1CONFIG_ARM=y 2CONFIG_TARGET_LS1043ARDB=y 3CONFIG_SPL_LIBCOMMON_SUPPORT=y 4CONFIG_SPL_LIBGENERIC_SUPPORT=y 5CONFIG_FSL_LS_PPA=y 6CONFIG_SPL_SERIAL_SUPPORT=y 7CONFIG_SPL_DRIVERS_MISC_SUPPORT=y 8CONFIG_SPL_NAND_SUPPORT=y 9CONFIG_SPL_WATCHDOG_SUPPORT=y 10CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb" 11CONFIG_FIT_VERBOSE=y 12CONFIG_OF_BOARD_SETUP=y 13CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND_BOOT" 14CONFIG_NAND_BOOT=y 15CONFIG_BOOTDELAY=10 16CONFIG_USE_BOOTARGS=y 17CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" 18CONFIG_SPL=y 19CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y 20CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0 21CONFIG_SPL_ENV_SUPPORT=y 22CONFIG_SPL_I2C_SUPPORT=y 23CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y 24CONFIG_HUSH_PARSER=y 25CONFIG_CMD_GPT=y 26CONFIG_CMD_I2C=y 27CONFIG_CMD_MMC=y 28CONFIG_CMD_NAND=y 29CONFIG_CMD_SF=y 30CONFIG_CMD_USB=y 31CONFIG_CMD_DHCP=y 32CONFIG_CMD_PXE=y 33CONFIG_CMD_MII=y 34CONFIG_CMD_PING=y 35CONFIG_CMD_CACHE=y 36CONFIG_CMD_EXT2=y 37CONFIG_CMD_FAT=y 38# CONFIG_SPL_EFI_PARTITION is not set 39CONFIG_OF_CONTROL=y 40CONFIG_ENV_IS_IN_NAND=y 41CONFIG_DM=y 42CONFIG_FSL_CAAM=y 43CONFIG_MTD_NOR_FLASH=y 44CONFIG_SPI_FLASH=y 45CONFIG_PHYLIB=y 46CONFIG_NETDEVICES=y 47CONFIG_PHY_GIGE=y 48CONFIG_E1000=y 49CONFIG_PCI=y 50CONFIG_DM_PCI=y 51CONFIG_DM_PCI_COMPAT=y 52CONFIG_PCIE_LAYERSCAPE=y 53CONFIG_SYS_NS16550=y 54CONFIG_DM_SPI=y 55CONFIG_USB=y 56CONFIG_DM_USB=y 57CONFIG_USB_XHCI_HCD=y 58CONFIG_USB_XHCI_DWC3=y 59CONFIG_USB_STORAGE=y 60