1CONFIG_ARM=y 2CONFIG_TARGET_LS1046AQDS=y 3CONFIG_SYS_TEXT_BASE=0x82000000 4CONFIG_FSL_LS_PPA=y 5CONFIG_SPL_SERIAL_SUPPORT=y 6CONFIG_SPL=y 7CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-duart" 8CONFIG_DISTRO_DEFAULTS=y 9CONFIG_NR_DRAM_BANKS=2 10CONFIG_FIT_VERBOSE=y 11CONFIG_OF_BOARD_SETUP=y 12CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL" 13CONFIG_NAND_BOOT=y 14CONFIG_BOOTDELAY=10 15CONFIG_USE_BOOTARGS=y 16CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:4m(nand_uboot),36m(nand_kernel),472m(nand_free);spi0.0:2m(uboot),14m(free)" 17# CONFIG_USE_BOOTCOMMAND is not set 18CONFIG_MISC_INIT_R=y 19CONFIG_SPL_BOARD_INIT=y 20CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y 21CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110 22CONFIG_CMD_BOOTZ=y 23CONFIG_CMD_IMLS=y 24CONFIG_CMD_GREPENV=y 25CONFIG_CMD_MEMINFO=y 26CONFIG_CMD_MEMTEST=y 27CONFIG_CMD_GPT=y 28CONFIG_CMD_I2C=y 29CONFIG_CMD_MMC=y 30CONFIG_CMD_NAND=y 31CONFIG_CMD_PCI=y 32CONFIG_CMD_SF=y 33CONFIG_CMD_USB=y 34CONFIG_CMD_CACHE=y 35CONFIG_MP=y 36CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:4m(nand_uboot),36m(nand_kernel),472m(nand_free);spi0.0:2m(uboot),14m(free)" 37CONFIG_OF_CONTROL=y 38CONFIG_ENV_IS_IN_NAND=y 39CONFIG_DM=y 40CONFIG_FSL_CAAM=y 41CONFIG_FSL_ESDHC=y 42CONFIG_MTD_NOR_FLASH=y 43CONFIG_SPI_FLASH=y 44CONFIG_PHYLIB=y 45CONFIG_E1000=y 46CONFIG_PCI=y 47CONFIG_DM_PCI=y 48CONFIG_DM_PCI_COMPAT=y 49CONFIG_PCIE_LAYERSCAPE=y 50CONFIG_SYS_NS16550=y 51CONFIG_SPI=y 52CONFIG_DM_SPI=y 53CONFIG_FSL_DSPI=y 54CONFIG_USB=y 55CONFIG_DM_USB=y 56CONFIG_USB_XHCI_HCD=y 57CONFIG_USB_XHCI_DWC3=y 58CONFIG_USB_STORAGE=y 59