1CONFIG_ARM=y
2CONFIG_ARCH_AT91=y
3CONFIG_TARGET_SAMA5D3_XPLAINED=y
4CONFIG_SPL_GPIO_SUPPORT=y
5CONFIG_SPL_LIBCOMMON_SUPPORT=y
6CONFIG_SPL_LIBGENERIC_SUPPORT=y
7CONFIG_SYS_MALLOC_F_LEN=0x2000
8CONFIG_SPL_SERIAL_SUPPORT=y
9CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
10CONFIG_SPL_NAND_SUPPORT=y
11CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d3_xplained"
12CONFIG_DEBUG_UART=y
13CONFIG_FIT=y
14CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_NANDFLASH"
15CONFIG_ENV_IS_IN_NAND=y
16CONFIG_BOOTDELAY=3
17# CONFIG_DISPLAY_BOARDINFO is not set
18CONFIG_SPL=y
19CONFIG_HUSH_PARSER=y
20CONFIG_CMD_BOOTZ=y
21# CONFIG_CMD_IMI is not set
22# CONFIG_CMD_IMLS is not set
23# CONFIG_CMD_LOADS is not set
24# CONFIG_CMD_FLASH is not set
25CONFIG_CMD_MMC=y
26CONFIG_CMD_NAND=y
27CONFIG_CMD_NAND_TRIMFFS=y
28CONFIG_CMD_USB=y
29# CONFIG_CMD_FPGA is not set
30CONFIG_CMD_DHCP=y
31CONFIG_CMD_MII=y
32CONFIG_CMD_PING=y
33CONFIG_CMD_EXT4=y
34CONFIG_CMD_EXT4_WRITE=y
35CONFIG_CMD_FAT=y
36CONFIG_CMD_UBI=y
37CONFIG_OF_CONTROL=y
38CONFIG_SPL_OF_CONTROL=y
39CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dmas dma-names"
40CONFIG_DM=y
41CONFIG_SPL_DM=y
42CONFIG_SPL_DM_SEQ_ALIAS=y
43CONFIG_CLK=y
44CONFIG_SPL_CLK=y
45CONFIG_CLK_AT91=y
46CONFIG_AT91_UTMI=y
47CONFIG_AT91_H32MX=y
48CONFIG_DM_GPIO=y
49CONFIG_AT91_GPIO=y
50CONFIG_DM_MMC=y
51CONFIG_GENERIC_ATMEL_MCI=y
52CONFIG_DM_ETH=y
53CONFIG_MACB=y
54CONFIG_PINCTRL=y
55CONFIG_SPL_PINCTRL=y
56CONFIG_PINCTRL_AT91=y
57CONFIG_DM_SERIAL=y
58CONFIG_DEBUG_UART_ATMEL=y
59CONFIG_DEBUG_UART_BASE=0xffffee00
60CONFIG_DEBUG_UART_CLOCK=132000000
61CONFIG_DEBUG_UART_BOARD_INIT=y
62CONFIG_DEBUG_UART_ANNOUNCE=y
63CONFIG_ATMEL_USART=y
64CONFIG_USB=y
65CONFIG_DM_USB=y
66CONFIG_USB_EHCI_HCD=y
67CONFIG_USB_STORAGE=y
68CONFIG_FAT_WRITE=y
69