1CONFIG_ARM=y
2CONFIG_TARGET_LS1043AQDS=y
3CONFIG_SPL_LIBCOMMON_SUPPORT=y
4CONFIG_SPL_LIBGENERIC_SUPPORT=y
5CONFIG_FSL_LS_PPA=y
6CONFIG_SPL_MMC_SUPPORT=y
7CONFIG_SPL_SERIAL_SUPPORT=y
8CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
9CONFIG_SPL_WATCHDOG_SUPPORT=y
10CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart"
11CONFIG_FIT_VERBOSE=y
12CONFIG_OF_BOARD_SETUP=y
13CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT"
14CONFIG_SD_BOOT=y
15CONFIG_ENV_IS_IN_MMC=y
16CONFIG_BOOTDELAY=10
17CONFIG_USE_BOOTARGS=y
18CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)"
19CONFIG_SPL=y
20CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
21CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0
22CONFIG_SPL_ENV_SUPPORT=y
23CONFIG_SPL_I2C_SUPPORT=y
24CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
25CONFIG_HUSH_PARSER=y
26CONFIG_CMD_BOOTZ=y
27CONFIG_CMD_GREPENV=y
28CONFIG_CMD_MEMINFO=y
29CONFIG_CMD_MEMTEST=y
30CONFIG_CMD_GPT=y
31CONFIG_CMD_I2C=y
32CONFIG_CMD_MMC=y
33CONFIG_CMD_NAND=y
34CONFIG_CMD_SF=y
35CONFIG_CMD_USB=y
36CONFIG_CMD_DHCP=y
37CONFIG_CMD_PXE=y
38CONFIG_CMD_MII=y
39CONFIG_CMD_PING=y
40CONFIG_CMD_CACHE=y
41CONFIG_CMD_EXT2=y
42CONFIG_CMD_FAT=y
43# CONFIG_SPL_EFI_PARTITION is not set
44CONFIG_OF_CONTROL=y
45CONFIG_DM=y
46CONFIG_FSL_CAAM=y
47CONFIG_MTD_NOR_FLASH=y
48CONFIG_SPI_FLASH=y
49CONFIG_PHYLIB=y
50CONFIG_NETDEVICES=y
51CONFIG_E1000=y
52CONFIG_PCI=y
53CONFIG_DM_PCI=y
54CONFIG_DM_PCI_COMPAT=y
55CONFIG_PCIE_LAYERSCAPE=y
56CONFIG_SYS_NS16550=y
57CONFIG_DM_SPI=y
58CONFIG_USB=y
59CONFIG_DM_USB=y
60CONFIG_USB_XHCI_HCD=y
61CONFIG_USB_XHCI_DWC3=y
62CONFIG_USB_STORAGE=y
63