xref: /openbmc/u-boot/configs/pengwyn_defconfig (revision 3ba98ed8)
1CONFIG_ARM=y
2CONFIG_ARCH_OMAP2PLUS=y
3CONFIG_SPL_GPIO_SUPPORT=y
4CONFIG_SPL_LIBCOMMON_SUPPORT=y
5CONFIG_SPL_LIBGENERIC_SUPPORT=y
6CONFIG_AM33XX=y
7CONFIG_TARGET_PENGWYN=y
8CONFIG_SPL_MMC_SUPPORT=y
9CONFIG_SPL_SERIAL_SUPPORT=y
10CONFIG_SPL=y
11CONFIG_SPL_FS_FAT=y
12CONFIG_SPL_LIBDISK_SUPPORT=y
13CONFIG_DISTRO_DEFAULTS=y
14# CONFIG_USE_BOOTCOMMAND is not set
15CONFIG_SYS_CONSOLE_INFO_QUIET=y
16CONFIG_VERSION_VARIABLE=y
17CONFIG_ARCH_MISC_INIT=y
18CONFIG_SPL_ENV_SUPPORT=y
19CONFIG_SPL_ETH_SUPPORT=y
20CONFIG_SPL_FS_EXT4=y
21CONFIG_SPL_I2C_SUPPORT=y
22CONFIG_SPL_MTD_SUPPORT=y
23CONFIG_SPL_NET_SUPPORT=y
24CONFIG_SPL_NET_VCI_STRING="AM335x U-Boot SPL"
25CONFIG_SPL_OS_BOOT=y
26CONFIG_SPL_POWER_SUPPORT=y
27CONFIG_SPL_WATCHDOG_SUPPORT=y
28CONFIG_SPL_YMODEM_SUPPORT=y
29CONFIG_CMD_SPL=y
30CONFIG_CMD_SPL_NAND_OFS=0x240000
31CONFIG_CMD_ASKENV=y
32CONFIG_CMD_EEPROM=y
33# CONFIG_CMD_FLASH is not set
34CONFIG_CMD_GPIO=y
35CONFIG_CMD_I2C=y
36CONFIG_CMD_MMC=y
37CONFIG_CMD_NAND=y
38CONFIG_CMD_SPI=y
39CONFIG_CMD_USB=y
40# CONFIG_CMD_SETEXPR is not set
41CONFIG_CMD_WOL=y
42CONFIG_CMD_EXT4_WRITE=y
43CONFIG_CMD_MTDPARTS=y
44CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
45CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(SPL),512k(SPL.backup1),512k(SPL.backup2),512k(SPL.backup3),1536k(u-boot),512k(u-boot-spl-os),512k(u-boot-env),5m(kernel),-(rootfs)"
46CONFIG_CMD_DIAG=y
47CONFIG_ENV_IS_IN_NAND=y
48CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
49CONFIG_MMC_OMAP_HS=y
50CONFIG_NAND=y
51CONFIG_MII=y
52CONFIG_DRIVER_TI_CPSW=y
53CONFIG_SPI=y
54CONFIG_OMAP3_SPI=y
55CONFIG_USB=y
56CONFIG_USB_MUSB_HOST=y
57CONFIG_USB_MUSB_GADGET=y
58CONFIG_USB_MUSB_DSPS=y
59CONFIG_USB_GADGET=y
60CONFIG_FAT_WRITE=y
61CONFIG_OF_LIBFDT=y
62