1CONFIG_ARM=y 2CONFIG_SPL_SYS_THUMB_BUILD=y 3# CONFIG_SPL_USE_ARCH_MEMCPY is not set 4# CONFIG_SPL_USE_ARCH_MEMSET is not set 5CONFIG_ARCH_AT91=y 6CONFIG_SPL_LDSCRIPT="arch/$(ARCH)/cpu/u-boot-spl.lds" 7CONFIG_TARGET_TAURUS=y 8CONFIG_SPL_GPIO_SUPPORT=y 9CONFIG_SPL_LIBCOMMON_SUPPORT=y 10CONFIG_SPL_LIBGENERIC_SUPPORT=y 11CONFIG_SYS_MALLOC_F_LEN=0x1000 12CONFIG_SPL_SERIAL_SUPPORT=y 13CONFIG_SPL_NAND_SUPPORT=y 14CONFIG_SPL_SPI_FLASH_SUPPORT=y 15CONFIG_SPL_SPI_SUPPORT=y 16CONFIG_DEFAULT_DEVICE_TREE="at91sam9g20-taurus" 17CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2067,BOARD_TAURUS" 18CONFIG_BOOTDELAY=3 19CONFIG_LOGLEVEL=4 20CONFIG_USE_BOOTARGS=y 21CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2" 22# CONFIG_DISPLAY_BOARDINFO is not set 23CONFIG_BOARD_EARLY_INIT_F=y 24CONFIG_SPL=y 25CONFIG_HUSH_PARSER=y 26CONFIG_SYS_PROMPT="U-Boot> " 27# CONFIG_CMD_BDI is not set 28CONFIG_CMD_BOOTZ=y 29# CONFIG_CMD_IMI is not set 30# CONFIG_CMD_IMLS is not set 31CONFIG_CMD_DFU=y 32# CONFIG_CMD_FPGA is not set 33# CONFIG_CMD_LOADS is not set 34CONFIG_CMD_NAND=y 35CONFIG_CMD_SF=y 36CONFIG_CMD_SPI=y 37CONFIG_CMD_USB=y 38# CONFIG_CMD_SOURCE is not set 39# CONFIG_CMD_SETEXPR is not set 40CONFIG_CMD_DHCP=y 41CONFIG_CMD_PING=y 42CONFIG_CMD_MTDPARTS=y 43# CONFIG_DOS_PARTITION is not set 44CONFIG_OF_CONTROL=y 45CONFIG_OF_EMBED=y 46CONFIG_ENV_IS_IN_NAND=y 47CONFIG_CLK=y 48CONFIG_CLK_AT91=y 49CONFIG_DFU_NAND=y 50# CONFIG_MMC is not set 51CONFIG_SPI_FLASH=y 52CONFIG_SPI_FLASH_STMICRO=y 53CONFIG_PHYLIB=y 54CONFIG_USB=y 55CONFIG_USB_STORAGE=y 56CONFIG_USB_GADGET=y 57CONFIG_USB_GADGET_DOWNLOAD=y 58CONFIG_G_DNL_MANUFACTURER="Siemens AG" 59CONFIG_G_DNL_VENDOR_NUM=0x0908 60CONFIG_G_DNL_PRODUCT_NUM=0x02d2 61CONFIG_USE_TINY_PRINTF=y 62