xref: /openbmc/u-boot/configs/rastaban_defconfig (revision e30d2bd4)
1CONFIG_ARM=y
2CONFIG_ARCH_OMAP2PLUS=y
3CONFIG_SPL_GPIO_SUPPORT=y
4CONFIG_SPL_LIBCOMMON_SUPPORT=y
5CONFIG_SPL_LIBGENERIC_SUPPORT=y
6CONFIG_SYS_MALLOC_F_LEN=0x2000
7CONFIG_TARGET_RASTABAN=y
8CONFIG_SPL_MMC_SUPPORT=y
9CONFIG_SPL_SERIAL_SUPPORT=y
10CONFIG_SPL_LIBDISK_SUPPORT=y
11CONFIG_SPL_NAND_SUPPORT=y
12CONFIG_SPL_SPI_FLASH_SUPPORT=y
13CONFIG_SPL_SPI_SUPPORT=y
14CONFIG_SPL_WATCHDOG_SUPPORT=y
15CONFIG_SPL_FAT_SUPPORT=y
16CONFIG_DEFAULT_DEVICE_TREE="am335x-draco"
17CONFIG_BOOTDELAY=3
18CONFIG_SYS_CONSOLE_INFO_QUIET=y
19# CONFIG_DISPLAY_BOARDINFO is not set
20CONFIG_ARCH_MISC_INIT=y
21CONFIG_SPL=y
22CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
23CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
24CONFIG_SPL_I2C_SUPPORT=y
25CONFIG_SPL_YMODEM_SUPPORT=y
26CONFIG_HUSH_PARSER=y
27CONFIG_SYS_PROMPT="U-Boot# "
28CONFIG_AUTOBOOT_KEYED=y
29CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n"
30CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b"
31# CONFIG_CMD_IMLS is not set
32CONFIG_CMD_ASKENV=y
33# CONFIG_CMD_FLASH is not set
34CONFIG_CMD_MMC=y
35CONFIG_CMD_SF=y
36CONFIG_CMD_I2C=y
37CONFIG_CMD_USB=y
38CONFIG_CMD_DFU=y
39CONFIG_CMD_GPIO=y
40# CONFIG_CMD_SETEXPR is not set
41CONFIG_CMD_DHCP=y
42CONFIG_CMD_MII=y
43CONFIG_CMD_PING=y
44CONFIG_CMD_CACHE=y
45CONFIG_CMD_TIME=y
46CONFIG_CMD_EXT2=y
47CONFIG_CMD_UBI=y
48# CONFIG_DOS_PARTITION is not set
49CONFIG_OF_CONTROL=y
50CONFIG_OF_EMBED=y
51CONFIG_DFU_NAND=y
52CONFIG_MMC_OMAP_HS=y
53CONFIG_SPI_FLASH=y
54CONFIG_SPI_FLASH_WINBOND=y
55CONFIG_MTD_UBI_FASTMAP=y
56CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT=1
57CONFIG_SYS_NS16550=y
58CONFIG_USB=y
59CONFIG_USB_MUSB_HOST=y
60CONFIG_USB_MUSB_GADGET=y
61CONFIG_USB_STORAGE=y
62CONFIG_USB_GADGET=y
63CONFIG_USB_GADGET_DOWNLOAD=y
64CONFIG_G_DNL_MANUFACTURER="Siemens AG"
65CONFIG_G_DNL_VENDOR_NUM=0x0908
66CONFIG_G_DNL_PRODUCT_NUM=0x02d2
67