1# The ga10h is an 10" tablet with an A33 or A23 soc, 1G RAM, 8G or 16G nand,
2# sdio wifi, 2 micro usb ports, 1 otg and 1 host and 1 micro sd slot.
3#
4# This defconfig is for the v1.1 pcb with an a33 soc.
5CONFIG_SPL=y
6CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
7CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-ippo-q8h-v1.2-lcd1024x600"
8CONFIG_USB_MUSB_SUNXI=y
9CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
10CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
11CONFIG_AXP_GPIO=y
12CONFIG_VIDEO_LCD_MODE="x:1024,y:600,depth:18,pclk_khz:52000,le:138,ri:162,up:22,lo:10,hs:20,vs:3,sync:3,vmode:0"
13CONFIG_VIDEO_LCD_PANEL_LVDS=y
14CONFIG_VIDEO_LCD_DCLK_PHASE=0
15CONFIG_VIDEO_LCD_POWER="PH7"
16CONFIG_VIDEO_LCD_BL_EN="PH6"
17CONFIG_VIDEO_LCD_BL_PWM="PH0"
18#CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW=n
19CONFIG_ARM=y
20CONFIG_ARCH_SUNXI=y
21CONFIG_MACH_SUN8I_A33=y
22CONFIG_DRAM_CLK=432
23# zq = 0x3bbb
24CONFIG_DRAM_ZQ=15291
25CONFIG_DRAM_ODT_EN=y
26# Wifi power
27CONFIG_AXP221_DLDO1_VOLT=3300
28# aldo1 is connected to VCC-IO, VCC-PD, VCC-USB and VCC-HP
29CONFIG_AXP221_ALDO1_VOLT=3000
30