1# The ga10h is an 10" tablet with an A33 or A23 soc, 1G RAM, 8G or 16G nand, 2# sdio wifi, 2 micro usb ports, 1 otg and 1 host and 1 micro sd slot. 3# 4# This defconfig is for the v1.1 pcb with an a33 soc. 5CONFIG_SPL=y 6CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" 7CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-ippo-q8h-v1.2-lcd1024x600" 8CONFIG_USB_MUSB_SUNXI=y 9CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" 10CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" 11CONFIG_AXP_GPIO=y 12CONFIG_VIDEO_LCD_MODE="x:1024,y:600,depth:18,pclk_khz:52000,le:138,ri:162,up:22,lo:10,hs:20,vs:3,sync:3,vmode:0" 13CONFIG_VIDEO_LCD_PANEL_LVDS=y 14CONFIG_VIDEO_LCD_DCLK_PHASE=0 15CONFIG_VIDEO_LCD_POWER="PH7" 16CONFIG_VIDEO_LCD_BL_EN="PH6" 17CONFIG_VIDEO_LCD_BL_PWM="PH0" 18#CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW=n 19CONFIG_ARM=y 20CONFIG_ARCH_SUNXI=y 21CONFIG_MACH_SUN8I_A33=y 22CONFIG_DRAM_CLK=432 23# zq = 0x3bbb 24CONFIG_DRAM_ZQ=15291 25CONFIG_DRAM_ODT_EN=y 26# Wifi power 27CONFIG_AXP221_DLDO1_VOLT=3300 28# aldo1 is connected to VCC-IO, VCC-PD, VCC-USB and VCC-HP 29CONFIG_AXP221_ALDO1_VOLT=3000 30