xref: /openbmc/u-boot/configs/taurus_defconfig (revision fbe502e9)
1CONFIG_ARM=y
2CONFIG_SPL_SYS_THUMB_BUILD=y
3# CONFIG_SPL_USE_ARCH_MEMCPY is not set
4# CONFIG_SPL_USE_ARCH_MEMSET is not set
5CONFIG_ARCH_AT91=y
6CONFIG_SPL_LDSCRIPT="arch/$(ARCH)/cpu/u-boot-spl.lds"
7CONFIG_SYS_TEXT_BASE=0x21000000
8CONFIG_TARGET_TAURUS=y
9CONFIG_SPL_GPIO_SUPPORT=y
10CONFIG_SPL_LIBCOMMON_SUPPORT=y
11CONFIG_SPL_LIBGENERIC_SUPPORT=y
12CONFIG_SYS_MALLOC_F_LEN=0x1000
13CONFIG_SPL_SERIAL_SUPPORT=y
14CONFIG_SPL_NAND_SUPPORT=y
15CONFIG_SPL_SPI_FLASH_SUPPORT=y
16CONFIG_SPL_SPI_SUPPORT=y
17CONFIG_SPL=y
18CONFIG_DEFAULT_DEVICE_TREE="at91sam9g20-taurus"
19CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2067,BOARD_TAURUS"
20CONFIG_BOOTDELAY=3
21CONFIG_USE_BOOTARGS=y
22CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2"
23# CONFIG_DISPLAY_BOARDINFO is not set
24CONFIG_BOARD_EARLY_INIT_F=y
25CONFIG_SPL_SPI_LOAD=y
26CONFIG_HUSH_PARSER=y
27CONFIG_SYS_PROMPT="U-Boot> "
28# CONFIG_CMD_BDI is not set
29CONFIG_CMD_BOOTZ=y
30# CONFIG_CMD_IMI is not set
31CONFIG_CMD_DFU=y
32# CONFIG_CMD_LOADS is not set
33CONFIG_CMD_NAND=y
34CONFIG_CMD_SF=y
35CONFIG_CMD_SPI=y
36CONFIG_CMD_USB=y
37# CONFIG_CMD_SOURCE is not set
38# CONFIG_CMD_SETEXPR is not set
39CONFIG_CMD_DHCP=y
40CONFIG_CMD_PING=y
41CONFIG_CMD_MTDPARTS=y
42# CONFIG_DOS_PARTITION is not set
43CONFIG_OF_CONTROL=y
44CONFIG_OF_EMBED=y
45CONFIG_ENV_IS_IN_NAND=y
46CONFIG_CLK=y
47CONFIG_CLK_AT91=y
48CONFIG_DFU_NAND=y
49# CONFIG_MMC is not set
50CONFIG_SPI_FLASH=y
51CONFIG_SPI_FLASH_STMICRO=y
52CONFIG_PHYLIB=y
53CONFIG_USB=y
54CONFIG_USB_STORAGE=y
55CONFIG_USB_GADGET=y
56CONFIG_USB_GADGET_MANUFACTURER="Siemens AG"
57CONFIG_USB_GADGET_VENDOR_NUM=0x0908
58CONFIG_USB_GADGET_PRODUCT_NUM=0x02d2
59CONFIG_USB_GADGET_DOWNLOAD=y
60CONFIG_USE_TINY_PRINTF=y
61