1CONFIG_ARM=y 2CONFIG_TARGET_LS1046ARDB=y 3CONFIG_SYS_TEXT_BASE=0x82000000 4CONFIG_QSPI_AHB_INIT=y 5CONFIG_TFABOOT=y 6CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y 7CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y 8CONFIG_DISTRO_DEFAULTS=y 9CONFIG_NR_DRAM_BANKS=2 10CONFIG_FIT_VERBOSE=y 11CONFIG_OF_BOARD_SETUP=y 12CONFIG_BOOTDELAY=10 13CONFIG_USE_BOOTARGS=y 14CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" 15CONFIG_MISC_INIT_R=y 16CONFIG_CMD_GPT=y 17CONFIG_CMD_I2C=y 18CONFIG_CMD_MMC=y 19CONFIG_CMD_NAND=y 20CONFIG_CMD_PCI=y 21CONFIG_CMD_SF=y 22CONFIG_CMD_USB=y 23CONFIG_CMD_CACHE=y 24CONFIG_MP=y 25CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" 26CONFIG_OF_CONTROL=y 27CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb" 28CONFIG_ENV_IS_IN_SPI_FLASH=y 29CONFIG_DM=y 30CONFIG_FSL_CAAM=y 31CONFIG_FSL_ESDHC=y 32CONFIG_SPI_FLASH=y 33# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set 34CONFIG_PHYLIB=y 35CONFIG_PHY_AQUANTIA=y 36CONFIG_E1000=y 37CONFIG_PCI=y 38CONFIG_DM_PCI=y 39CONFIG_DM_PCI_COMPAT=y 40CONFIG_PCIE_LAYERSCAPE=y 41CONFIG_SYS_NS16550=y 42CONFIG_SPI=y 43CONFIG_DM_SPI=y 44CONFIG_FSL_QSPI=y 45CONFIG_USB=y 46CONFIG_DM_USB=y 47CONFIG_USB_XHCI_HCD=y 48CONFIG_USB_XHCI_DWC3=y 49CONFIG_USB_STORAGE=y 50CONFIG_BLK=y 51CONFIG_DM_MMC=y 52CONFIG_DM_SCSI=y 53CONFIG_SATA_CEVA=y 54CONFIG_SCSI_AHCI=y 55CONFIG_SCSI=y 56CONFIG_AHCI=y 57