xref: /openbmc/u-boot/configs/smartweb_defconfig (revision ecab65e4)
1CONFIG_ARM=y
2CONFIG_SPL_SYS_THUMB_BUILD=y
3# CONFIG_SPL_USE_ARCH_MEMCPY is not set
4# CONFIG_SPL_USE_ARCH_MEMSET is not set
5CONFIG_ARCH_AT91=y
6CONFIG_SYS_TEXT_BASE=0x23000000
7CONFIG_TARGET_SMARTWEB=y
8CONFIG_SPL_GPIO_SUPPORT=y
9CONFIG_SPL_LIBCOMMON_SUPPORT=y
10CONFIG_SPL_LIBGENERIC_SUPPORT=y
11CONFIG_SYS_MALLOC_F_LEN=0x2000
12CONFIG_SPL_SYS_MALLOC_F_LEN=0x400
13CONFIG_SPL=y
14CONFIG_NR_DRAM_BANKS=1
15CONFIG_FIT=y
16CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260"
17CONFIG_BOOTDELAY=3
18# CONFIG_DISPLAY_BOARDINFO is not set
19CONFIG_BOARD_EARLY_INIT_F=y
20CONFIG_SPL_NAND_SUPPORT=y
21CONFIG_HUSH_PARSER=y
22CONFIG_SYS_PROMPT="U-Boot# "
23CONFIG_AUTOBOOT_KEYED=y
24CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n"
25CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b"
26# CONFIG_CMD_IMI is not set
27CONFIG_CMD_DFU=y
28# CONFIG_CMD_LOADS is not set
29CONFIG_CMD_NAND=y
30CONFIG_CMD_USB=y
31# CONFIG_CMD_SOURCE is not set
32CONFIG_CMD_DHCP=y
33CONFIG_CMD_PING=y
34CONFIG_CMD_FAT=y
35CONFIG_CMD_MTDPARTS=y
36CONFIG_MTDIDS_DEFAULT="nand0=atmel_nand"
37CONFIG_MTDPARTS_DEFAULT="mtdparts=atmel_nand:128k(Bootstrap),896k(U-Boot),512k(ENV0),512k(ENV1),4M(Linux),-(Root-FS)"
38# CONFIG_DOS_PARTITION is not set
39CONFIG_OF_CONTROL=y
40CONFIG_OF_EMBED=y
41CONFIG_DEFAULT_DEVICE_TREE="at91sam9260-smartweb"
42CONFIG_ENV_IS_IN_NAND=y
43CONFIG_CLK=y
44CONFIG_CLK_AT91=y
45CONFIG_DFU_NAND=y
46# CONFIG_MMC is not set
47CONFIG_NAND=y
48CONFIG_NAND_ATMEL=y
49CONFIG_PHYLIB=y
50CONFIG_USB=y
51CONFIG_DM_USB=y
52CONFIG_USB_GADGET=y
53CONFIG_USB_GADGET_MANUFACTURER="Siemens AG"
54CONFIG_USB_GADGET_VENDOR_NUM=0x0908
55CONFIG_USB_GADGET_PRODUCT_NUM=0x02d2
56CONFIG_USB_GADGET_DOWNLOAD=y
57CONFIG_USB_HOST_ETHER=y
58CONFIG_USB_ETHER_ASIX=y
59CONFIG_USB_ETHER_MCS7830=y
60CONFIG_WDT=y
61CONFIG_WDT_AT91=y
62CONFIG_AT91_HW_WDT_TIMEOUT=y
63CONFIG_SPL_TINY_MEMSET=y
64# CONFIG_EFI_LOADER is not set
65