1CONFIG_ARM=y
2CONFIG_ARCH_MX6=y
3CONFIG_SYS_TEXT_BASE=0x17800000
4CONFIG_TARGET_GE_BX50V3=y
5CONFIG_NR_DRAM_BANKS=1
6# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
7CONFIG_FIT=y
8CONFIG_BOOTDELAY=1
9CONFIG_SYS_CONSOLE_IS_IN_ENV=y
10CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
11
12# monitor's EEPROM is connected to the bus through the mux channel 1
13# (the number is the offset in CONFIG_SYS_I2C_BUSES)
14CONFIG_SYS_VPD_EEPROM_I2C_BUS=4
15# Address of Atmel 24C08 EEPROM
16CONFIG_SYS_VPD_EEPROM_I2C_ADDR=0x50
17CONFIG_SYS_VPD_EEPROM_I2C_ADDR_LEN=1
18CONFIG_SYS_VPD_EEPROM_SIZE=1024
19
20CONFIG_SUPPORT_RAW_INITRD=y
21CONFIG_BOARD_EARLY_INIT_F=y
22CONFIG_LAST_STAGE_INIT=y
23CONFIG_HUSH_PARSER=y
24CONFIG_CMD_BOOTZ=y
25# CONFIG_CMD_FLASH is not set
26CONFIG_CMD_GPIO=y
27CONFIG_CMD_I2C=y
28CONFIG_CMD_MMC=y
29CONFIG_CMD_PCI=y
30CONFIG_CMD_SF=y
31# CONFIG_CMD_NFS is not set
32CONFIG_CMD_CACHE=y
33CONFIG_CMD_EXT2=y
34CONFIG_CMD_EXT4=y
35CONFIG_CMD_EXT4_WRITE=y
36CONFIG_CMD_FS_GENERIC=y
37CONFIG_DOS_PARTITION=y
38CONFIG_ENV_IS_IN_SPI_FLASH=y
39CONFIG_BOOTCOUNT_LIMIT=y
40CONFIG_BOOTCOUNT_EXT=y
41CONFIG_BOOTCOUNT_BOOTLIMIT=10
42CONFIG_SYS_BOOTCOUNT_EXT_DEVPART="1:5"
43CONFIG_SYS_BOOTCOUNT_ADDR=0x7000A000
44CONFIG_FSL_ESDHC=y
45CONFIG_SPI_FLASH=y
46CONFIG_SPI_FLASH_STMICRO=y
47CONFIG_SPI_FLASH_WINBOND=y
48CONFIG_E1000=y
49CONFIG_CMD_E1000=y
50CONFIG_MII=y
51CONFIG_SPI=y
52CONFIG_MXC_SPI=y
53CONFIG_IMX_WATCHDOG=y
54CONFIG_OF_LIBFDT=y
55# CONFIG_EFI_LOADER is not set
56