1CONFIG_ARM=y
2CONFIG_ARCH_AT91=y
3CONFIG_SYS_TEXT_BASE=0x26f00000
4CONFIG_TARGET_SAMA5D3_XPLAINED=y
5CONFIG_SPL_GPIO_SUPPORT=y
6CONFIG_SPL_LIBCOMMON_SUPPORT=y
7CONFIG_SPL_LIBGENERIC_SUPPORT=y
8CONFIG_SYS_MALLOC_F_LEN=0x2000
9CONFIG_SPL_SERIAL_SUPPORT=y
10CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
11CONFIG_SPL=y
12CONFIG_DEBUG_UART_BOARD_INIT=y
13CONFIG_DEBUG_UART_BASE=0xffffee00
14CONFIG_DEBUG_UART_CLOCK=132000000
15CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d3_xplained"
16CONFIG_DEBUG_UART=y
17CONFIG_ENV_VARS_UBOOT_CONFIG=y
18CONFIG_FIT=y
19CONFIG_NAND_BOOT=y
20CONFIG_BOOTDELAY=3
21CONFIG_USE_BOOTARGS=y
22CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256K(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs"
23# CONFIG_DISPLAY_BOARDINFO is not set
24CONFIG_SPL_NAND_SUPPORT=y
25CONFIG_HUSH_PARSER=y
26CONFIG_CMD_BOOTZ=y
27# CONFIG_CMD_IMI is not set
28# CONFIG_CMD_FLASH is not set
29# CONFIG_CMD_LOADS is not set
30CONFIG_CMD_MMC=y
31CONFIG_CMD_NAND=y
32CONFIG_CMD_NAND_TRIMFFS=y
33CONFIG_CMD_USB=y
34CONFIG_CMD_DHCP=y
35CONFIG_CMD_MII=y
36CONFIG_CMD_PING=y
37CONFIG_CMD_EXT4=y
38CONFIG_CMD_EXT4_WRITE=y
39CONFIG_CMD_FAT=y
40CONFIG_CMD_UBI=y
41CONFIG_OF_CONTROL=y
42CONFIG_SPL_OF_CONTROL=y
43CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dmas dma-names"
44CONFIG_ENV_IS_IN_NAND=y
45CONFIG_DM=y
46CONFIG_SPL_DM=y
47CONFIG_SPL_DM_SEQ_ALIAS=y
48CONFIG_CLK=y
49CONFIG_SPL_CLK=y
50CONFIG_CLK_AT91=y
51CONFIG_AT91_UTMI=y
52CONFIG_AT91_H32MX=y
53CONFIG_DM_GPIO=y
54CONFIG_AT91_GPIO=y
55CONFIG_DM_MMC=y
56CONFIG_GENERIC_ATMEL_MCI=y
57CONFIG_NAND_ATMEL=y
58CONFIG_DM_ETH=y
59CONFIG_MACB=y
60CONFIG_PINCTRL=y
61CONFIG_SPL_PINCTRL=y
62CONFIG_PINCTRL_AT91=y
63CONFIG_DM_SERIAL=y
64CONFIG_DEBUG_UART_ATMEL=y
65CONFIG_DEBUG_UART_ANNOUNCE=y
66CONFIG_ATMEL_USART=y
67CONFIG_TIMER=y
68CONFIG_SPL_TIMER=y
69CONFIG_ATMEL_PIT_TIMER=y
70CONFIG_USB=y
71CONFIG_DM_USB=y
72CONFIG_USB_EHCI_HCD=y
73CONFIG_USB_STORAGE=y
74CONFIG_FAT_WRITE=y
75