xref: /openbmc/u-boot/configs/thuban_defconfig (revision 5cc9e6b7)
1CONFIG_ARM=y
2CONFIG_ARCH_OMAP2PLUS=y
3CONFIG_SYS_TEXT_BASE=0x80100000
4CONFIG_SPL_GPIO_SUPPORT=y
5CONFIG_SPL_LIBCOMMON_SUPPORT=y
6CONFIG_SPL_LIBGENERIC_SUPPORT=y
7CONFIG_SYS_MALLOC_F_LEN=0x2000
8CONFIG_AM33XX=y
9CONFIG_SYS_MPUCLK=300
10CONFIG_TARGET_THUBAN=y
11CONFIG_SPL_MMC_SUPPORT=y
12CONFIG_SPL_SERIAL_SUPPORT=y
13CONFIG_SPL_LIBDISK_SUPPORT=y
14CONFIG_SPL_NAND_SUPPORT=y
15CONFIG_SPL_SPI_FLASH_SUPPORT=y
16CONFIG_SPL_SPI_SUPPORT=y
17CONFIG_SPL_WATCHDOG_SUPPORT=y
18CONFIG_SPL_FAT_SUPPORT=y
19CONFIG_DEFAULT_DEVICE_TREE="am335x-draco"
20CONFIG_ENV_IS_IN_NAND=y
21CONFIG_BOOTDELAY=3
22CONFIG_SYS_CONSOLE_INFO_QUIET=y
23# CONFIG_DISPLAY_BOARDINFO is not set
24CONFIG_ARCH_MISC_INIT=y
25CONFIG_SPL=y
26CONFIG_SPL_I2C_SUPPORT=y
27CONFIG_SPL_YMODEM_SUPPORT=y
28CONFIG_HUSH_PARSER=y
29CONFIG_SYS_PROMPT="U-Boot# "
30CONFIG_AUTOBOOT_KEYED=y
31CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n"
32CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b"
33# CONFIG_CMD_IMLS is not set
34CONFIG_CMD_ASKENV=y
35# CONFIG_CMD_FLASH is not set
36CONFIG_CMD_MMC=y
37CONFIG_CMD_NAND=y
38CONFIG_CMD_SF=y
39CONFIG_CMD_I2C=y
40CONFIG_CMD_USB=y
41CONFIG_CMD_DFU=y
42CONFIG_CMD_GPIO=y
43# CONFIG_CMD_SETEXPR is not set
44CONFIG_CMD_DHCP=y
45CONFIG_CMD_MII=y
46CONFIG_CMD_PING=y
47CONFIG_CMD_CACHE=y
48CONFIG_CMD_TIME=y
49CONFIG_CMD_EXT2=y
50CONFIG_CMD_UBI=y
51# CONFIG_DOS_PARTITION is not set
52CONFIG_OF_CONTROL=y
53CONFIG_OF_EMBED=y
54CONFIG_DFU_NAND=y
55CONFIG_MMC_OMAP_HS=y
56CONFIG_NAND=y
57CONFIG_SPI_FLASH=y
58CONFIG_SPI_FLASH_WINBOND=y
59CONFIG_MTD_UBI_FASTMAP=y
60CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT=1
61CONFIG_PHYLIB=y
62CONFIG_SYS_NS16550=y
63CONFIG_OMAP3_SPI=y
64CONFIG_USB=y
65CONFIG_USB_MUSB_HOST=y
66CONFIG_USB_MUSB_GADGET=y
67CONFIG_USB_STORAGE=y
68CONFIG_USB_GADGET=y
69CONFIG_USB_GADGET_DOWNLOAD=y
70CONFIG_G_DNL_MANUFACTURER="Siemens AG"
71CONFIG_G_DNL_VENDOR_NUM=0x0908
72CONFIG_G_DNL_PRODUCT_NUM=0x02d2
73