1CONFIG_ARM=y 2CONFIG_SPL_SYS_THUMB_BUILD=y 3# CONFIG_SPL_USE_ARCH_MEMCPY is not set 4# CONFIG_SPL_USE_ARCH_MEMSET is not set 5CONFIG_ARCH_AT91=y 6CONFIG_SPL_LDSCRIPT="arch/$(ARCH)/cpu/u-boot-spl.lds" 7CONFIG_SYS_TEXT_BASE=0x21000000 8CONFIG_TARGET_TAURUS=y 9CONFIG_SPL_GPIO_SUPPORT=y 10CONFIG_SPL_LIBCOMMON_SUPPORT=y 11CONFIG_SPL_LIBGENERIC_SUPPORT=y 12CONFIG_SYS_MALLOC_F_LEN=0x1000 13CONFIG_SPL_SERIAL_SUPPORT=y 14CONFIG_SPL=y 15CONFIG_SPL_SPI_FLASH_SUPPORT=y 16CONFIG_SPL_SPI_SUPPORT=y 17CONFIG_DEFAULT_DEVICE_TREE="at91sam9g20-taurus" 18CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2067,BOARD_TAURUS" 19CONFIG_BOOTDELAY=3 20CONFIG_USE_BOOTARGS=y 21CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2" 22# CONFIG_DISPLAY_BOARDINFO is not set 23CONFIG_BOARD_EARLY_INIT_F=y 24CONFIG_SPL_NAND_SUPPORT=y 25CONFIG_SPL_SPI_LOAD=y 26CONFIG_HUSH_PARSER=y 27CONFIG_SYS_PROMPT="U-Boot> " 28# CONFIG_CMD_BDI is not set 29CONFIG_CMD_BOOTZ=y 30# CONFIG_CMD_IMI is not set 31CONFIG_CMD_DFU=y 32# CONFIG_CMD_LOADS is not set 33CONFIG_CMD_NAND=y 34CONFIG_CMD_SF=y 35CONFIG_CMD_SPI=y 36CONFIG_CMD_USB=y 37# CONFIG_CMD_SOURCE is not set 38# CONFIG_CMD_SETEXPR is not set 39CONFIG_CMD_DHCP=y 40CONFIG_CMD_PING=y 41CONFIG_CMD_MTDPARTS=y 42# CONFIG_DOS_PARTITION is not set 43CONFIG_OF_CONTROL=y 44CONFIG_OF_EMBED=y 45CONFIG_ENV_IS_IN_NAND=y 46CONFIG_CLK=y 47CONFIG_CLK_AT91=y 48CONFIG_DFU_NAND=y 49# CONFIG_MMC is not set 50CONFIG_NAND=y 51CONFIG_NAND_ATMEL=y 52CONFIG_MTD_PARTITIONS=y 53CONFIG_SPI_FLASH=y 54CONFIG_SPI_FLASH_STMICRO=y 55CONFIG_PHYLIB=y 56CONFIG_USB=y 57CONFIG_USB_STORAGE=y 58CONFIG_USB_GADGET=y 59CONFIG_USB_GADGET_MANUFACTURER="Siemens AG" 60CONFIG_USB_GADGET_VENDOR_NUM=0x0908 61CONFIG_USB_GADGET_PRODUCT_NUM=0x02d2 62CONFIG_USB_GADGET_DOWNLOAD=y 63CONFIG_USE_TINY_PRINTF=y 64