1CONFIG_ARM=y
2CONFIG_ARCH_ROCKCHIP=y
3CONFIG_TARGET_PUMA_RK3399=y
4CONFIG_SPL_LIBCOMMON_SUPPORT=y
5CONFIG_SPL_LIBGENERIC_SUPPORT=y
6CONFIG_SYS_MALLOC_F_LEN=0x4000
7CONFIG_ROCKCHIP_RK3399=y
8CONFIG_SPL_SPI_FLASH_SUPPORT=y
9CONFIG_SPL_SPI_SUPPORT=y
10CONFIG_SPL_STACK_R_ADDR=0x80000
11CONFIG_DEFAULT_DEVICE_TREE="rk3399-puma"
12CONFIG_FIT=y
13CONFIG_SPL_FIT=y
14CONFIG_SPL_LOAD_FIT=y
15CONFIG_SPL_FIT_SOURCE="board/theobroma-systems/puma_rk3399/fit_spl_atf.its"
16# CONFIG_DISPLAY_CPUINFO is not set
17# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
18# CONFIG_SPL_LEGACY_IMAGE_SUPPORT is not set
19CONFIG_SPL_STACK_R=y
20CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
21CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200
22CONFIG_CMD_BOOTZ=y
23# CONFIG_CMD_IMLS is not set
24CONFIG_CMD_GPT=y
25CONFIG_CMD_MMC=y
26CONFIG_CMD_SF=y
27CONFIG_CMD_SPI=y
28CONFIG_CMD_USB=y
29# CONFIG_CMD_SETEXPR is not set
30CONFIG_CMD_TIME=y
31CONFIG_SPL_OF_CONTROL=y
32CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
33CONFIG_REGMAP=y
34CONFIG_SPL_REGMAP=y
35CONFIG_SYSCON=y
36CONFIG_SPL_SYSCON=y
37CONFIG_CLK=y
38CONFIG_SPL_CLK=y
39CONFIG_ROCKCHIP_GPIO=y
40CONFIG_MMC_DW=y
41CONFIG_MMC_DW_ROCKCHIP=y
42CONFIG_MMC_SDHCI=y
43CONFIG_MMC_SDHCI_ROCKCHIP=y
44CONFIG_SPI_FLASH=y
45CONFIG_SPI_FLASH_WINBOND=y
46CONFIG_PHY_MICREL=y
47CONFIG_PHY_MICREL_KSZ9031=y
48CONFIG_DM_ETH=y
49CONFIG_ETH_DESIGNWARE=y
50CONFIG_GMAC_ROCKCHIP=y
51CONFIG_PINCTRL=y
52CONFIG_SPL_PINCTRL=y
53CONFIG_PINCTRL_ROCKCHIP_RK3399=y
54CONFIG_REGULATOR_PWM=y
55CONFIG_DM_REGULATOR_FIXED=y
56CONFIG_PWM_ROCKCHIP=y
57CONFIG_RAM=y
58CONFIG_SPL_RAM=y
59CONFIG_BAUDRATE=115200
60CONFIG_DEBUG_UART=y
61CONFIG_DEBUG_UART_BASE=0xFF180000
62CONFIG_DEBUG_UART_CLOCK=24000000
63CONFIG_DEBUG_UART_SHIFT=2
64CONFIG_SYS_NS16550=y
65CONFIG_ROCKCHIP_SPI=y
66CONFIG_SYSRESET=y
67CONFIG_USB=y
68CONFIG_USB_XHCI_HCD=y
69CONFIG_USB_XHCI_DWC3=y
70CONFIG_USB_EHCI_HCD=y
71CONFIG_USB_EHCI_GENERIC=y
72CONFIG_USB_STORAGE=y
73CONFIG_ERRNO_STR=y
74