1CONFIG_ARM=y 2CONFIG_TARGET_LS1046ARDB=y 3CONFIG_SYS_TEXT_BASE=0x40100000 4CONFIG_FSL_LS_PPA=y 5CONFIG_QSPI_AHB_INIT=y 6CONFIG_AHCI=y 7CONFIG_DISTRO_DEFAULTS=y 8CONFIG_NR_DRAM_BANKS=2 9CONFIG_FIT_VERBOSE=y 10CONFIG_OF_BOARD_SETUP=y 11CONFIG_QSPI_BOOT=y 12CONFIG_BOOTDELAY=10 13CONFIG_USE_BOOTARGS=y 14CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" 15CONFIG_MISC_INIT_R=y 16CONFIG_CMD_GPT=y 17CONFIG_CMD_I2C=y 18CONFIG_CMD_MMC=y 19CONFIG_CMD_NAND=y 20CONFIG_CMD_PCI=y 21CONFIG_CMD_SF=y 22CONFIG_CMD_USB=y 23CONFIG_CMD_CACHE=y 24CONFIG_MP=y 25CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" 26CONFIG_OF_CONTROL=y 27CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb" 28CONFIG_ENV_IS_IN_SPI_FLASH=y 29CONFIG_DM=y 30CONFIG_SATA_CEVA=y 31CONFIG_FSL_CAAM=y 32CONFIG_DM_MMC=y 33CONFIG_FSL_ESDHC=y 34CONFIG_SPI_FLASH=y 35# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set 36CONFIG_PHYLIB=y 37CONFIG_PHY_AQUANTIA=y 38CONFIG_E1000=y 39CONFIG_PCI=y 40CONFIG_DM_PCI=y 41CONFIG_DM_PCI_COMPAT=y 42CONFIG_PCIE_LAYERSCAPE=y 43CONFIG_DM_SCSI=y 44CONFIG_SYS_NS16550=y 45CONFIG_SPI=y 46CONFIG_DM_SPI=y 47CONFIG_FSL_QSPI=y 48CONFIG_USB=y 49CONFIG_DM_USB=y 50CONFIG_USB_XHCI_HCD=y 51CONFIG_USB_XHCI_DWC3=y 52CONFIG_EFI_LOADER_BOUNCE_BUFFER=y 53