xref: /openbmc/u-boot/configs/smartweb_defconfig (revision 193f6fb9)
1CONFIG_ARM=y
2CONFIG_SPL_SYS_THUMB_BUILD=y
3# CONFIG_SPL_USE_ARCH_MEMCPY is not set
4# CONFIG_SPL_USE_ARCH_MEMSET is not set
5CONFIG_ARCH_AT91=y
6CONFIG_TARGET_SMARTWEB=y
7CONFIG_SPL_GPIO_SUPPORT=y
8CONFIG_SPL_LIBCOMMON_SUPPORT=y
9CONFIG_SPL_LIBGENERIC_SUPPORT=y
10CONFIG_SYS_MALLOC_F_LEN=0x2000
11CONFIG_SPL_NAND_SUPPORT=y
12CONFIG_DEFAULT_DEVICE_TREE="at91sam9260-smartweb"
13CONFIG_SPL_SYS_MALLOC_F_LEN=0x400
14CONFIG_FIT=y
15CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260"
16CONFIG_BOOTDELAY=3
17# CONFIG_DISPLAY_BOARDINFO is not set
18CONFIG_BOARD_EARLY_INIT_F=y
19CONFIG_SPL=y
20CONFIG_HUSH_PARSER=y
21CONFIG_SYS_PROMPT="U-Boot# "
22CONFIG_AUTOBOOT_KEYED=y
23CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n"
24CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b"
25# CONFIG_CMD_IMI is not set
26CONFIG_CMD_DFU=y
27# CONFIG_CMD_FPGA is not set
28# CONFIG_CMD_LOADS is not set
29CONFIG_CMD_NAND=y
30CONFIG_CMD_USB=y
31# CONFIG_CMD_SOURCE is not set
32CONFIG_CMD_DHCP=y
33CONFIG_CMD_PING=y
34CONFIG_CMD_FAT=y
35CONFIG_CMD_MTDPARTS=y
36CONFIG_MTDIDS_DEFAULT="nand0=atmel_nand"
37CONFIG_MTDPARTS_DEFAULT="mtdparts=atmel_nand:128k(Bootstrap),896k(U-Boot),512k(ENV0),512k(ENV1),4M(Linux),-(Root-FS)"
38# CONFIG_DOS_PARTITION is not set
39CONFIG_OF_CONTROL=y
40CONFIG_OF_EMBED=y
41CONFIG_ENV_IS_IN_NAND=y
42CONFIG_CLK=y
43CONFIG_CLK_AT91=y
44CONFIG_DFU_NAND=y
45# CONFIG_MMC is not set
46CONFIG_PHYLIB=y
47CONFIG_USB=y
48CONFIG_DM_USB=y
49CONFIG_USB_GADGET=y
50CONFIG_USB_GADGET_MANUFACTURER="Siemens AG"
51CONFIG_USB_GADGET_VENDOR_NUM=0x0908
52CONFIG_USB_GADGET_PRODUCT_NUM=0x02d2
53CONFIG_USB_GADGET_DOWNLOAD=y
54CONFIG_USB_HOST_ETHER=y
55CONFIG_USB_ETHER_ASIX=y
56CONFIG_USB_ETHER_MCS7830=y
57# CONFIG_EFI_LOADER is not set
58