xref: /openbmc/u-boot/configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig (revision aae7422b)

CONFIG_ARM=y
CONFIG_ARCH_ZYNQMP=y
CONFIG_SYS_TEXT_BASE=0x8000000
CONFIG_SYS_MALLOC_F_LEN=0x8000
CONFIG_IDENT_STRING=" Xilinx ZynqMP ZC1751 xm018 dc4"
CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zc1751-xm018-dc4"
CONFIG_DEBUG_UART=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SPL=y
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_RAM_SUPPORT=y
CONFIG_SPL_RAM_DEVICE=y
CONFIG_SYS_PROMPT="ZynqMP> "
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_CLK=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_FPGA_LOADBP=y
CONFIG_CMD_FPGA_LOADP=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_TIME=y
CONFIG_CMD_TIMER=y
CONFIG_CMD_EXT4_WRITE=y
# CONFIG_SPL_ISO_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_EMBED=y
CONFIG_ENV_IS_IN_FAT=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_FPGA_XILINX=y
CONFIG_FPGA_ZYNQMPPL=y
CONFIG_DM_GPIO=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_CADENCE=y
CONFIG_MISC=y
CONFIG_DM_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ZYNQ=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_BAR=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
CONFIG_PHY_MARVELL=y
CONFIG_PHY_NATSEMI=y
CONFIG_PHY_REALTEK=y
CONFIG_PHY_TI=y
CONFIG_PHY_VITESSE=y
CONFIG_DM_ETH=y
CONFIG_PHY_GIGE=y
CONFIG_ZYNQ_GEM=y
CONFIG_DEBUG_UART_ZYNQ=y
CONFIG_DEBUG_UART_BASE=0xff000000
CONFIG_DEBUG_UART_CLOCK=100000000
CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_ZYNQ_SERIAL=y