1CONFIG_ARM=y
2CONFIG_TARGET_LS1043AQDS=y
3CONFIG_SYS_TEXT_BASE=0x82000000
4CONFIG_SPL_LIBCOMMON_SUPPORT=y
5CONFIG_SPL_LIBGENERIC_SUPPORT=y
6CONFIG_FSL_LS_PPA=y
7CONFIG_SPL_MMC_SUPPORT=y
8CONFIG_SPL_SERIAL_SUPPORT=y
9CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
10CONFIG_SPL=y
11CONFIG_DISTRO_DEFAULTS=y
12CONFIG_NR_DRAM_BANKS=2
13CONFIG_FIT_VERBOSE=y
14CONFIG_OF_BOARD_SETUP=y
15CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT,SD_BOOT_QSPI"
16CONFIG_SD_BOOT=y
17CONFIG_BOOTDELAY=10
18CONFIG_USE_BOOTARGS=y
19CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)"
20# CONFIG_USE_BOOTCOMMAND is not set
21CONFIG_MISC_INIT_R=y
22CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
23CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0
24CONFIG_SPL_ENV_SUPPORT=y
25CONFIG_SPL_I2C_SUPPORT=y
26CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
27CONFIG_SPL_WATCHDOG_SUPPORT=y
28CONFIG_CMD_BOOTZ=y
29CONFIG_CMD_GREPENV=y
30CONFIG_CMD_MEMINFO=y
31CONFIG_CMD_MEMTEST=y
32CONFIG_CMD_GPT=y
33CONFIG_CMD_I2C=y
34CONFIG_CMD_MMC=y
35CONFIG_CMD_SF=y
36CONFIG_CMD_USB=y
37CONFIG_CMD_CACHE=y
38CONFIG_MP=y
39CONFIG_MTDPARTS_DEFAULT="mtdparts=spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)"
40# CONFIG_SPL_EFI_PARTITION is not set
41CONFIG_OF_CONTROL=y
42CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart"
43CONFIG_ENV_IS_IN_MMC=y
44CONFIG_DM=y
45CONFIG_FSL_CAAM=y
46CONFIG_FSL_ESDHC=y
47CONFIG_SPI_FLASH=y
48CONFIG_PHYLIB=y
49CONFIG_E1000=y
50CONFIG_PCI=y
51CONFIG_DM_PCI=y
52CONFIG_DM_PCI_COMPAT=y
53CONFIG_PCIE_LAYERSCAPE=y
54CONFIG_SYS_NS16550=y
55CONFIG_SPI=y
56CONFIG_DM_SPI=y
57CONFIG_USB=y
58CONFIG_DM_USB=y
59CONFIG_USB_XHCI_HCD=y
60CONFIG_USB_XHCI_DWC3=y
61CONFIG_USB_STORAGE=y
62CONFIG_BLK=y
63CONFIG_DM_MMC=y
64