xref: /openbmc/u-boot/configs/evb-ast2600a0-spl_defconfig (revision fb79a3bf)

CONFIG_ARM=y
CONFIG_SYS_CONFIG_NAME="evb_ast2600a0_spl"
CONFIG_SPL_LDSCRIPT="arch/$(ARCH)/mach-aspeed/ast2600/u-boot-spl.lds"
CONFIG_ARCH_ASPEED=y
CONFIG_SYS_TEXT_BASE=0x10000
CONFIG_ASPEED_AST2600=y
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL=y
CONFIG_ARMV7_BOOT_SEC_DEFAULT=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_FIT=y
CONFIG_SPL_FIT=y
CONFIG_SPL_FIT_PRINT=y
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS4,115200n8 root=/dev/ram rw"
CONFIG_PRE_CONSOLE_BUFFER=y
CONFIG_PRE_CON_BUF_ADDR=0x10000000
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_DM_RESET=y
CONFIG_SPL_RAM_SUPPORT=y
CONFIG_SPL_RAM_DEVICE=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_HUSH_PARSER=y
# CONFIG_AUTO_COMPLETE is not set
CONFIG_SYS_PROMPT="ast# "
CONFIG_CMD_CLK=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="ast2600a0-evb"
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_USE_ENV_SPI_BUS=y
CONFIG_ENV_SPI_BUS=0
CONFIG_USE_ENV_SPI_CS=y
CONFIG_ENV_SPI_CS=0
CONFIG_USE_ENV_SPI_MAX_HZ=y
CONFIG_ENV_SPI_MAX_HZ=100000000
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
CONFIG_CLK=y
CONFIG_SPL_CLK=y
CONFIG_DM_GPIO=y
CONFIG_ASPEED_GPIO=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_ASPEED=y
CONFIG_MISC=y
CONFIG_DM_MMC=y
CONFIG_MMC_TRACE=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ASPEED=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_PHY_BROADCOM=y
CONFIG_PHY_REALTEK=y
CONFIG_DM_ETH=y
CONFIG_FTGMAC100=y
CONFIG_MDIO=y
CONFIG_PHY=y
CONFIG_PINCTRL=y
CONFIG_DM_SERIAL=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_SYSRESET=y
CONFIG_TEE=y
CONFIG_WDT=y