1CONFIG_ARM=y 2CONFIG_TARGET_LS1043AQDS=y 3CONFIG_SYS_TEXT_BASE=0x82000000 4CONFIG_SPL_LIBCOMMON_SUPPORT=y 5CONFIG_SPL_LIBGENERIC_SUPPORT=y 6CONFIG_FSL_LS_PPA=y 7CONFIG_SPL_MMC_SUPPORT=y 8CONFIG_SPL_SERIAL_SUPPORT=y 9CONFIG_SPL_DRIVERS_MISC_SUPPORT=y 10CONFIG_SPL=y 11CONFIG_DISTRO_DEFAULTS=y 12CONFIG_NR_DRAM_BANKS=2 13CONFIG_FIT_VERBOSE=y 14CONFIG_OF_BOARD_SETUP=y 15CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT,SD_BOOT_QSPI" 16CONFIG_SD_BOOT=y 17CONFIG_BOOTDELAY=10 18CONFIG_USE_BOOTARGS=y 19CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" 20# CONFIG_USE_BOOTCOMMAND is not set 21CONFIG_MISC_INIT_R=y 22CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y 23CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0 24CONFIG_SPL_ENV_SUPPORT=y 25CONFIG_SPL_I2C_SUPPORT=y 26CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y 27CONFIG_SPL_WATCHDOG_SUPPORT=y 28CONFIG_CMD_BOOTZ=y 29CONFIG_CMD_GREPENV=y 30CONFIG_CMD_MEMINFO=y 31CONFIG_CMD_MEMTEST=y 32CONFIG_CMD_GPT=y 33CONFIG_CMD_I2C=y 34CONFIG_CMD_MMC=y 35CONFIG_CMD_SF=y 36CONFIG_CMD_USB=y 37CONFIG_CMD_CACHE=y 38CONFIG_MP=y 39CONFIG_MTDPARTS_DEFAULT="mtdparts=spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" 40# CONFIG_SPL_EFI_PARTITION is not set 41CONFIG_OF_CONTROL=y 42CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart" 43CONFIG_ENV_IS_IN_MMC=y 44CONFIG_DM=y 45CONFIG_FSL_CAAM=y 46CONFIG_FSL_ESDHC=y 47CONFIG_SPI_FLASH=y 48CONFIG_PHYLIB=y 49CONFIG_E1000=y 50CONFIG_PCI=y 51CONFIG_DM_PCI=y 52CONFIG_DM_PCI_COMPAT=y 53CONFIG_PCIE_LAYERSCAPE=y 54CONFIG_SYS_NS16550=y 55CONFIG_SPI=y 56CONFIG_DM_SPI=y 57CONFIG_USB=y 58CONFIG_DM_USB=y 59CONFIG_USB_XHCI_HCD=y 60CONFIG_USB_XHCI_DWC3=y 61CONFIG_USB_STORAGE=y 62CONFIG_BLK=y 63CONFIG_DM_MMC=y 64