1CONFIG_ARM=y 2CONFIG_TARGET_LS1046AQDS=y 3CONFIG_FSL_LS_PPA=y 4CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-duart" 5CONFIG_FIT_VERBOSE=y 6CONFIG_OF_BOARD_SETUP=y 7CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL" 8CONFIG_SD_BOOT=y 9CONFIG_BOOTDELAY=10 10CONFIG_USE_BOOTARGS=y 11CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:4m(nand_uboot),36m(nand_kernel),472m(nand_free);spi0.0:2m(uboot),14m(free)" 12CONFIG_SPL=y 13CONFIG_SPL_BOARD_INIT=y 14CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y 15CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110 16CONFIG_HUSH_PARSER=y 17CONFIG_CMD_BOOTZ=y 18CONFIG_CMD_GREPENV=y 19CONFIG_CMD_MEMINFO=y 20CONFIG_CMD_MEMTEST=y 21CONFIG_CMD_GPT=y 22CONFIG_CMD_I2C=y 23CONFIG_CMD_MMC=y 24CONFIG_CMD_NAND=y 25CONFIG_CMD_PCI=y 26CONFIG_CMD_SF=y 27CONFIG_CMD_USB=y 28CONFIG_CMD_DHCP=y 29CONFIG_CMD_MII=y 30CONFIG_CMD_PING=y 31CONFIG_CMD_CACHE=y 32CONFIG_CMD_EXT2=y 33CONFIG_CMD_FAT=y 34# CONFIG_SPL_EFI_PARTITION is not set 35CONFIG_OF_CONTROL=y 36CONFIG_ENV_IS_IN_MMC=y 37CONFIG_DM=y 38CONFIG_FSL_CAAM=y 39CONFIG_MTD_NOR_FLASH=y 40CONFIG_SPI_FLASH=y 41CONFIG_PHYLIB=y 42CONFIG_NETDEVICES=y 43CONFIG_E1000=y 44CONFIG_PCI=y 45CONFIG_DM_PCI=y 46CONFIG_DM_PCI_COMPAT=y 47CONFIG_PCIE_LAYERSCAPE=y 48CONFIG_SYS_NS16550=y 49CONFIG_DM_SPI=y 50CONFIG_FSL_DSPI=y 51CONFIG_USB=y 52CONFIG_DM_USB=y 53