ((ppr->firstsek_LEpathtab1_LE & 0x0000ff00)<< 8) +
82 		  ((ppr->firstsek_LEpathtab1_LE & 0x00ff0000)>> 8) +
83 		  ((ppr->firstsek_LEpathtab1_LE & 0xff000000)>>24) ;
84 	info->blksz=ppr->secsize_BE; /* assuming same block size for all entries */
85 	PRINTF(" Lastsect:%08lx\n",lastsect);
86 	for(i=blkaddr;i<lastsect;i++) {
87 		PRINTF("Reading block %d\n", i);
88 		if (blk_dread(dev_desc, i, 1, (ulong *)tmpbuf) != 1)
89 			return -1;
90 		if(ppr->desctype==0x00)
91 			break; /* boot entry found */
92 		if(ppr->desctype==0xff) {
93 			if(verb)
94 				printf ("** No valid boot catalog found on %d:%d **\n",
95 					dev_desc->devnum, part_num);
96 			return (-1);
97 		}
98 	}
99 	/* boot entry found */
100 	if(strncmp(pbr->ident_str,"EL TORITO SPECIFICATION",23)!=0) {
101 		if(verb)
102 			printf ("** Wrong El Torito ident: %s on %d:%d **\n",
103 				pbr->ident_str, dev_desc->devnum, part_num);
104 		return (-1);
105 	}
106 	bootaddr=le32_to_int(pbr->pointer);
107 	PRINTF(" Boot Entry at: %08lX\n",bootaddr);
108 	if (blk_dread(dev_desc, bootaddr, 1, (ulong *)tmpbuf) != 1) {
109 		if(verb)
110 			printf ("** Can't read Boot Entry at %lX on %d:%d **\n",
111 				bootaddr, dev_desc->devnum, part_num);
112 		return (-1);
113 	}
114 	chksum=0;
115 	chksumbuf = (unsigned short *)tmpbuf;
116 	for(i=0;i<0x10;i++)
117 		chksum+=((chksumbuf[i] &0xff)<<8)+((chksumbuf[i] &0xff00)>>8);
118 	if(chksum!=0) {
119 		if(verb)
120 			printf("** Checksum Error in booting catalog validation entry on %d:%d **\n",
121 			       dev_desc->devnum, part_num);
122 		return (-1);
123 	}
124 	if((pve->key[0]!=0x55)||(pve->key[1]!=0xAA)) {
125 		if(verb)
126 			printf ("** Key 0x55 0xAA error on %d:%d **\n",
127 				dev_desc->devnum, part_num);
128 		return(-1);
129 	}
130 #ifdef CHECK_FOR_POWERPC_PLATTFORM
131 	if(pve->platform!=0x01) {
132 		if(verb)
133 			printf ("** No PowerPC platform CD on %d:%d **\n",
134 				dev_desc->devnum, part_num);
135 		return(-1);
136 	}
137 #endif
138 	/* the validation entry seems to be ok, now search the "partition" */
139 	entry_num=0;
140 	offset=0x20;
141 	strcpy((char *)info->type, "U-Boot");
142 	switch(dev_desc->if_type) {
143 		case IF_TYPE_IDE:
144 		case IF_TYPE_SATA:
145 		case IF_TYPE_ATAPI:
146 			sprintf ((char *)info->name, "hd%c%d",
147 				'a' + dev_desc->devnum, part_num);
148 			break;
149 		case IF_TYPE_SCSI:
150 			sprintf ((char *)info->name, "sd%c%d",
151 				'a' + dev_desc->devnum, part_num);
152 			break;
153 		case IF_TYPE_USB:
154 			sprintf ((char *)info->name, "usbd%c%d",
155 				'a' + dev_desc->devnum, part_num);
156 			break;
157 		case IF_TYPE_DOC:
158 			sprintf ((char *)info->name, "docd%c%d",
159 				'a' + dev_desc->devnum, part_num);
160 			break;
161 		default:
162 			sprintf ((char *)info->name, "xx%c%d",
163 				'a' + dev_desc->devnum, part_num);
164 			break;
165 	}
166 	/* the bootcatalog (including validation Entry) is limited to 2048Bytes
167 	 * (63 boot entries + validation entry) */
168 	 while(offset<2048) {
169 		pide=(iso_init_def_entry_t *)&tmpbuf[offset];
170 		if ((pide->boot_ind==0x88) ||
171 		    (pide->boot_ind==0x00)) { /* Header Id for default Sections Entries */
172 			if(entry_num==part_num) { /* part found */
173 				goto found;
174 			}
175 			entry_num++; /* count partitions Entries (boot and non bootables */
176 			offset+=0x20;
177 			continue;
178 		}
179 		if ((pide->boot_ind==0x90) ||	/* Section Header Entry */
180 		    (pide->boot_ind==0x91) ||	/* Section Header Entry (last) */
181 		    (pide->boot_ind==0x44)) {	/* Extension Indicator */
182 			offset+=0x20; /* skip unused entries */
183 		}
184 		else {
185 			if(verb)
186 				printf ("** Partition %d not found on device %d **\n",
187 					part_num, dev_desc->devnum);
188 			return(-1);
189 		}
190 	}
191 	/* if we reach this point entire sector has been
192 	 * searched w/o succsess */
193 	if(verb)
194 		printf ("** Partition %d not found on device %d **\n",
195 			part_num, dev_desc->devnum);
196 	return(-1);
197 found:
198 	if(pide->boot_ind!=0x88) {
199 		if(verb)
200 			printf("** Partition %d is not bootable on device %d **\n",
201 			       part_num, dev_desc->devnum);
202 		return (-1);
203 	}
204 	switch(pide->boot_media) {
205 		case 0x00: /* no emulation */
206 			info->size=le16_to_int(pide->sec_cnt)>>2;
207 			break;
208 		case 0x01:	info->size=2400>>2; break; /* 1.2MByte Floppy */
209 		case 0x02:	info->size=2880>>2; break; /* 1.44MByte Floppy */
210 		case 0x03:	info->size=5760>>2; break; /* 2.88MByte Floppy */
211 		case 0x04:	info->size=2880>>2; break; /* dummy (HD Emulation) */
212 		default:	info->size=0; break;
213 	}
214 	newblkaddr=le32_to_int(pide->rel_block_addr);
215 	info->start=newblkaddr;
216 	PRINTF(" part %d found @ %lx size %lx\n",part_num,newblkaddr,info->size);
217 	return 0;
218 }
219 
220 static int part_get_info_iso(struct blk_desc *dev_desc, int part_num,
221 				  disk_partition_t *info)
222 {
223 	return part_get_info_iso_verb(dev_desc, part_num, info, 1);
224 }
225 
226 static void part_print_iso(struct blk_desc *dev_desc)
227 {
228 	disk_partition_t info;
229 	int i;
230 
231 	if (part_get_info_iso_verb(dev_desc, 0, &info, 0) == -1) {
232 		printf("** No boot partition found on device %d **\n",
233 		       dev_desc->devnum);
234 		return;
235 	}
236 	printf("Part   Start     Sect x Size Type\n");
237 	i=0;
238 	do {
239 		printf(" %2d " LBAFU " " LBAFU " %6ld %.32s\n",
240 		       i, info.start, info.size, info.blksz, info.type);
241 		i++;
242 	} while (part_get_info_iso_verb(dev_desc, i, &info, 0) != -1);
243 }
244 
245 static int part_test_iso(struct blk_desc *dev_desc)
246 {
247 	disk_partition_t info;
248 
249 	return part_get_info_iso_verb(dev_desc, 0, &info, 0);
250 }
251 
252 U_BOOT_PART_TYPE(iso) = {
253 	.name		= "ISO",
254 	.part_type	= PART_TYPE_ISO,
255 	.get_info	= part_get_info_iso,
256 	.print		= part_print_iso,
257 	.test		= part_test_iso,
258 };
259 #endif
260