1CONFIG_ARM=y
2CONFIG_TARGET_LS1046ARDB=y
3CONFIG_SYS_TEXT_BASE=0x82000000
4CONFIG_SPL_LIBCOMMON_SUPPORT=y
5CONFIG_SPL_LIBGENERIC_SUPPORT=y
6CONFIG_FSL_LS_PPA=y
7CONFIG_SPL_MMC_SUPPORT=y
8CONFIG_SPL_SERIAL_SUPPORT=y
9CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
10CONFIG_SPL=y
11CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb"
12CONFIG_DISTRO_DEFAULTS=y
13CONFIG_NR_DRAM_BANKS=2
14CONFIG_FIT_VERBOSE=y
15CONFIG_OF_BOARD_SETUP=y
16CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL"
17CONFIG_SD_BOOT=y
18CONFIG_BOOTDELAY=10
19CONFIG_USE_BOOTARGS=y
20CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
21CONFIG_MISC_INIT_R=y
22CONFIG_SPL_BOARD_INIT=y
23CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
24CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110
25CONFIG_SPL_ENV_SUPPORT=y
26CONFIG_SPL_I2C_SUPPORT=y
27CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
28CONFIG_SPL_WATCHDOG_SUPPORT=y
29CONFIG_CMD_GPT=y
30CONFIG_CMD_I2C=y
31CONFIG_CMD_MMC=y
32CONFIG_CMD_NAND=y
33CONFIG_CMD_PCI=y
34CONFIG_CMD_SF=y
35CONFIG_CMD_USB=y
36CONFIG_CMD_CACHE=y
37CONFIG_MP=y
38CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
39# CONFIG_SPL_EFI_PARTITION is not set
40CONFIG_OF_CONTROL=y
41CONFIG_ENV_IS_IN_MMC=y
42CONFIG_DM=y
43CONFIG_FSL_CAAM=y
44CONFIG_FSL_ESDHC=y
45CONFIG_SPI_FLASH=y
46CONFIG_PHYLIB=y
47CONFIG_PHY_GIGE=y
48CONFIG_E1000=y
49CONFIG_PCI=y
50CONFIG_DM_PCI=y
51CONFIG_DM_PCI_COMPAT=y
52CONFIG_PCIE_LAYERSCAPE=y
53CONFIG_SYS_NS16550=y
54CONFIG_SPI=y
55CONFIG_DM_SPI=y
56CONFIG_FSL_QSPI=y
57CONFIG_USB=y
58CONFIG_DM_USB=y
59CONFIG_USB_XHCI_HCD=y
60CONFIG_USB_XHCI_DWC3=y
61CONFIG_USB_STORAGE=y
62