1CONFIG_ARM=y 2CONFIG_TARGET_LS1046ARDB=y 3CONFIG_SYS_TEXT_BASE=0x82000000 4CONFIG_SPL_LIBCOMMON_SUPPORT=y 5CONFIG_SPL_LIBGENERIC_SUPPORT=y 6CONFIG_FSL_LS_PPA=y 7CONFIG_SPL_MMC_SUPPORT=y 8CONFIG_SPL_SERIAL_SUPPORT=y 9CONFIG_SPL_DRIVERS_MISC_SUPPORT=y 10CONFIG_SPL=y 11CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb" 12CONFIG_DISTRO_DEFAULTS=y 13CONFIG_NR_DRAM_BANKS=2 14CONFIG_FIT_VERBOSE=y 15CONFIG_OF_BOARD_SETUP=y 16CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL" 17CONFIG_SD_BOOT=y 18CONFIG_BOOTDELAY=10 19CONFIG_USE_BOOTARGS=y 20CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" 21CONFIG_MISC_INIT_R=y 22CONFIG_SPL_BOARD_INIT=y 23CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y 24CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110 25CONFIG_SPL_ENV_SUPPORT=y 26CONFIG_SPL_I2C_SUPPORT=y 27CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y 28CONFIG_SPL_WATCHDOG_SUPPORT=y 29CONFIG_CMD_GPT=y 30CONFIG_CMD_I2C=y 31CONFIG_CMD_MMC=y 32CONFIG_CMD_NAND=y 33CONFIG_CMD_PCI=y 34CONFIG_CMD_SF=y 35CONFIG_CMD_USB=y 36CONFIG_CMD_CACHE=y 37CONFIG_MP=y 38CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" 39# CONFIG_SPL_EFI_PARTITION is not set 40CONFIG_OF_CONTROL=y 41CONFIG_ENV_IS_IN_MMC=y 42CONFIG_DM=y 43CONFIG_FSL_CAAM=y 44CONFIG_FSL_ESDHC=y 45CONFIG_SPI_FLASH=y 46CONFIG_PHYLIB=y 47CONFIG_PHY_GIGE=y 48CONFIG_E1000=y 49CONFIG_PCI=y 50CONFIG_DM_PCI=y 51CONFIG_DM_PCI_COMPAT=y 52CONFIG_PCIE_LAYERSCAPE=y 53CONFIG_SYS_NS16550=y 54CONFIG_SPI=y 55CONFIG_DM_SPI=y 56CONFIG_FSL_QSPI=y 57CONFIG_USB=y 58CONFIG_DM_USB=y 59CONFIG_USB_XHCI_HCD=y 60CONFIG_USB_XHCI_DWC3=y 61CONFIG_USB_STORAGE=y 62