1CONFIG_ARM=y 2CONFIG_TARGET_LS1043ARDB=y 3CONFIG_SPL_LIBCOMMON_SUPPORT=y 4CONFIG_SPL_LIBGENERIC_SUPPORT=y 5CONFIG_FSL_LS_PPA=y 6CONFIG_SPL_MMC_SUPPORT=y 7CONFIG_SPL_SERIAL_SUPPORT=y 8CONFIG_SPL_DRIVERS_MISC_SUPPORT=y 9CONFIG_SPL_WATCHDOG_SUPPORT=y 10CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb" 11CONFIG_DISTRO_DEFAULTS=y 12CONFIG_FIT_VERBOSE=y 13CONFIG_OF_BOARD_SETUP=y 14CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT" 15CONFIG_SD_BOOT=y 16CONFIG_BOOTDELAY=10 17CONFIG_USE_BOOTARGS=y 18CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" 19CONFIG_SPL=y 20CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y 21CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0 22CONFIG_SPL_ENV_SUPPORT=y 23CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y 24CONFIG_CMD_GPT=y 25CONFIG_CMD_I2C=y 26CONFIG_CMD_MMC=y 27CONFIG_CMD_NAND=y 28CONFIG_CMD_SF=y 29CONFIG_CMD_USB=y 30CONFIG_CMD_CACHE=y 31# CONFIG_SPL_EFI_PARTITION is not set 32CONFIG_OF_CONTROL=y 33CONFIG_ENV_IS_IN_MMC=y 34CONFIG_DM=y 35CONFIG_FSL_CAAM=y 36CONFIG_MTD_NOR_FLASH=y 37CONFIG_SPI_FLASH=y 38CONFIG_PHYLIB=y 39CONFIG_NETDEVICES=y 40CONFIG_PHY_GIGE=y 41CONFIG_E1000=y 42CONFIG_PCI=y 43CONFIG_DM_PCI=y 44CONFIG_DM_PCI_COMPAT=y 45CONFIG_PCIE_LAYERSCAPE=y 46CONFIG_SYS_NS16550=y 47CONFIG_DM_SPI=y 48CONFIG_USB=y 49CONFIG_DM_USB=y 50CONFIG_USB_XHCI_HCD=y 51CONFIG_USB_XHCI_DWC3=y 52CONFIG_USB_STORAGE=y 53