1CONFIG_ARM=y
2CONFIG_TARGET_LS1046ARDB=y
3CONFIG_SYS_TEXT_BASE=0x82000000
4CONFIG_SECURE_BOOT=y
5CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
6CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
7CONFIG_QSPI_AHB_INIT=y
8CONFIG_DISTRO_DEFAULTS=y
9CONFIG_NR_DRAM_BANKS=2
10CONFIG_FIT_VERBOSE=y
11CONFIG_OF_BOARD_SETUP=y
12CONFIG_TFABOOT=y
13CONFIG_BOOTDELAY=10
14CONFIG_USE_BOOTARGS=y
15CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
16CONFIG_MISC_INIT_R=y
17CONFIG_CMD_GPT=y
18CONFIG_CMD_I2C=y
19CONFIG_CMD_MMC=y
20CONFIG_CMD_NAND=y
21CONFIG_CMD_PCI=y
22CONFIG_CMD_SF=y
23CONFIG_CMD_USB=y
24CONFIG_CMD_CACHE=y
25CONFIG_MP=y
26CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
27CONFIG_OF_CONTROL=y
28CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb"
29CONFIG_DM=y
30CONFIG_FSL_CAAM=y
31CONFIG_FSL_ESDHC=y
32CONFIG_SPI_FLASH=y
33# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
34CONFIG_PHYLIB=y
35CONFIG_PHY_AQUANTIA=y
36CONFIG_E1000=y
37CONFIG_PCI=y
38CONFIG_DM_PCI=y
39CONFIG_DM_PCI_COMPAT=y
40CONFIG_PCIE_LAYERSCAPE=y
41CONFIG_SYS_NS16550=y
42CONFIG_SPI=y
43CONFIG_DM_SPI=y
44CONFIG_ENV_IS_NOWHERE=y
45CONFIG_USB=y
46CONFIG_FSL_QSPI=y
47CONFIG_DM_USB=y
48CONFIG_USB_XHCI_HCD=y
49CONFIG_USB_XHCI_DWC3=y
50CONFIG_USB_STORAGE=y
51CONFIG_RSA=y
52CONFIG_BLK=y
53CONFIG_DM_MMC=y
54