1CONFIG_ARM=y
2CONFIG_TARGET_LS1043ARDB=y
3CONFIG_SPL_LIBCOMMON_SUPPORT=y
4CONFIG_SPL_LIBGENERIC_SUPPORT=y
5CONFIG_FSL_LS_PPA=y
6CONFIG_SPL_FSL_LS_PPA=y
7CONFIG_SPL_MMC_SUPPORT=y
8CONFIG_SPL_SERIAL_SUPPORT=y
9CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
10CONFIG_SPL_WATCHDOG_SUPPORT=y
11CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb"
12CONFIG_DISTRO_DEFAULTS=y
13CONFIG_FIT_VERBOSE=y
14CONFIG_OF_BOARD_SETUP=y
15CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT"
16CONFIG_SD_BOOT=y
17CONFIG_ENV_IS_IN_MMC=y
18CONFIG_BOOTDELAY=10
19CONFIG_USE_BOOTARGS=y
20CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)"
21CONFIG_SPL=y
22CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
23CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0
24CONFIG_SPL_ENV_SUPPORT=y
25CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
26CONFIG_CMD_GPT=y
27CONFIG_CMD_I2C=y
28CONFIG_CMD_MMC=y
29CONFIG_CMD_NAND=y
30CONFIG_CMD_SF=y
31CONFIG_CMD_USB=y
32CONFIG_CMD_CACHE=y
33# CONFIG_SPL_EFI_PARTITION is not set
34CONFIG_OF_CONTROL=y
35CONFIG_DM=y
36CONFIG_FSL_CAAM=y
37CONFIG_MTD_NOR_FLASH=y
38CONFIG_SPI_FLASH=y
39CONFIG_PHYLIB=y
40CONFIG_NETDEVICES=y
41CONFIG_PHY_GIGE=y
42CONFIG_E1000=y
43CONFIG_PCI=y
44CONFIG_DM_PCI=y
45CONFIG_DM_PCI_COMPAT=y
46CONFIG_PCIE_LAYERSCAPE=y
47CONFIG_SYS_NS16550=y
48CONFIG_DM_SPI=y
49CONFIG_USB=y
50CONFIG_DM_USB=y
51CONFIG_USB_XHCI_HCD=y
52CONFIG_USB_XHCI_DWC3=y
53CONFIG_USB_STORAGE=y
54