xref: /openbmc/u-boot/configs/pfla02_defconfig (revision f00c2628)
1CONFIG_ARM=y
2CONFIG_ARCH_MX6=y
3CONFIG_SYS_TEXT_BASE=0x17800000
4CONFIG_SPL_GPIO_SUPPORT=y
5CONFIG_SPL_LIBCOMMON_SUPPORT=y
6CONFIG_SPL_LIBGENERIC_SUPPORT=y
7CONFIG_TARGET_PFLA02=y
8CONFIG_SPL_MMC_SUPPORT=y
9CONFIG_SPL_SERIAL_SUPPORT=y
10CONFIG_SPL=y
11CONFIG_SPL_LIBDISK_SUPPORT=y
12CONFIG_SPL_SPI_FLASH_SUPPORT=y
13CONFIG_SPL_SPI_SUPPORT=y
14CONFIG_CMD_HDMIDETECT=y
15CONFIG_DISTRO_DEFAULTS=y
16CONFIG_NR_DRAM_BANKS=1
17CONFIG_FIT=y
18CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
19CONFIG_BOOTDELAY=3
20# CONFIG_USE_BOOTCOMMAND is not set
21CONFIG_DISPLAY_BOARDINFO_LATE=y
22CONFIG_BOUNCE_BUFFER=y
23CONFIG_BOARD_EARLY_INIT_F=y
24CONFIG_SPL_DMA_SUPPORT=y
25CONFIG_SPL_FS_EXT4=y
26CONFIG_SPL_I2C_SUPPORT=y
27CONFIG_SPL_SPI_LOAD=y
28CONFIG_SPL_WATCHDOG_SUPPORT=y
29CONFIG_SPL_YMODEM_SUPPORT=y
30# CONFIG_CMD_FLASH is not set
31CONFIG_CMD_GPIO=y
32CONFIG_CMD_I2C=y
33CONFIG_CMD_MMC=y
34# CONFIG_CMD_NAND is not set
35CONFIG_CMD_SF=y
36CONFIG_CMD_CACHE=y
37CONFIG_CMD_EXT4_WRITE=y
38CONFIG_CMD_MTDPARTS=y
39CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
40CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:-(nand);spi2.0:1024k(bootloader),64k(env1),64k(env2),-(rescue)"
41CONFIG_CMD_UBI=y
42# CONFIG_SPL_PARTITION_UUIDS is not set
43CONFIG_DM=y
44CONFIG_FSL_ESDHC=y
45CONFIG_MTD=y
46CONFIG_NAND=y
47CONFIG_NAND_MXS=y
48CONFIG_SPI_FLASH=y
49CONFIG_SF_DEFAULT_BUS=2
50CONFIG_SF_DEFAULT_MODE=0
51CONFIG_SF_DEFAULT_SPEED=20000000
52CONFIG_SPI_FLASH_STMICRO=y
53CONFIG_PHYLIB=y
54CONFIG_PHY_MICREL=y
55CONFIG_PHY_MICREL_KSZ90X1=y
56CONFIG_FEC_MXC=y
57CONFIG_MII=y
58CONFIG_SPI=y
59CONFIG_MXC_SPI=y
60CONFIG_DM_THERMAL=y
61CONFIG_OF_LIBFDT=y
62